Zipper Mowers ZI-BR160 Owner's manual

Type
Owner's manual

This manual is also suitable for

D
Bedienungsanleitung
Betonverdichter
GB
Operation manual
Concrete Compactor
ES
Manual de instrucciones
Vibrador de hormigón
FR
Mode d´emploi
Vibrateur de béton
ZI-BR160
EAN : 912003923800 5
D
Bedienungsanleitung und Sicher-
heitshinweise vor Erstinbetrieb-
nahme lesen und beachten!
GB
Read the operation manual carefully
before first use.
ES
Lea este manual atentamente an-
tes de usar la máquina!
FR
Lisez attentivement ce manuel avant
d'utiliser la machine!
19/06/2013 Revision 02 - DE/EN/ES/FR
2
D
SICHERHEITSZEICHEN
BEDEUTUNG DER SYMBOLE
GB
SAFETY SIGNS
DEFINITION OF SYMBOLS
ES
SEÑALES DE SEGURIDAD
DEFINICIÓN DE SÍMBOLOS
FR
SIGNALISATION DE SÉCURITÉ
DÉFINITION DES SYMBOLES
D
WARNUNG! Beachten Sie die Sicherheitssymbole! Die Nicht-
beachtung der Vorschriften und Hinweise zum Einsatz des Erdboh-
rers kann zu schweren Personenschäden und tödliche Gefahren
mit sich bringen.
GB
ATTENTION! Ignoring the safety signs and warnings applied
on the machine as well as ignoring the security and operating in-
structions can cause serious injuries and even lead to death.
ES
ATENCIÓN! Ignorar las señales de seguridad y advertencias
aplicadas en la máquina, así como ignorar las instrucciones de
seguridad y el manual de instrucciones, pueden causar lesiones
graves e incluso conducir a la muerte.
FR
ATTENTION! L'ignorance de la signalisation de sécurité et les
avertissements sur la machine et les consignes de sécurité et en
ignorant les instructions, peut causer des blessures graves et
même entraîner la mort.
D
ANLEITUNG LESEN! Lesen Sie die Betriebs- und Wartungs-
anleitung Ihrer Maschine aufmerksam durch und machen Sie sich
mit den Bedienelementen der Maschine gut vertraut um die Ma-
schine ordnungsgemäß zu bedienen und so Schäden an Mensch
und Maschine vorzubeugen.
GB
READ THE MANUAL! Read the user and maintenance manu-
al carefully and get familiar with the controls in order to use the
machine correctly and to avoid injuries and machine defects.
ES
LEA EL MANUAL! Lea el manual de uso y mantenimiento
cuidadosamente y familiarícese con los controles con el fin de
utilizar la quina correctamente, para evitar lesiones y defectos
de la máquina.
FR
LIRE LE MANUEL! Lire le manuel d´utilisateur et de mainte-
nance avec soin et vous familiariser avec les contrôles en vue
d'utiliser la machine correctement et pour éviter les blessures et
les défauts de l'appareil.
3
D
SCHUTZAUSRÜSTUNG! Das Tragen von Gehörschutz,
Schutzbrille sowie Sicherheitsschuhen ist Pflicht.
GB
PROTECTIVE CLOTHING! The operator is obligated to
wear proper ear protection, safety goggles and safety shoes.
ES
ROPA DE PROTECCIÓN! El operador está obligado a llevar
una protección auditiva adecuada, gafas de seguridad y zapatos
de seguridad.
FR
VÊTEMENTS DE PROTECTION! L'opérateur est obligé de
porter des protecteurs d'oreille, lunettes de sécurité et des
chaussures de sécurité.
D
GB
GEFAHR! Das Nachfüllen von Treibstoff bei laufender Maschine
ist untersagt.
DANGER! Refilling of fuel at running machine is forbidden.
ES
FR
PELIGRO! Recargar de combustible la máquina mientras está
en marcha está prohibido.
DANGER! Le rechargement en combustible de la machine
pendant son fonctionnement est interdit.
D
Dieses Produkt entspricht den EG-Richtlinien.
GB
This product complies with EC-directives.
ES
Este producto cumple con las Directivas CE.
FR
Ce produit est conforme aux Directives CE.
16
2 EN
OPERATION MANUAL
Dear Customer!
This manual contains important information and
advice for the correct and safe use and mainte-
nance of the ZIPPER concrete compactor. The
manual is part of the machine and may not be
stored separately. Read it profoundly before first
use of the machine and keep it for later refer-
ence. When the machine is handed to other per-
sons always put the manual to the machine.
Please follow the security instructions!
Due to continuous development of our products
illustrations, pictures might differ slightly.
Attention!
Technical changes reserved!
Copyright
© 2010
This manual is protected by copyright law all
rights reserved. Especially the reprinting as well
as the translation and depiction of pictures will
be prosecuted by law. Court of jurisdiction is
WELS, Austria.
Customer Support
Z.I.P.P.E.R MASCHINEN GmbH
Gewerbepark 8
A-4707 Schlüßlberg
Tel 0043 (0) 7248 61116 - 700
Fax 0043 (0) 7248 61116 720
2.1 Components (Fig. A, B)
2.2 Technical details
Technical changes reserved.
2.3 Included in Delivery
Unpack the ZIPPER concrete compactor ZI-
BR160 and check the machine for any transport
damage and for completeness of delivery.
2.4 SAFETY INSTRUCTIONS
The ZIPPER concrete compactor shall be used
only for the compaction from concrete subfloors.
ZIPPER MASCHINEN cannot be held responsible
for any injuries or damages if there was per-
formed manipulation or adjustments to the ma-
chine.
1
Main body of the machine
2
Vibration hose
Engine type
1-cylinder 4-stroke
OHV-engine
Engine power
4 kW
Engine speed
4000 rpm
Starter
Recoil
Fuel type
Unleaded petrol
Fuel capacity
3,6 Litres
Cylinder diameter
Ø38 mm
Tube length
6 m
Packing size main body
530x420x470 mm
Packing size tube
800x680x70mm
mm
Sound power level LWA
103 dB(A)
Weight
22 kg
17
Don’t operate the machine at insufficient
lighting conditions.
Do not operate the machine when you
are tired, when your concentration is
impaired, and/or under the influence of
drugs, medication or alcohol.
Always be focused when working, take
care to maintain a safe posture at every
time.
Do not use the compactor on a slope
steeper than 10°.
Do not work on slippery ground.
The operation of the machine on icy or
snowy ground is forbidden!
Slipping/ stumbling/ falling down are a
frequent cause of severe injuries.
The machine shall be used only by
trained persons.
Non authorized persons, especially chil-
dren, shall be kept away from the work
area.
Do not wear loose clothing, long hair
openly or loose jewellery like necklaces
etc. when operating the machine.
They might be catched by rotating parts
and cause serious injuries.
Danger of Burning! During working
hot exhaust gases escape and some
parts like the engine are getting very
hot.
Use proper safety clothing and de-
vices when operating the machine
(safety gloves, safety goggles, ear
protectors, safety shoes …)!
The machine’s only allowed to be
used outdoors or good ventilated
rooms.
If there are some components still
hot, the machine won’t be allowed to
be stored.
2.4.1 Remaining risks
Even if you abide by all the safety regulations
you’ll have to attend following remaining
risks:
Danger of vibrations:
The operator should have breaks regu-
larly and shirk a longer working period.
Through the vibrations the blood flow
gets disturbed and the joints get very
loaded.
Danger by the working area:
Take care of unprotected holes or other
sources of danger.
Danger by sound
Working without ear protectors can dam-
age the hearing.
2.5 Operation instructions
IM P ORTANT
Do not operate the engine at maxi-
mum speed right from the start, as
the engine itself as well as the gear-
ing components need a running-in
time. The engine itself reaches its
maximum capacity after the first 10
hours of operation. Non-compliance
with this instruction reduces your en-
gine lifespan substantially.
During refuelling open light, fire, sparks
or smoking is forbidden.
Don’t refuel when the engine’s running
or some components are still hot.
Only refuel outdoors or in good venti-
lated rooms.
Always wipe off spilt fuel immediately.
Fuel is flammable easily!
18
2.5.1 Fitting the vibration tube (Fig. C,
D)
Pull the cotter pin 3 out of the fitting 4. Put
the tube 5 into the fitting and secure it with
the cotter pin.
2.5.2 Starting (Fig. E, F, G)
Cold start:
Turn the ignition 11 to the position
ON.
Turn the throttle control 6 to idling
mixture (direction right).
Open the petrol cock 8 (right position).
Turn on the choker 7 (left position).
Now pull at the cable control power-
fully. If the machine doesn’t start
you’ll have to accelerate a bit.
When you have accelerated and the
engine runs you have to set idling mix-
ture again.
Turn off the choker (right position).
Let the engine run about 3 minutes
before beginning to work.
Set the required speed and begin to
work.
Warm start:
Let the choker turned off.
You have to do the other steps like the
steps of the cold start.
2.5.3 Stopping
Turn back the throttle control to idling
mixture.
Switch off the ignition.
Turn off the petrol cock.
Wait till the machine stands still for de-
positing the tube.
Before storing you have to wait till the
machine gets cold.
2.5.4 Placement of the machine (Fig.
H)
Place the machine on a flat ground.
Pull the lock bolt 12 upwards.
Turn the machine a bit so that you can
release the bolt without locking the ma-
chine again.
Before transporting the machine the next
time, it must be locked again.
2.6 Maintenance
A TT E NT ION
DA NGER !
No cleaning, upkeep, checks or
maintenance when machine is run-
ning
Be safe: Shut off the machine, let it cool
down, disconnect spark plug cap from
spark plug.
The machine does not require intense mainte-
nance. However, to ensure a long lifespan, we
strongly recommend following the upkeep and
maintenance plan.
Repairs must be carried out by specialists! Use
original ZIPPER parts only!
2.6.1 Upkeep and maintenance plan
Controls for the maintenance of the machine
Loose or lost
screws, nuts, bolts
Regularly prior to
each operation
Damage of any part
of the machine
Regularly prior to
each operation
Controlling the oil
level
Regularly prior to
each operation
Machine cleaning
Regularly after op-
eration
Clean spark plug
Every 25 working
hours
Clean air filter
Every 20-30 work-
ing hours
2.6.2 Refuelling
The machine is run by unleaded petrol.
Ensure yourself that no particles get into
the fuel tank when refuelling, so always
use the filter that is under the tank cover
9. Use unleaded petrol because it is better for
the environment than leaded ones.
19
2.6.3 Cleaning
Clean the machine from concrete, dust, etc
Clean the machine housing with a wet cloth
and a mild cleaning solution.
IM P ORTANT
The usage of solvents, aggressive
chemicals or scouring agents
damages the machine housing.
2.6.4 Cleaning the spark plug (Fig. I)
Take off the spark plug cap 14. Loosen and
remove the spark plug 15. Clean it with a
small brush from soot debris.
The contact distance shall account approx. 0,
5mm or ~ credit card thickness.
2.6.5 Controlling the oil level (Fig. H)
Open the oil screw 13 and control the oil
level. If there’s too less oil you have to refill
some oil before starting the machine again.
2.6.6 Cleaning the air filter (Fig. J, K,
L)
A clogged air filter reduces the engines power
output drastically and causes engine
disfunction. Furthermore it reduces the en-
gines lifespan!
Loosen the nut 16 and remove the air filter
from the machine (Fig. K). Disassemble it in
its components (Fig. L)
Clean the air filter with water. Wring it out
strongly. Let it dry. Drip some drops of oil
onto the filter. Mount the filter back.
2.6.7 Disposal
DO NOT dispose your ZI-
BR160 in the residual
waste! Contact your local
authorities for information
about best available dis-
posal possibilities in your
area. Drain fuel from the
fuel tank completely before
disposing the machine. Disaggregate the
compactor into its components before dispos-
ing its components.
2.6.8 Storage
Before storing the machine must be
cold and cleaned!
When you store the machine longer than 30
days:
Drain fuel from fuel tank.
Remove the spark plug, pour into the cyl-
inder some drops of motor oil. Now pull
the starter cable out slowly so that the
engine revolutes several times in order to
distribute the oil in the whole combustion
chamber. Clean the spark plug and
mount it back.
Cover the machine with a cloth sheet and
store it at a dry place.
2.7 Spare part order
With original ZIPPER spare parts you use parts
that are attuned to each other and shorten the
installation time and elongate your machines
lifespan.
HI NWEI S
The installation of non-original parts renders
warranty null and void.
So only use original spare parts!
Send your spare part list inquiry to the reseller you
acquired the machine from or to the ZIPPER Cus-
tomer Service.
You find the order address in the preface of this
operation manual.
20
2.8 Spare part lists and spare part drawings
Crankshaft case-assembly
Pos.
Name
Pcs.
1
Drain plug
2
2
Washer, drain plug
2
3
Oil seal, crankshaft
2
4
Crankshaft case
1
5
Regulating sway bar
1
6
Washer
1
7
Split pin
1
8
Regulating shaft
1
9
Snap ring
1
10
Driven gear assembly
1
11
Dipstick with seal
2
12
Case cover, crankshaft case
1
13
Gasket, crankshaft case
1
14
Bearing 6205
2
15
Set pin Ø8x14
2
16
Bolt M8x35
6
21
Cylinder head and cylinder head cover-assembly
Pos.
Name
Pcs.
1
Bolt M6x12
6
2
Cylinder head cover
1
3
Gasket, cylinder head cover
1
4
Valve rocket assembly
1
(2x)
5
Push guide
1
6
Cap
1
7
Exhaust spring seat
1
8
Intake spring seat
1
9
Valve spring
2
10
Bolt M8x60
4
11
Stud A M8x34
2
12
Cylinder head assembly
1
13
Cylinder head gasket
1
14
Set pin
2
15
Exhaust valve
1
16
Intake valve
1
17
Tappet
2
18
Pusher
2
19
Stud A M6x112
2
20
Lead wind cover
1
22
Crankshaft and camshaft assembly
Pos.
Name
Pcs.
1
Piston ring set
1
2
Piston pin circlip
2
3
Piston
1
4
Piston pin
1
5
Connect rod assembly
1
6
Crankshaft assembly
1
7
Camshaft assembly
1
8
Fly wheel
1
9
Fly wheel fan
1
10
Starting flange
1
11
Nut M14x1,5
1
23
Recoil starter and ignition coil assembly
Pos.
Name
Pcs.
1
Engine switch
1
2
Fan hood
1
3
Bolt M6x12
5
4
Bolt M6x8
4
5
Recoil starter assembly
1
6
Shroud comp.
1
7
Diode
1
8
Oil sensor
1
9
Bolt M6x14
2
10
Bolt M6x22
2
11
Ignition coil assembly
1
12
Spark plug F6RT CU
1
24
Air filter assembly and muffler
Pos.
Name
Pcs.
1
Air filter assembly
1
2
Nut M6
2
3
Bolt M6x22
1
4
Air duck
1
5
Exhaust muffler assembly
1
6
Exhaust gasket
1
7
Nut M8
2
25
Fuel supply system
Pos.
Name
Pcs.
1
Pipe clamp
2
2
Fuel pipe Ø435x170
1
3
Bolt M6x28
1
4
Connection, fuel pipe
1
5
Packing ring
1
6
Nut M6
2
7
Filter cap
1
8
Fuel tank cup
1
9
Fuel tank
1
10
Inlet gasket
1
11
Connection block
1
12
Carburettor gasket
1
13
Carburettor assembly
1
14
Air filter gasket
1
15
Regulating control assembly
1
16
Back spring
1
17
Regulating spring
1
18
Pushing rod
1
19
Lock bolt
1
20
Regulating arm
1
21
Bolt M6
1
30
3.8 Despiece y lista de recambios
Carter
Pos.
Name
Pcs.
1
Drain plug
2
2
Washer, drain plug
2
3
Oil seal, crankshaft
2
4
Crankshaft case
1
5
Regulating sway bar
1
6
Washer
1
7
Split pin
1
8
Regulating shaft
1
9
Snap ring
1
10
Driven gear assembly
1
11
Dipstick with seal
2
12
Case cover, crankshaft case
1
13
Gasket, crankshaft case
1
14
Bearing 6205
2
15
Set pin Ø8x14
2
16
Bolt M8x35
6
31
Culata, tapa del culata
Pos.
Name
Pcs.
1
Bolt M6x12
6
2
Cylinder head cover
1
3
Gasket, cylinder head cover
1
4
Valve rocket assembly
1
(2x)
5
Push guide
1
6
Cap
1
7
Exhaust spring seat
1
8
Intake spring seat
1
9
Valve spring
2
10
Bolt M8x60
4
11
Stud A M8x34
2
12
Cylinder head assembly
1
13
Cylinder head gasket
1
14
Set pin
2
15
Exhaust valve
1
16
Intake valve
1
17
Tappet
2
18
Pusher
2
19
Stud A M6x112
2
20
Lead wind cover
1
32
Carter y montaje de levas
Pos.
Name
Pcs.
1
Piston ring set
1
2
Piston pin circlip
2
3
Piston
1
4
Piston pin
1
5
Connect rod assembly
1
6
Crankshaft assembly
1
7
Camshaft assembly
1
8
Fly wheel
1
9
Fly wheel fan
1
10
Starting flange
1
11
Nut M14x1,5
1
33
Arranque de retroceso y encendido por bobina
Pos.
Name
Pcs.
1
Engine switch
1
2
Fan hood
1
3
Bolt M6x12
5
4
Bolt M6x8
4
5
Recoil starter assembly
1
6
Shroud comp.
1
7
Diode
1
8
Oil sensor
1
9
Bolt M6x14
2
10
Bolt M6x22
2
11
Ignition coil assembly
1
12
Spark plug F6RT CU
1
34
Filtro de aire y silenciador
Pos.
Name
Pcs.
1
Air filter assembly
1
2
Nut M6
2
3
Bolt M6x22
1
4
Air duck
1
5
Exhaust muffler assembly
1
6
Exhaust gasket
1
7
Nut M8
2
35
Alimentación del motor
Pos.
Name
Pcs.
1
Pipe clamp
2
2
Fuel pipe Ø435x170
1
3
Bolt M6x28
1
4
Connection, fuel pipe
1
5
Packing ring
1
6
Nut M6
2
7
Filter cap
1
8
Fuel tank cup
1
9
Fuel tank
1
10
Inlet gasket
1
11
Connection block
1
12
Carburettor gasket
1
13
Carburettor assembly
1
14
Air filter gasket
1
15
Regulating control assembly
1
16
Back spring
1
17
Regulating spring
1
18
Pushing rod
1
19
Lock bolt
1
20
Regulating arm
1
21
Bolt M6
1
40
4.8 Pièces détachées et liste des pièces
Carter
Pos.
Name
Pcs.
1
Drain plug
2
2
Washer, drain plug
2
3
Oil seal, crankshaft
2
4
Crankshaft case
1
5
Regulating sway bar
1
6
Washer
1
7
Split pin
1
8
Regulating shaft
1
9
Snap ring
1
10
Driven gear assembly
1
11
Dipstick with seal
2
12
Case cover, crankshaft case
1
13
Gasket, crankshaft case
1
14
Bearing 6205
2
15
Set pin Ø8x14
2
16
Bolt M8x35
6
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46

Zipper Mowers ZI-BR160 Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI