© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
GO-55000-317_DBL_LST_EN_0804.PDF • PAGE 1
ABuilding Safety. Building Security.
Optical Smoke Detector
GO-55000-317
Description
The Optical Smoke Detector GO-55000-317 uses the
scattered light principle and was developed for the de-
tection of smoke particles in a wide range of fi re de-
tection applications. The modern design of the sensing
chamber allows to reliably evaluate the characteristics
of fi re.
Addressable conventional technology is used for alarm
transmission to the fi re detection control panel. By
means of the optional Address Module NG60-1, each
detector can be addressed individually. With that, the
activated detector can also be safely identifi ed directly
on the control panel.
The detector can be attached to various bases and it
can be protected against theft.
• Addressable conventional technology
• Individual detector addressing by
means of optional address module
• Optional connection of remote
indicator
• Sealed electronics
Specifi cations
Operating voltage Supply through the detector line voltage
Current consumption typ. 40µA (quiescent)
Ambient temperature -20°C to +60°C (no condensation or icing)
Relative humidity 0 – 95% (no condensation)
Dimensions ø × H 100 × 42 (mm)
Colour white
Weight 100g
Approval VdS G200017
Order number 241026
Order name Optical Smoke Detector/Conv./65/Apo GO-55000-317
-
1
