Master Mark 95340 Installation guide

MASTER MARK

INSTALLING LANDSCAPE EDGING

Models: Terrace Board Black, Terrace Board Brown

Page 1 of 2

Step 1. Preparing your materials

Make plastic edging easier to work with by laying the unrolled coil in the sun to warm, which will

increase its flexibility. Warning: If you place edging on grass, its dark color will attract heat and kill the

underlying grass. Allow no more than 20 minutes on grass.

Step 2. Dig your trench

Use a rope or garden hose to lay out a line where you plan to install the edging. Trench approximately

4 In. to 5 In. depending on the type of edging and desired appearance.

Step 3. Install edging

Use included stakes to secure edging on the inside of the landscape bed.

Step 4. Fill bed

With edging secure, fill inside of landscape bed with rocks, mulch, or other decorative materials

This manual is also suitable for

Download PDF