SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted By Date
30G 99042720B
BLOWER / ROUGH-IN KITS
& DUCTING ACCESSORIES
Best by Broan, P.O Box 140, Hartford, Wisconsin 53027
For use with
Best by Broan
K210A Series
Range Hoods
Model P8 Blower Rough-in Kit
•
850 cfm, 120 VAC, 3.4
Amps
•
Interior-mounted, single-
wheel design
•
Attaches to rough-in plate
independent of hood
•
Includes rough-in kit, with
flow-deviator and damper
adaptor
•
Uses 3¼” x 10” rectangular
or 8” round duct
Model P5 Blower Rough-in Kit
•
500 cfm, 120 VAC, 1.8
Amps
•
Interior-mounted, single-
wheel design
•
Attaches to rough-in plate
independent of hood
•
Includes rough-in kit, with
flow-deviator and damper
adaptor
•
Uses 3¼” x 10” rectangular
or 8” round duct
Models EB6 & EB9
Exterior Blowers
•
600/900 cfm, 120 VAC, 2.3/
5.8 Amps
•
Exterior-mounted, all
aluminum construction
•
Exterior Blower Rough-in
Kit included
•
Use with 10” round duct
(purchase separately)
DIA
Models EB12 & EB15
Exterior Blowers
•
1200/1500 cfm, 120 VAC,
3.0/3.8 Amps
•
Brushed aluminum con-
struction
•
Built-in flashing plate for
roof or wall mount
•
Built-in backdraft damper
and birdscreen
•
Easily removable cover
provides quick access to
blower for cleaning and
servicing
•
For 10" round duct
•
Thermally protected,
permanently lubricated,
ball-bearing motor
•
Speed control compatible
motor
•
Dynamically balanced 14”
(EB12)
14
3
/
8
” (EB15) diameter
backward-curved impeller
•
Low RPM - quiet operation
DIA
10
1
2
23
1
2
1"
HIGH
DUCT COLLAR
3
4
Exterior Blower Rough-in Kit
•
Included with Models EB6,
EB9, EB12, & EB15 Exterior
Blowers
13
Model 418
10” Round
Adjustable Elbow
Model 412 - 3¼” x 10” to 7”
Round Adjustable Elbow
Model 413 - 3¼” x 10” to 8”
Round Adjustable Elbow
Blower / Rough-in Kits
& Ducting Accessories
for K210A Series
Page 2 of 4
PERFORMANCE RATINGS
Blowers for use with Best by Broan K210A Series Range Hood System
P5
(Horizontal)
0.00
0.20
0.40
0.60
0.80
1.00
1.20
0 100 200 300 400 500 600
Air FlowRate (cfm)
Static Pressure (in-wg)
P5
(Vertical)
0.00
0.20
0.40
0.60
0.80
1.00
1.20
0 50 100 150 200 250 300 350 400 450 500
Air FlowRate (cfm)
Static Pressure (in-wg)
P8
(Horizontal)
0.00
0.20
0.40
0.60
0.80
1.00
1.20
1.40
0 100 200 300 400 500 600 700 800 900 1000
Air FlowRate (cfm)
Static Pressure (in-wg)
P8
(Vertical)
0.00
0.20
0.40
0.60
0.80
1.00
1.20
1.40
0 100 200 300 400 500 600 700 800 900 1000
Air FlowRate (cfm)
Static Pressure (in-wg)
EB6
0.00
0.10
0.20
0.30
0.40
0.50
0.60
0.70
0.80
0.90
0 100 200 300 400 500 600 700
AirFlowRate(cfm)
Static Pressure(in-wg)
EB9
0.00
0.20
0.40
0.60
0.80
1.00
1.20
0 100 200 300 400 500 600 700 800 900 1000
AirFlowRate(cfm)
Static Pressure(in-wg)
HVI-2100 CERTIFIED RATINGS comply with new testing
technologies and procedures prescribed by the Home
Ventilating Institute, for off-the-shelf products, as they are
available to consumers. Product performance is rated at 0.1 in.
static pressure, based on tests conducted in AMCA’s state-of-
the-art test laboratory. Sones are a measure of humanly-
perceived loudness, based on laboratory measurements.
Blower / Rough-in Kits
& Ducting Accessories
for K210A Series
Page 3 of 4
PERFORMANCE RATINGS
Blowers for use with Best by Broan K210A Series Range Hood System
EB12
0.00
0.20
0.40
0.60
0.80
1.00
1.20
1.40
1.60
1.80
2.00
0 200 400 600 800 1000 1200 1400
AirFlowRate(cfm)
Static Pressure(in-wg)
EB15
0.00
0.50
1.00
1.50
2.00
2.50
0 200 400 600 800 1000 1200 1400 1600 1800
AirFlowRate(cfm)
Static Pressure(in-wg)
HVI-2100 CERTIFIED RATINGS comply with new testing
technologies and procedures prescribed by the Home
Ventilating Institute, for off-the-shelf products, as they are
available to consumers. Product performance is rated at 0.1 in.
static pressure, based on tests conducted in AMCA’s state-of-
the-art test laboratory. Sones are a measure of humanly-
perceived loudness, based on laboratory measurements.
Blower / Rough-in Kits
& Ducting Accessories
for K210A Series
Page 4 of 4
BLOWER DUCTING POSITIONS
Blowers for use with Best by Broan K210A Series Range Hood System
5 1/8"
7"
5 1/8"
7"
5 1/8"
7"
10 1/2"
∅
7"
9 1/16"
∅
9 5/8"
8 7/8"
18 1/2"
18 1/2"
4 1/2"
4 1/2"
1 1/4"
6 1/2"
8 3/4"
8 3/4"
5 11/16"
6 1/2"
∅
9 5/8"
8 3/4"
4 1/4"
6 1/2"
∅
7
Model P6
Horizontal Outlet
- Back View-
Model P6
Vertical Outlet
- Top View-
Model P12
Horizontal Outlet
- Back View-
Model P12
Vertical Outlet
- Top View-
Model EB6
Horizontal Outlet
- Back View-
Model EB9
Vertical Outlet
- Top View-
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Best PK22 User manual
-
-
-
-
-
Best L3348D Installation guide
-
BEST Range Hoods PIK33 User manual
-
-
-
