2. Autel
  3. diaglink
diaglink

Autel diaglink User guide

  • Hello! I am an AI chatbot trained to assist you with the Autel diaglink User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Software Update Instructions for Diaglink
Register the Tool:
1.
Please go to Autel website www.autel.com , click Register->Create an Autel ID to create your
own ID first. If you have created Autel ID before, just log in with your own ID directly.
2.
Input the required information, click Create an Autel ID to go ahead.
3.
After creating a new Autel ID, go back to the Home page and Sign in with your Autel ID and
password. You will see the following pages.
4.
Please select Diaglink, fill in the
Serial No.
and
Register Password
to register this scanner to
your Autel ID.
Note:
Please make sure that you put the right serial number and register password. You can check
the serial No. from the back of the scanner and also you can find them from the scanner itself,
open this scanner, go to Setup->About to check them. If there is no way to check the register
password from the scanner, please contact us directly to check the register password for you.
5.
After register this scanner to your Autel ID, please download the
Maxi PC Suite
as following
pictures showing or link:
6.
Install the PC Suite on a Windows computer that can get Internet access.
Update Procedure
Note: You can choose to connect DiagLink to your PC via USB cable or use card
reader/adapter to load the SD card to update your device
.To ensure the
updating process runs smoothly, we highly suggest you to use Card
Reader to load the SD card to do the updating, instead of USB cable.
1.
Please connect your Diaglink to your PC via SD card or USB cable, Diaglink will be booted
up. Select
Update and press OK button to get in.
2.
Run the Maxi PC suite and it will automatically recognize the device to show the following
updating windows.
Note: You can FREE get one vehicle make software as your choice at the first time. And if
you need to download other vehicle make software, you need to purchase it one by one.
Each vehicle software will cost USD 10.
3.
Diaglink provides free service_OBDII software at free. Click Update to download it.
4.
Scroll down the bar to select one vehicle make you need most, then click
Free get
to
download the vehicle software.
5.
Click Installed, you can check what software you have installed in your device.
6.
If you want to download other car makes, please click Purchase button, it will guide you
go to http://pro.auteltech.com/ to purchase it from Autel website.
Note: Before purchasing, please download the first free software via PC suite, otherwise
you will lose access to the free vehicle software.
/