Pelco C2479M-A is a dry nitrogen charging kit used to pressurize Pelco EH8100 Series enclosures and Pressurized Spectra III Series domes with approximately 8 psi of dry nitrogen. It features a fixed, non-adjustable output pressure of 12 psi, a gauge that reads tank pressure, and a non-rechargeable tank. The kit includes a T-handle, pressure relief valve, and Schraeder valve. To use, open the tank valve, position the enclosure with the window pointing up (for EH8100 Series Enclosure only), remove the valve cap from the Schraeder valve, and attach the air chuck.
Pelco C2479M-A is a dry nitrogen charging kit used to pressurize Pelco EH8100 Series enclosures and Pressurized Spectra III Series domes with approximately 8 psi of dry nitrogen. It features a fixed, non-adjustable output pressure of 12 psi, a gauge that reads tank pressure, and a non-rechargeable tank. The kit includes a T-handle, pressure relief valve, and Schraeder valve. To use, open the tank valve, position the enclosure with the window pointing up (for EH8100 Series Enclosure only), remove the valve cap from the Schraeder valve, and attach the air chuck.
Pelco C2479M-A is a dry nitrogen charging kit used to pressurize Pelco EH8100 Series enclosures and Pressurized Spectra III Series domes with approximately 8 psi of dry nitrogen. It features a fixed, non-adjustable output pressure of 12 psi, a gauge that reads tank pressure, and a non-rechargeable tank. The kit includes a T-handle, pressure relief valve, and Schraeder valve. To use, open the tank valve, position the enclosure with the window pointing up (for EH8100 Series Enclosure only), remove the valve cap from the Schraeder valve, and attach the air chuck.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI