BevLes, Inc. RA70-CL40 Datasheet

Type
Datasheet

BevLes, Inc. RA70-CL40 is a high-quality aluminum rack designed to hold 18” x 26” bun pans by the lip, so intermediate pan support ribs do not interfere with high profile products. It features four removable louvered pan support sections that allow for fast and easy cleaning.

The RA70-CL40 is made of durable materials, including a 1½” square tubing bottom and top frame that is welded at all corners to heavy-duty 1½” x 1½” extruded angle uprights. It also has extruded tie bars bolted horizontally at the front and rear, and a .190 aluminum caster mounting plate welded to each corner of the bottom frame.

BevLes, Inc. RA70-CL40 is a high-quality aluminum rack designed to hold 18” x 26” bun pans by the lip, so intermediate pan support ribs do not interfere with high profile products. It features four removable louvered pan support sections that allow for fast and easy cleaning.

The RA70-CL40 is made of durable materials, including a 1½” square tubing bottom and top frame that is welded at all corners to heavy-duty 1½” x 1½” extruded angle uprights. It also has extruded tie bars bolted horizontally at the front and rear, and a .190 aluminum caster mounting plate welded to each corner of the bottom frame.

Options & Accessories
Corner bumpers
Perimeter bumper
Vertical pan stop
5” polyurethane casters
Warranty & Cerifications
Parts and Service Warranty
Protected by BevLes 2 year parts and 1
year service warranty
Certified by the following:
CUT N’ LOUVERED
Racks
Mailing: 729 Third Ave., Dallas, TX 75226 • Shipping: 1938 Wyott Dr., Cheyenne, WY 82007
(800) 441-1601 • Fax: (214) 565-0976 • www.bevles.com • [email protected]
Design Features
• Four removable louvered pan support
sections allow for fast and easy cleaning
• Racks hold 18” x 26” bun pans by the lip,
so intermediate pan support ribs do not
interfere with high profile products
• Selective spacing on 1½” centers
Quality Construction
All aluminum construction
Bottom and top frame constructed of
durable 1½” square tubing that is welded
at all corners to heavy-duty 1½” x 1½”
extruded angle uprights
Extruded tie bars bolted horizontally at
front and rear
.190 aluminum caster mounting plate is
welded to each corner of the bottom frame
All racks are mounted on 5” heavy-duty
plate-type, neoprene casters
Model: RA70-CL40
Mailing: 729 Third Ave., Dallas, TX 75226 • Shipping: 1938 Wyott Dr., Cheyenne, WY 82007
(800) 441-1601 • Fax: (214) 565-0976 • www.bevles.com • [email protected]
* Note: Modifications involving casters or legs may affect height of equipment. Specifications subject to change without notice.
CUT N’ LOUVERED
Racks
Construction
Bottom and top frame consist of durable 1½”
square tube heliarc welded at all corners
Uprights are 1½” x 1½” extruded angle heliarc
welded to bottom and top frames
Tie bar is a custom extruded shape mounted
horizontally at front and rear of rack
Side panels are aluminum formed and
louvered to create pan supports that allow
for easy cleaning
Bottom frame has .190 aluminum caster
mounting plates heliarc welded to corners
Pan Supports
Aluminum side panels louvered on 1½” centers
to hold 18” x 26” pans (lip supported)
Casters
Heavy-duty plate-type casters, all swivel, with 5”
neoprene wheels
Shipping
Freight Class: 125
FOB: Cheyenne, WY 82007
FRONT
SIDE
D
D
W
W
H
Model
Capacity Dimensions
Ship Wt. Act. Wt.
18x26 12x20 SPC’G H W D
RA70-CL40 40 --- 1½” 70” (177.8 cm) 21½” (54.6 cm) 26” (66 cm) 62 lbs (28.1 kg) 47 lbs (21.3 kg)
TOP
6/20/05
#B501
Model: RA70-CL40
  • Page 1 1
  • Page 2 2

BevLes, Inc. RA70-CL40 Datasheet

Type
Datasheet

BevLes, Inc. RA70-CL40 is a high-quality aluminum rack designed to hold 18” x 26” bun pans by the lip, so intermediate pan support ribs do not interfere with high profile products. It features four removable louvered pan support sections that allow for fast and easy cleaning.

The RA70-CL40 is made of durable materials, including a 1½” square tubing bottom and top frame that is welded at all corners to heavy-duty 1½” x 1½” extruded angle uprights. It also has extruded tie bars bolted horizontally at the front and rear, and a .190 aluminum caster mounting plate welded to each corner of the bottom frame.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI