Vello LHS-77II User manual

Brand: Vello

Model: LHS-77II

Type: User manual

This manual is also suitable for

Vello LHS-77II is a snap-on lens hood designed to prevent unwanted stray light from entering your camera lens.

Key features and benefits:

Petal shape maximizes hood coverage while minimizing weight and hood area
Extra protection from accidental impact
Reversible design allows for compact storage
Quality matte inside finish eliminates interior reflected light
Durable & impact-resistant plastic housing

Ideal for:

Internal focus lenses
Full frame cameras with an attached lens above 20mm
APS-C cameras with an attached lens above 15mm

Usage:

To install the lens hood, hold it with the "petals" facing away from the camera and ensure the word "TOP" is facing upward on the hood. Align the top of the lens hood with the top of the camera lens and squeeze the side tabs in to gently snap it into place on the filter thread.

Vello LHS-77II is a snap-on lens hood designed to prevent unwanted stray light from entering your camera lens.

Key features and benefits:

Petal shape maximizes hood coverage while minimizing weight and hood area
Extra protection from accidental impact
Reversible design allows for compact storage
Quality matte inside finish eliminates interior reflected light
Durable & impact-resistant plastic housing

Ideal for:

Internal focus lenses
Full frame cameras with an attached lens above 20mm
APS-C cameras with an attached lens above 15mm

Usage:

SNAP-ON

LENS HOOD

USER MANUAL

VERSION II

INTRODUCTION

Thank you for choosing a Vello Snap-on Lens Hood. The Vello

Snap-on Lens Hood is primarily designed to prevent unwanted

stray light from entering your camera lens by extending and

shading the end of the lens.

Additional features allow the hood to be easily mounted in the

forward and reverse positions, and accept lens-compatible caps.

Please follow the instructions contained within this manual to

install and remove your Vello Snap-on Lens Hood properly.

Benets of Vello

Snap-on Lens Hood:

• Petal Shape Maximizes

Hood Coverage

• Minimum Weight

& Hood Area

• Extra Protection From

Accidental Impact

• Reversible Design Allows

For Compact Storage

• Quality Matte Inside Finish

Eliminates interior reected light

• Durable & Impact-Resistant

Plastic Housing

Note: This device is ideal for internal focus lenses;

full frame cameras with an attached lens above

20mm; and APS-C cameras with an attached

lens above 15mm. Usage of this device with a

lens below the allowance may cause vignetting.

(Note: Improper installation of lens hood may cause vignetting – verify that the word “TOP” is facing

upward on hood and the longer “petals” are oriented in top and bottom positions)

TO INSTALL ON LENS

Hold tulip-shaped lens hood with

“petals” facing away from camera

and ensure the word “TOP” is

facing upward on hood

Align top of lens hood with top of

camera lens; squeeze side tabs in

and gently snap into place on lter

thread

(Note: Do not grip device by hood itself – always keep rm hold on

actual camera and/or lens to prevent accidental breakage)

To detach lens hood, grasp base

of hood and squeeze side tabs in;

remove base from lter thread by

pulling outward

TO REMOVE FROM LENS

TO REVERSE LENS HOOD

To reverse lens hood for storage

purposes, simply rotate hood with

“petals” facing toward camera and

gently snap into place on lter thread

(Note: Squeeze-lock tabs on lens cap must be

aligned with thread adapter strips on sides of

hood to be properly secured)

LENS CAP PLACEMENT

To install lens cap on top of lens

hood, snap lens-compatible cap

into thread adapter strips on sides

of hood; cap can be accepted by

hood in both forward and reverse

positions

• To maximize usage of the Vello

Snap-On Lens Hood, please

note the following:

• When installing lens hood

device, be sure to hold camera

and/or lens rmly; for maximum

protection, install hood on at

surface to prevent accidental

breakage

• While the lens hood will

accept camera-compatible

lens cap to help protect from

dust, the hood will not create

airtight seal with cap

• Always remove the lens

cap from lens hood before

removing actual lens hood

device from camera

ADDITIONAL NOTES

Limited One-Year Warranty

Vello provides a limited warranty that this product is free from defects in materials

and workmanship to the original purchaser under normal use for a period of

one (1) year from the original purchase date. Vello's responsibility with respect

to this limited warranty shall be limited solely to repair or replacement, at its

option, of any product which fails during normal consumer use. This warranty

does not extend to damage or failure which results from misuse, neglect,

accident, alteration, abuse, improper installation or maintenance. EXCEPT AS

PROVIDED HEREIN, VELLO MAKES NEITHER ANY EXPRESS WARRANTIES

NOR ANY IMPLIED WARRANTIES. INCLUDING BUT NOT LIMITED TO

ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR

A PARTICULAR PURPOSE. To obtain a replacement during the time of this

warranty please return the defective Item with proof of purchase along with

an RMA number to the place of purchase. This warranty gives you specic

legal rights, and you may also have other rights which vary from state to state.

Gradus Group

Vello LHS-77II User manual

Brand: Vello

Model: LHS-77II

Type: User manual

This manual is also suitable for

Vello LHS-77II is a snap-on lens hood designed to prevent unwanted stray light from entering your camera lens.

Key features and benefits:

Petal shape maximizes hood coverage while minimizing weight and hood area
Extra protection from accidental impact
Reversible design allows for compact storage
Quality matte inside finish eliminates interior reflected light
Durable & impact-resistant plastic housing

Vello LHS-77II User manual

This manual is also suitable for

Vello LHS-77II User manual

Related papers

Other documents