KYOCERA CS-8030 Operating instructions

Type
Operating instructions

This manual is also suitable for

i
Introduction
Trademark Information
Ethernet is a registered trademark of Xerox Corporation.
Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.
Macintosh and Mac OS are registered trademarks of Apple Computer, Inc. in the USA.
All other company and product names contained in this Operation Guide are trademarks or
registered trademarks of their respective companies. The designations ™ and ® will not be used in
this Operation Guide.
All rights reserved. No part of this material may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying, recording or by any information storage
and retrieval system, without permission in writing from the Publisher.
Legal Restriction On Copying
It may be prohibited to copy copyrighted material without permission of the copyright owner.
It is prohibited under any circumstances to copy domestic or foreign currencies.
Copying other items may be prohibited.
About this Operation Guide
This Operation Guide is meant to be read when using Scan to Mac and TWAIN for Mac to store
scan data to a Macintosh computer. This Operation Guide explains the procedures of installation
and uninstallation and the basic operation method of each utility.
Since the settings may vary depending on the environment of the Macintosh computer to be
connected, read the necessary sections for proper setting.
This Operation Guide should also be read and used together with the Functions Edition of the
appropriate Operation Guide (On-Line Manual) that is on the included Kyocera Document Library
CD-ROM. The Functions Edition of the Operation Guide (On-Line Manual) explains how to scan
and various setting methods.
Important:
The use of scanned legally copyrighted materials, such as documents, musical scores, pictures,
woodblock prints, maps, drawings and photographs, for any intent other than your own personal or
home use, or other such purpose, is prohibited under the copyright law without prior permission
from the legal copyright owner.
Simply scanning the following items may result in legal penalty:
Bank notes, coins, government-issue securities, national bonds, local bonds, foreign currencies and
securities, unused postage stamps, government post cards, government stamps, and securities
regulated by the liquor tax law.
Other items that you should also not scan:
It is additionally recommended that you do not attempt to scan government-issue passports, or
licenses, permits, ID cards, securities, commuter tickets, passes, books of tickets and meal coupons
issued by public organizations or private parties.
ii
Getting connected
For scanning with each utility, the following procedure is needed.
Connect the scanner to a Macintosh computer
<Example connection>
Operation of scanner: Refer to the Set up Edition of the Operation Guide for the scanner.
Operation on Macintosh
Network cable
Scanner
Macintosh
Hub
Connect the scanner to the Macintosh
computer through a network cable
(100BASE-TX or 10BASE-T).
Basic scanner settings (register the host name and IP address, etc.)
Registering and editing user information
Date/time and time difference settings
Scan to Mac: Refer to Installing Scan to Mac on page 1.
Saves the scanned image as a data file on your computer.
TWAIN for Mac: Refer to Installing TWAIN for Mac on page 5.
Captures the picture image to a TWAIN-compatible application.
You’re now ready to scan!
iii
Contents
Introduction ............................................................................................................. i
Trademark Information ..................................................................................................................... i
About this Operation Guide .............................................................................................................. i
Important: ......................................................................................................................................... i
Getting connected ........................................................................................................................... ii
1 Scan to Mac ............................................................................................................ 1
Outline of Scan to Mac .................................................................................................................... 1
Installation and uninstallation .......................................................................................................... 1
Setting the folder ............................................................................................................................. 2
Operating Scan to Mac .................................................................................................................... 4
2 TWAIN for Mac ........................................................................................................ 5
Outline of TWAIN for Mac ................................................................................................................ 5
Installation and uninstallation .......................................................................................................... 5
Setting the scanner .......................................................................................................................... 7
Operating TWAIN for Mac ............................................................................................................... 7
Appendix ............................................................................................................................ 9
System requirements ....................................................................................................................... 9
iv
1
1 Scan to Mac
Outline of Scan to Mac
Scan to Mac is a utility that allows an image captured with the scanner to be received on a
Macintosh computer and to be stored in a specified folder.
To use this utility, you must set the destination on the scanner. For details, refer to the Set up Edition
of the Operation Guide for the scanner.
Installation and uninstallation
Installing Scan to Mac
Perform the following procedure to install Scan to Mac.
1
Start Macintosh. Close any applications that are running.
2
Insert the supplied CD-ROM into the optical drive.
3
Double-click the CD-ROM icon.
4
Open the [ScanToMac] folder.
5
Double-click [Scan to Mac for OS9] or [Scan to Mac OS X] according to your Mac OS.
If the operating system is Mac OS 10.1 or later, the authentication screen is displayed. Enter the
administrator name and password and click [OK].
6
The description concerning the license agreement is displayed. To accept the terms and conditions,
click [Accept].
7
Click [Install].
Installation of Scan to Mac starts. Follow the
instructions displayed on the screen to
install Scan to Mac.
Scan to Mac
2
Uninstalling Scan to Mac
Perform the following procedure to uninstall Scan to Mac.
1
Start Macintosh. Close any applications that are running.
2
Insert the supplied CD-ROM into the optical drive.
3
Double-click the CD-ROM icon.
4
Open the [ScanToMac] folder.
5
Double-click [Scan to Mac for OS9] or [Scan to Mac OS X] according to your Mac OS.
If the operating system is Mac OS 10.1 or later, the authentication screen is displayed. Enter the
administrator name and password and click [OK].
6
The description concerning the license agreement is displayed. To accept the terms and conditions,
click [Accept].
7
Select [Uninstall] from the pull-down menu
at the upper left and click [Uninstall].
Uninstallation of Scan to Mac starts. Follow
the instructions displayed on the screen to
uninstall Scan to Mac.
Setting the folder
Set the folder in which images sent from the scanner are stored. Use the following method to open
the main dialog for setting the folder.
For Mac OS 10.1 or later
Open the [Application]/[Utilities] folder and double-click [KM Scan to Mac].
For Mac OS 9.1 to 9.22
Open the [Kyocera Scan to Mac] folder on the desktop and double-click [KM Scan to Mac].
Scan to Mac
3
Main dialog
This section explains the main dialog for Scan to Mac.
For Mac OS 10.1 or later
1 Connection status: Displays the status of the scanner.
2 Image files: Displays the status of reception of image.
3List: Click to display the list of received images.
4 Show preferences: Click to switch display/non-display of the setting fields for [Destination
Folders] and [File name prefix].
5 Destination Folders: Displays folders in which images are stored as a list.
6Add: Click to add a destination folder for storing images. The folder number, folder location,
and password can be set.
7Edit: Click to change the setting for a destination folder.
8 Delete: Click to delete a destination folder.
9 File name prefix: Set the storage name of an image here. If [Scanner default] is input, the file
name that has been set on the scanner is used.
10 Apply: Click to apply the changed data.
11 Quit: Click to terminate this dialog.
1
2
4
5
9
3
6
7
8
10
11
Scan to Mac
4
For Mac OS 9.1 to 9.22
1 Connection status: Displays the status of the scanner.
2 Image Files: Displays the status of reception of image.
3List: Click to display the list of received images.
4Show/Hide preferences: Click to switch display/non-display of the setting fields for
[Destination folders], [TIFF application] and [File name prefix].
5 Destination folders: Displays folders in which images are stored as a list.
6Add: Click to add a destination folder for storing images. The folder number, folder location,
and password can be set.
7Edit: Click to change the setting for a destination folder.
8Delete: Click to delete a destination folder.
9 TIFF application: Click [Browse] to specify an application for opening the images stored in the
TIFF format.
Note The image file format is set on the scanner when the image is scanned.
10 File name prefix: Set the storage name of an image here. If [Scanner default] is input, the file
name that has been set on the scanner is used.
11 Apply: Click to apply the changed data.
12 Quit: Click to terminate this dialog.
Operating Scan to Mac
Set a Macintosh computer and folder as destination on the scanner and scan the original. For
details, refer to the Set up Edition of the Operation Guide for the scanner.
9
1
2
3
4
5
6
7
8
10
11
12
5
2 TWAIN for Mac
Outline of TWAIN for Mac
TWAIN for Mac is a utility that allows scanning from a TWAIN-compatible application and image
capture with easy operation.
TWAIN for Mac can be used on Mac OS 10.1 or later. Also, a TWAIN-compatible application must
be installed.
Installation and uninstallation
Installing TWAIN for Mac
Perform the following procedure to install TWAIN for Mac.
1
Start Macintosh. Close any applications that are running.
2
Insert the supplied CD-ROM into the optical drive.
3
Double-click the CD-ROM icon.
4
Open the [TWAINforMac] folder.
5
Double-click [TWAIN for Mac OS X].
6
The authentication screen is displayed. Enter the administrator name and password and click [OK].
7
The description concerning the license agreement is displayed. To accept the terms and conditions,
click [Accept].
8
Click [Install].
Installation of TWAIN for Mac starts. Follow
the instructions displayed on the screen to
install TWAIN for Mac.
9
After the installation is complete, set the scanner. Click
[Configure] to open [System Preference]. For the
method of setting, refer to Setting the scanner on
page 7.
TWAIN for Mac
6
Uninstalling TWAIN for Mac
Perform the following procedure to uninstall TWAIN for Mac.
1
Start Macintosh. Close any applications that are running.
2
Insert the supplied CD-ROM into the optical drive.
3
Double-click the CD-ROM icon.
4
Open the [TWAINforMac] folder.
5
Double-click [TWAIN for Mac OS X].
6
The authentication screen is displayed. Enter the administrator name and password and click [OK].
7
The description concerning the license agreement is displayed. To accept the terms and conditions,
click [Accept].
8
Select [Uninstall] from the pull-down menu
at the upper left and click [Uninstall].
Uninstallation of TWAIN for Mac starts.
Follow the instructions displayed on the
screen to uninstall TWAIN for Mac.
TWAIN for Mac
7
Setting the scanner
Set the scanner to be operated from a TWAIN-compatible application. Double-click [Kyocera
Scanners] in [System Preference] to open the scanner dialog.
Scanner dialog
This section explains the scanner dialog.
1 Devices: The names, models, and IP addresses of scanners that have been set are displayed
as a list.
2Add: Click to add a scanner. The name, model, and IP address of the scanner can be set. Also,
the department management can be set if necessary. For details of the department
management, refer to the Oepration Guide for the machine.
3Edit: Click to change the setting for a scanner.
4 Delete: Click to delete a scanner.
5 Make default: Click to select the scanner to be used when multiple scanners are set. The
scanner selected here can be operated from a TWAIN-compatible application.
Operating TWAIN for Mac
The methods of using a TWAIN-compatible application to capture an image from the scanner are
roughly classified into two types. Perform scanning according to the situation of operation.
For starting operation from the scanner
1
Set the TWAIN mode on the scanner and set the original. For details, refer to the operation guide for
the scanner.
2
Start TWAIN for Mac from a TWAIN-compatible application.
3
Refer to Main dialog on page 8 to perform the setting for scanning.
4
Click the [Start] button. Scanning starts and the image data is sent to the Macintosh computer.
1
2
3
4
5
TWAIN for Mac
8
For starting operation from the Macintosh computer
1
Start TWAIN for Mac from a TWAIN-compatible application.
2
Perform the setting for scanning referring to Main dialog described below.
3
Check [Wait for user interaction at scanner] and click the [Start] button.
4
Set the TWAIN mode on the scanner and set the original. For details, refer to the Set up Edition of
the Operation Guide for the scanner.
5
Press the [Start] key on the scanner. Scanning starts and the image data is sent to the Macintosh
computer.
Main dialog
This section explains the main dialog for TWAIN for Mac.
1Size: Select the original size for scanning here.
2 Resolution: Select the resolution for scanning the original here.
3Quality: Select the image quality according to the original here. This item can be set only if
[Black and White] has been selected at [Mode].
4Mode (color scanner only): Select [Color] or [Black and White] as the color mode here.
5 Brightness: Select the density for scanning the original here.
6Orientation: Set the orientation of the original to be scanned here.
7Preferences: Set the method of scanning and use of a two-sided original here.
8Status: Displays the status of the scanner.
9Start button: Click to start scanning.
10 Help: Click to display the help screen.
11 Defaults: Click to return all the settings in the main dialog to their default values.
12 Close: Click to close the main dialog.
1
2
3
4
5
6
7
8
11
10
9
12
9
Appendix
System requirements
Scan to Mac
Space for storing image data is additionally needed.
TWAIN for Mac
Space for storing image data is additionally needed.
Mac OS Mac OS 9.1 - 9.2.2 Mac OS 10.1 or later
CPU PowerPC G3 or upper
RAM 64 MB or more 128 MB or more
Available space of hard disk 20 MB or more
CD-ROM drive 1 drive
Network connection port
100BASE-TX or 10BASE-T, 1 port
Mac OS Mac OS 10.1 or later
CPU PowerPC G3 or upper
RAM 128 MB or more
Available space of hard disk 20 MB or more
CD-ROM drive 1 drive
Network connection port 100BASE-TX or 10BASE-T, 1 port
Appendix
10
MEMO
MEMO
Revision 1.0 2005.1
©2005 KYOCERA MITA Corporation All rights reserved.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19

KYOCERA CS-8030 Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI