Munters QEN-CDCS-A1808 Owner's manual

Munters
Brand
Munters
Model
QEN-CDCS-A1808
Type
Owner's manual

Munters QEN-CDCS-A1808 is a control system for dehumidifiers that allows users to monitor and adjust the settings of their unit. The system has two access levels, with the higher level requiring a PIN code for access. Once logged in, users can view processing data, set target humidity levels, and reset alarms. The system also includes a number of other features, such as a countdown timer and a maintenance reminder.

Munters QEN-CDCS-A1808 is a control system for dehumidifiers that allows users to monitor and adjust the settings of their unit. The system has two access levels, with the higher level requiring a PIN code for access. Once logged in, users can view processing data, set target humidity levels, and reset alarms. The system also includes a number of other features, such as a countdown timer and a maintenance reminder.

Originalinstructions
QuickGuide
ComDryControlSystem
Operationinstructions
Validforunitsfromserialno.
20001
QEN-CDCS-A1808©MuntersEuropeAB2018
ComDryControlSystem
1ComDryControlSystemQuickGuide
1.1Navigatethemenus
Thethreebuttons,andonthecontrolpanelmakeitpossibletonavigatethemenus.
Followthesestepstonavigatethemenus:
Step
Action
Result/Illustration
1
Toselectamenu,press
or.untiltheselectedmenuappears.
Theselectedmenuindicatorislit.
2
Toenterthemenu,press
.
Themenuindicatorstarts
ashing.
3
Use
ortoscrollthroughthemenu.
4
Leavethemenubyusing
andgoto[EXIT].
Press
.
Themenuindicatorstops
ashing.
NOTE!Allmenulistsarecircular.Attheendofeachmenuyouwillnd
[
EXIT
]
.Thequickestwayofnavigating
thereistopressonetimeafterhavingenteredamenu.
1.2Accesslevels
Thefollowingaccesslevelsandactionsareavailableinthecontrolsystem:
AccesslevelAvailableactions
Comment
ACCESS
Viewallprocessingdata
ACCESS*
■Viewallprocessingdata
■Adjustrelevantparameters(setvalueRH,reset
horkWhetc.)
ACCESS**
■Level2isfordedicatedpersonnelonly
(qualiedpersonnelorMuntersService)
■Ifyouhaveaccidentallyreachedthislevelthe
codeis0000forreturningtolevel1.
1ComDryControlSystemQuickGuideQEN-CDCS-A1808
ComDryControlSystem
1.3Accessthecontrolsystem
Thecontrolsystemsettingsandcountersareprotectedagainstunauthorizedchangeusingtwoaccesslevels.
Seealsosection1.2,Accesslevels.
Followthesestepstoaccessthesystem:
Step
Action
Result/Illustration
1
Tochangethesettingsyoumusthave“one-star”access.Gotomenu
Functions,seesection1.1,Navigatethemenus.
Themenuindicatorisashing.
2
Scrollupto[ACCESS]using
.
3
Pressandhold
until[ACCESS]changesto[ACCESS*].
Thesystemisnowunlocked,
anditispossibletomakenew
settingsalternativelyresetthe
counters.
4
Ahigher,PIN-codeprotected,“two-star”accesslevelexists.Ifanattempt
togethigheraccessismadewiththemachineswitchedoff,thedisplaywill
changeto[0000].
Press
fourtimesuntil[ACCESS*]isvisibleagain.
NOTE!Thesystemwillreturntolockedmodeautomaticallyafterveminuteswithoutanyactivity.
NOTE!Thesystemalwaysstartsinlockedmodeafterpower-up(orpowerfailure),regardlessofaccesslevel
priortounpluggingtheunit.
Followthesestepstoforcethesystemintolockedmode:
Step
Action
Result/Illustration
1
Makesuretheunitisswitchedoff.
2
Gotomenu"Functions"
3
Navigateto[ACCESS*].Seegeneral
instructioninsection1.1,Navigatethemenus.
4
StarttheunitbypressingOn/Off.
Thegreenlightilluminates
5
Pressandhold
until[ACCESS*]changesto[ACCESS].
Thesystemisnowlocked,anditisnotpossibletomakenew
settingsortoresetthecounters.
QEN-CDCS-A1808ComDryControlSystemQuickGuide2
ComDryControlSystem
1.4Changethesystemsettings
Tochangesettingsyoumusthave“one-star”access,see1.3,Accessthecontrolsystem.
Followthesestepstochangethesystemsettings:
Step
Action
Result/Illustration
1
Navigatetotheparameteryouwanttochangewithor.
2
Press
.
Thesettingstartstoash.
3
Example:SetvalueforhumidityintheHumiditymenu.
Changethevaluewithor.
4
Conrmthenewsettingwith
.
Thesettingstopstoash.
NOTE!Ifthenewsettingisnotconrmedwithin30seconds,thedisplaychangesbacktotheoldsetting.
NOTE!Read-onlyvaluesarenotchangeable.Theywillnotstarttoashif
ispressed,regardlessofaccess
level.
1.5Resetanalarm
Followthesestepstoresetanalarm:
Step
Action
Result/Illustration
1
Writedownthealarmmessagebeforeresettingthealarm.The
informationcanbehelpfulwhentroubleshooting.
2
Waituntilthedehumidierhasstopped.
Press
.
Thedisplaychangesto
[RstNO]and[NO]isashing.
3
Toggle[NO]to[YES]bypressing
or.
Conrmbypressing
.
Whenthealarmhasbeenreset,the
menusystemreturnstoitsstartposition.
NOTE!Ifthecauseofanalarmisstillpresent,thealarmcanreappearafterresetting,evenifthedehumidier
isstopped.
3ComDryControlSystemQuickGuideQEN-CDCS-A1808
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Munters QEN-CDCS-A1808 Owner's manual

Munters
Brand
Munters
Model
QEN-CDCS-A1808
Type
Owner's manual

Munters QEN-CDCS-A1808 is a control system for dehumidifiers that allows users to monitor and adjust the settings of their unit. The system has two access levels, with the higher level requiring a PIN code for access. Once logged in, users can view processing data, set target humidity levels, and reset alarms. The system also includes a number of other features, such as a countdown timer and a maintenance reminder.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents