Contec ATP-16E Owner's manual

Brand: Contec

Model: ATP-16E

Type: Owner's manual

1 ATP-16E

Termination Panel with BNC connectors

for Analog I/O Boards

ATP-16E User’s Manual

CONTEC CO.,LTD.

Thank you for purchasing the CONTEC product.

The product consists of the items listed below. Check, with the following list, that your package is

complete. If you discover damaged or missing items, contact your retailer.

Product Configuration List

- ATP-

16E

Termination Panel …1

- User’s Manual …1

Safety Precautions

Understand the following definitions and precautions to use the product safely.

Handling Precautions

CAUTION

- Use it in a regulated system requirements (temperature and humidity).

- Do not use or store the product in a location exposed to extremely high or low temperature or

susceptible to rapid temperature changes.

Example: - Exposure to direct sun

- In the vicinity of a heat source

- Clean the ATP-

16E

by wiping lightly with a soft cloth moistened with water or a cleaning solution.

Take care to avoid the use of benzene, thinners or other volatile solutions which may cause

deformation or discoloration.

- CONTEC will bear no responsibility for any problems, etc., resulting from modifying this product.

- When carrying the product, be careful not to apply direct vibration or shock to the board.

- The information in this document is subject to change without notice.

- All relevant issues have been considered in the preparation of this document. Should you notice

an omission or any questionable item in this document, please feel free to notify CONTEC CO.,

LTD.

- Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever

(including damages for loss of business profits) arising out of the use or inability to use this

CONTEC product or the information contained herein.

- Other product and product names are trademarks of their respective holder.

User's Manual

ATP-16E

User's Manual

AI00AI01

CN1

AI04

AI05

AI08AI09

AI03

AI07

AI06

AI02

AI10

AI11

AO00

AI12

AI13

AI14

AI15

ATP-16E User’s Manual

ATP-16E 2

About the Termination Panel

This product is the termination panel with BNC connectors for CONTEC’s analog I/O board

This terminal box eases your connection of external devices and signals.

Supporting boards are as follows.

Board for PCI :

AD12-16(PCI)EV, AD16-16(PCI)EV, AD12-16U(PCI)EV, AD16-16U(PCI)EV,

AD12-16(PCI)E, AD16-16(PCI)E, AD12-16U(PCI)EH, AD16-16U(PCI)EH, ADI12-16(PCI)

Board for ISA :

AD12-16(PC)EH, AD16-16(PC)EH, AD12-16U(PC)EH, AD16-16U(PC)EH

Features

Compact designing

With its compact designing, you can place this BNC connector terminal box at your personal computer.

By removing the connection cable, you can carry this box with your easily.

Lightly designing by Aluminum

It is lightly designed by using aluminum in consideration of portable.

Easy to connect external signals

Allow you to connect analog signal through a BNC cable.

ATP-16E User’s Manual

3 ATP-16E

Connect a Board

Terminal Pin and the Corresponding Board Connector

Pin Assignment

Table 1 Terminal Pin and the Related Board Connector Pin Assignment

Signal name on ATP-16E Description Signal name on Boards

AI00 - AI15 BNC connectors for analog inputs Analog Input00 - Analog Input15

AO00 BNC connectors for analog outputs Analog Output00

AGND Ground for all the analog signals Analog Ground

N.C. Not Connected

Not Connected

Analog E Series*1 :

Sixteen channels of analog input signals, one channel of analog output signal, seventeen channels of

analog ground can be connected through ATP-16E terminal box.

*1 Board for PCI :

AD12-16(PCI)EV, AD16-16(PCI)EV, AD12-16U(PCI)EV, AD16-16U(PCI)EV,

AD12-16(PCI)E, AD16-16(PCI)E, AD12-16U(PCI)EH, AD16-16U(PCI)EH

Board for ISA :

AD12-16(PC)EH, AD16-16(PC)EH, AD12-16U(PC)EH, AD16-16U(PC)EH

ADI12-16(PCI) :

Sixteen channels of analog input signals, sixteen channels of analog ground can be connected through

ATP-16E terminal box.

Pin Assignment of Connector

Not Connected

Analog Output

Analog Input 15

Analog Input 7

Analog Input 14

Analog Input 6

Analog Input 13

Analog Input 5

Analog Input 12

Analog Input 4

Analog Input 11

Analog Input 3

Analog Input 10

Analog Input 2

Analog Input 9

Analog Input 1

Analog Input 8

Analog Input 0

Not Connected

Analog Ground

Figure 1 Pin Assignment of Connector CN1

ATP-16E User’s Manual

ATP-16E 4

Application with an Board

Use the CONTEC option cable (PCB37PS-**P) to connect to CN1.

CAUTION

We suggest you to use a PCB

PS-0.5m option cable to connect the board and terminal box.

Connect External Signals

ou use BNC connectors to

connect analog input and output

signals.

BNC Connectors

ATP-16E User’s Manual

5 ATP-16E

Connection Drawing

Connect to an analog I/O board*1 : (Ex. : AD12-16(PCI)EV)

Analog Input00 - 15

AD12-16(PCI)E

Analog Output00

Analog Ground

Not Connected

AI00 - 15

ATP-16E

AO00

AGND

N.C.

Figure 2 Connection Drawing

*1: Board for PCI :

AD12-16(PCI)EV, AD16-16(PCI)EV, AD12-16U(PCI)EV, AD16-16U(PCI)EV,

AD12-16(PCI)E, AD16-16(PCI)E, AD12-16U(PCI)EH, AD16-16U(PCI)EH, ADI12-16(PCI)

Board for ISA :

AD12-16(PC)EH, AD16-16(PC)EH, AD12-16U(PC)EH, AD16-16U(PC)EH

External dimensions

(2.2)

AI00AI01

AI04

AI05

AI08AI09

AI03

AI07

AI06

AI02

AI10

AI11

AO00

AI12

AI13

AI14

AI15

(5.4)

120

CN1

[mm]

Figure 3 Dimensions

ATP-16E User’s Manual

CONTEC CO., LTD. September 2005 Edition

3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan

Japanese http://www.contec.co.jp/

English http://www.contec.com/ A-51-072 (LYFD181)

Chinese http://www.contec.com.cn/ [09202005]

No part of this document may be copied or reproduced in any form by any means without prior written

consent of CONTEC CO., LTD.

Specifications

Table 2 Specification

Items Specification

Analog Input 16ch (BNC connector, AI00 - AI15)

Analog Output 1ch (BNC connector, AO00)

Operating Conditions 0 - 50ºC, 10 - 90%RH (no condensation)

Dimensions (mm) 120(W) x 88(H) x 35(D)

(Not include the height of screw terminal block and rubber feet)

Weight 250g

Supported Products For PCI :

AD12-16(PCI)EV, AD16-16(PCI)EV, AD12-16U(PCI)EV,

AD16-16U(PCI)EV, AD12-16(PCI)E, AD16-16(PCI)E,

AD12-16U(PCI)EH, AD16-16U(PCI)EH, ADI12-16(PCI)

For ISA :

AD12-16(PC)EH, AD16-16(PC)EH, AD12-16U(PC)EH,

AD16-16U(PC)EH

Table 3 Specification of Interface Connector CN1

Type of Connector DCLC-J37SAF-20L9 [mfd. by JAE, Female] equivalent

Thumb screw: UNC#4-40(inch screw)

Type of mating connector

17JE-23370-02(D8C) [mfd. by DDK, Male] equivalent

FDCD-37P [mdf. by HIROSE, Male] equivalent

DC-37P-N [mfd. by JAE, Male] equivalent

Connecting Cable (option) PCB37PS-0.5P, PCB37PS-1.5P

Contec ATP-16E Owner's manual

Contec ATP-16E Owner's manual

Contec ATP-16E Owner's manual

Related papers

Other documents