Visualint VI-M-7650-VT Owner's manual

VI-M-7650-VT
Brand
Visualint
Model
VI-M-7650-VT
Type
Owner's manual
HTTP API MANUAL
pg. 1
18 August 17
This manual explains how to use HTTP-based API of the VIM series. The HTTP-based interface supports
the feature of setting internal values with a specific parameter.
Commands listed are compatible with Release 6 FW running the following Kernel Version:
- IP Camera (Fixed and VariFocal lens): NVSS_V8.1.6.06.00
- PTZ: NVSS_V8.1.11.06.00
Features Added
- Added step movement commands for PTZ models (move in a direction by 10 deg increments).
- Added Set/Get coordinates for PTZ models (get current X:Y:Z position, set an X:Y:Z position).
- Added IR command to control on/off/auto setting.
- Added White Light command to control on/off/auto setting (for PTZ models that support this).
- Added Privacy Mask command to enable / disable.
- Added SMTP command to enable / disable.
- Port Consolidation: The HTTP, API and ONVIF ports have now been combined into a single HTTP port.
Previously used were HTTP (80), API (8090) and ONVIF (8080). You can now use HTTP Port 80 for all 3.
If you change the HTTP port, the other services will follow to that new port number.
Special Notes
The default API credentials are admin / 1111. To change this, login into the camera using the API
credentials, then go to Configuration > User Management. Check the box for the Admin account and choose
“Modify Pwd”. Change the password to the current admin account (default is admin / admin). Once you
have done this, the local admin and API admin accounts will be merged and you can use the same admin
account to authorize login and API commands.
Known Limitations
Commands provided in this manual are currently not compatible with the NVRs.
Snapshot Stream
Example Syntax:
http://ipaddress/snapshot.jpg
Valid entries
ENTRY
DATA FORMAT
DESCRIPTION
COMMENT
N/A
N/A
Provides a single static
JPG image
Send command as-is, no
additional entries needed
RTSP Stream
HTTP API MANUAL
pg. 2
Example Syntax:
rtsp://username:password@ipaddress:Port/1/S treamID
Valid entries
ENTRY
DATA FORMAT
DESCRIPTION
COMMENT
Port
554
Default RTSP port, can be
changed by going to
Configuration > Network
Management > Network
Service > Other > RTSP
Port
Must be a numeric value
StreamID
1 ~ 3
1st Stream, 2nd Stream
or 3rd Stream
Must be a numeric value
VCA Events
Example Syntax:
http://username:password@ipaddress/ISAPI/SystemEx/Video/inputs/channels/1/Rule/RuleID/scenes/SceneID/
VCA/Action
Valid entries
ENTRY
DATA FORMAT
DESCRIPTION
COMMENT
RuleID
1 ~ 8
Corresponds to the Rule
ID
Must be a numeric value
SceneID
1 ~ 16
Corresponds to the Scene
ID
Must be a numeric value
Action
enabled | disabled
Either enables or disables
the VCA event
Video Streams
Example Syntax:
http://username:password@ipaddress/ISAPI/streamingEx/channels/1/Action
Valid entries
ENTRY
DATA FORMAT
DESCRIPTION
COMMENT
Action
enabled | disabled
Enables or disables the
video stream
This disables ONVIF/RTSP,
Web UI will still show video
Digital Output
Example Syntax:
http://username:password@ipaddress/ISAPI/SystemEx/Output/OutputID/Action
Valid entries
ENTRY
DATA FORMAT
DESCRIPTION
COMMENT
OutputID
1 ~ 3
Corresponds to the Alarm
Output
Some models differ on the
amount of outputs available
Action
enabled | disabled
Either enables or disables
HTTP API MANUAL
pg. 3
the Alarm Output
Audio Input
Example Syntax:
http://username:password@ipaddress/ISAPI/SystemEx/Audio/1/Action
Valid entries
ENTRY
DATA FORMAT
DESCRIPTION
COMMENT
Action
enabled | disabled
Either enables or disables
the Audio Input
HTTP MJPEG Stream
Example Syntax:
http://username:password@ipaddress/ISAPI/MjpegStream/1/StreamID
Valid entries
ENTRY
DATA FORMAT
DESCRIPTION
COMMENT
StreamID
1 ~ 2
Corresponds to the 1st
Stream and 2nd Stream
Video Encoding must be set
to MotionJPEG for this to work
Send PTZ to Preset
Example Syntax:
http://username:password@ipaddress/PSIA/PTZCtrlEx/channels/1/presets/PresetID/goto
Valid entries
ENTRY
DATA FORMAT
DESCRIPTION
COMMENT
PresetID
1 ~ 60
Corresponds to the
Preset number.
Must be a numeric value.
Send PTZ to Scene
Example Syntax:
http://username:password@ipaddress/PSIA/PTZCtrlEx/channels/1/scenes/SceneID /goto
Valid entries
ENTRY
DATA FORMAT
DESCRIPTION
COMMENT
SceneID
1 ~ 16
Corresponds to the
Scene.
Must be a numeric value.
PTZ Movement
Example Syntax:
http://username:password@ipaddress/PSIA/PTZCtrlEx/channels/1/controls/Action
Valid entries
ENTRY
DATA FORMAT
DESCRIPTION
COMMENT
Action
up
Moves the PTZ upward
Movement continues until
HTTP API MANUAL
pg. 4
stop command is received.
Action
down
Move the PTZ downward
Movement continues until
stop command is received.
Action
Left
Moves the PTZ to the left
Movement continues until
stop command is received.
Action
Right
Moves the PTZ to the
right
Movement continues until
stop command is received.
Action
Leftup
Moves the PTZ upward
toward the left
Movement continues until
stop command is received.
Action
Rightup
Moves the PTZ upward
toward the right
Movement continues until
stop command is received.
Action
Leftdown
Moves the PTZ downward
toward the left
Movement continues until
stop command is received.
Action
Rightdown
Moves the PTZ downward
toward the right
Movement continues until
stop command is received.
Action
Zoomin
Zooms the PTZ in
Movement continues until
stopped or end is reached.
Action
Zoomout
Zooms the PTZ out
Movement continues until
stopped or end is reached.
Action
stop
Stops all PTZ movement
PTZ Step Movement
Example Syntax:
http://username:password@ipaddress/PSIA/PTZCtrlEx/channels/1/Minicontrols/Action
Valid entries
ENTRY
DATA FORMAT
DESCRIPTION
COMMENT
Action
up
Moves the PTZ up by 10
deg
Movement continues until
stopped or end is reached.
Action
down
Moves the PTZ down by
10 deg
Action
left
Moves the PTZ left by 10
deg
Action
right
Moves the PTZ right by
10 deg
Action
zoomin
Zooms the PTZ in
increments
Action
zoomout
Zooms the PTZ out in
increments
Action
focuson
Turn the auto focus of
the PTZ on
Action
focusoff
Turn the auto focus of
the PTZ off
Get PTZ Coordinates
Example Syntax:
http://username:password@ipaddress/PSIA/PTZCtrlEx/channels/1/GETXYZpoint
HTTP API MANUAL
pg. 5
Valid entries
ENTRY
DATA FORMAT
DESCRIPTION
COMMENT
N/A
N/A
This command will
provide the current XYZ
coordinates of the PTZ
Send command as-is, no
additional entries needed.
Set PTZ Coordinates
Example Syntax:
http://username:password@ipaddress/PSIA/PTZCtrlEx/channels/1/Xpoint/XID/Ypoint/YID/Zoom/ZID
Valid entries
ENTRY
DATA FORMAT
DESCRIPTION
COMMENT
XID
1 ~ 260
Sets the X position
Must be a numeric value.
YID
0 ~ 93
Sets the Y position
Must be a numeric value.
ZID
1 ~ 50
Sets the Zoom position
Must be a numeric value.
IR Control
Example Syntax:
http://username:password@ipaddress/PSIA/IRLamp/channels/1/Action
Valid entries
ENTRY
DATA FORMAT
DESCRIPTION
COMMENT
Action
on | off | auto
Sets the IR lamp settings
Default is auto. If you turn
on, it will always be on.
White Light Control
Example Syntax:
http://username:password@ipaddress/PSIA/WhiteLight/channels/1/Action
Valid entries
ENTRY
DATA FORMAT
DESCRIPTION
COMMENT
Action
on | off | auto
Sets the White Light
settings
Default is auto. If you turn
on, it will always be on.
Privacy Mask
Example Syntax:
http://username:password@ipaddress/ISAPI/PrivacyMask/channels/1/Action
Valid entries
ENTRY
DATA FORMAT
DESCRIPTION
COMMENT
Action
enabled | disabled
Creates a privacy mask
around the entire image
SMTP Mail Server
HTTP API MANUAL
pg. 6
Example Syntax:
http://username:password@ipaddress/ISAPI/SystemEx/Network/mailing/Holdonoff/channels/1/time/Ti
meValue/Action
Valid entries
ENTRY
DATA FORMAT
DESCRIPTION
COMMENT
TimeValue
0 ~ 300
Holds all VCA
notifications until the
time has expired
Must be a numeric value.
Time is in seconds.
Action
enabled | disabled
Either enables or disables
the Hold Time
Email Delay Time
Example Syntax:
http://username:password@ipaddress/ISAPI/SystemEx/Network/mailing/Delayonoff/channels/1/time/T
imeValue/Acti on
Valid entries
ENTRY
DATA FORMAT
DESCRIPTION
COMMENT
TimeValue
0 ~ 300
Sends the first VCA
notification, and delays
all subsequent
notifications until time
has expired.
Must be a numeric value.
Action
enabled | disabled
Either enables or disables
the Delay Time.
Cancel All Emails
Example Syntax:
http://username:password@ipaddress/ISAPI/System/Network/mailing/DelayTimeReset
Valid entries
ENTRY
DATA FORMAT
DESCRIPTION
COMMENT
N/A
N/A
This command will cancel
all pending emails and
purge from memory.
Send command as-is, no
additional entries needed.
SMTP Server
Example Syntax:
http://username:password@ipaddress/ISAPI/SetSMTPState/channels/1/SMTP/Server/Action
Valid entries
ENTRY
DATA FORMAT
DESCRIPTION
COMMENT
Server
1 ~ 2
Listed under Alarm
Management > Email
Alarm
Must be a numeric value.
Action
enabled | disabled
Enables or disables the
Email Alarm SMTP server
HTTP API MANUAL
pg. 7
Success Response Example
<ResponseStatus xmlns="http://www.isapi.org/ver20/XMLSchema" version="2.0">
<requestURL>/ISAPI/streamingEx/channels/1/enabled</requestURL>
<statusCode>1</statusCode>
<statusString>OK</statusString>
<subStatusCode>ok</subStatusCode>
</ResponseStatus>
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Visualint VI-M-7650-VT Owner's manual

VI-M-7650-VT
Brand
Visualint
Model
VI-M-7650-VT
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents