Tripp Lite HGOUTLETCVR Owner's manual

Tripp Lite has a policy of continuous improvement. Product specifications are subject to change without notice.

This cover is intended for use with HG power strips to prevent the connection of

unauthorized devices.

Installation/Removal

Insert the cover into the outlet you wish

to block.

Using finger pressure, push the nylon

screw into the hole in the ground

opening. This will lock the cover into

place.

To remove the cover, use a Phillips

screwdriver to remove the nylon screw

and then pull the cover out of the

outlet.

Save the cover and screw as it is designed

for repeated use.

Instruction Sheet

HGOUTLETCVR

12-406 • 93-323F

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

12-406-93-323F.indd 1 9/18/2012 11:27:13 AM

This manual is also suitable for