Copystar KM-8030 Operating instructions

Page is loading ...

PF-660 OPERATION GUIDE 1

1English

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Part Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Loading Paper in the Side Feeder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Paper Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2 Deutsch

Sicherheitshinweise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Bezeichnung der Teile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Papier einlegen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Einlegen von Papier in die Seitenzufuhr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Störungsbeseitigung. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Papierstaus beseitigen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Technische Daten. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

3 Español

Información de seguridad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Nombre de las piezas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Carga de papel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Colocación de papel en la plataforma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Solución de problemas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Cómo solucionar los atascos de papel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Especificaciones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

4 Français

Informations de sécurité. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Nom des pièces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Chargement du papier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Chargement du papier dans le magasin optionnel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Dépannage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Élimination des bourrages papier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Spécifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

5Italiano

Informazioni sulla sicurezza . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Nomi delle parti . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Caricamento della carta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Caricamento della carta nell’alimentatore laterale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Problemi e soluzioni . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

Eliminazione degli inceppamenti carta. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Specifiche. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Page is loading ...

PF-660 OPERATION GUIDE 3

1English

Safety Information

ALWAYS read this Operation Guide thoroughly before use. After reading, keep it together

with the Operation Guide for the machine to install this Finisher (hereinafter, the machine).

Refer to the Operation Guide for the machine for information on the service representative

for your product.

The sections of this Operation Guide and parts of this product marked with symbols are

safety warnings. These are designed to protect the user, other individuals and surrounding

objects, and ensure correct and safe usage of the product.

Symbols

The symbol indicates that the related section includes safety warnings. Specific points

of attention are indicated inside the symbol.

The symbol indicates that the related section includes information on prohibited actions.

Specifics of the prohibited action are indicated inside the symbol.

DANGER: Indicates that serious injury or even death will very possibly result

from insufficient attention to or incorrect compliance with the related points.

WARNING: Indicates that serious injury or even death may result from

insufficient attention to or incorrect compliance with the related points.

CAUTION: Indicates that personal injury or mechanical damage may result

from insufficient attention to or incorrect compliance with the related points.

.... [General warning]

....

[Warning of prohibited action]

....

[Disassembly prohibited]

English

4 PF-660 OPERATION GUIDE

The

z symbol indicates that the related section includes information on actions which must

be performed. Specifics of the required action are indicated inside the symbol.

Please contact your service representative to order a replacement if the safety warnings in

this Operation Guide are illegible or if the guide itself is missing (fee required).

....

[Alert of required action]

....

[Remove the power plug from the outlet]

....

[Always connect the machine to an outlet with a ground connection]

English

PF-660 OPERATION GUIDE 5

INSTALLATION PRECAUTIONS

Environment

CAUTION

Avoid placing this product on or in locations which are unstable or not level. Such

locations may cause the product to fall down or fall over. This type of situation

presents a danger of personal injury or damage to the product.

Avoid locations near radiators, heaters, or other heat sources, or locations near

flammable items, to avoid the danger of fire.

Other precautions

Depending upon the location in which this product is installed, adverse environmental

conditions may affect its performance. Ensure this product is installed in an air-conditioned

room (recommended room temperature: around 73.4°F (23°C), humidity: around 50%) and

avoid the following locations when selecting a site for installation:

• bright locations near a window or with exposure to direct sunlight

• locations with vibrations

• locations with drastic fluctuations in temperature or humidity

• locations with direct exposure to hot or cold air

Handling of plastic bags

WARNING

Keep the plastic bags that are used with this product away from children. The plastic

may cling to their nose and mouth causing suffocation.

PRECAUTIONS FOR USE

Cautions when using this product

WARNING

DO NOT place metallic objects or containers with water (flower vases, flower pots,

cups, etc.) on or near this product. This type of situation presents a danger of fire or

electrical shock should any water fall inside.

DO NOT damage, break or attempt to repair the signal line. DO NOT place heavy

objects on the signal line, pull it, bend it unnecessarily or cause any other type of

damage. These types of situations present a danger of fire or electrical shock.

NEVER attempt to repair or disassemble this product or its parts as there is a danger

of injury or fire.

English

6 PF-660 OPERATION GUIDE

If this product becomes excessively hot, smoke appears, there is an odd smell, or

any other abnormal situation occurs, there is a danger of fire or electrical shock.

Immediately turn OFF (O) the machine’s main power switch, remove the machine’s

power plug from its outlet and contact your service representative.

If anything harmful (paper clips, water, other fluids, etc.) falls into this product, turn

OFF (O) the machine’s main power switch immediately, remove the machine’s

power plug from its outlet and contact your service representative. If you continue to

use this product without taking these steps, there is a danger of fire or electrical

shock.

ALWAYS contact your service representative for maintenance or repair of internal

parts.

CAUTION

For safety purposes, ALWAYS turn OFF (O) the machine’s main power switch and

remove the machine’s power plug from its outlet when performing cleaning

operations on this product.

If dust accumulates within this product, there is a danger of fire or other problems. It

is therefore recommended that you consult with your service representative in

regard to cleaning of internal parts. This is particularly effective if performed prior to

seasons of high humidity. Consult with your service representative in regard to the

cost of cleaning the internal parts of the product.

Other Precautions

DO NOT place heavy objects on this product or cause other damage to the product.

When lifting or moving the product, contact your service representative.

Do not touch electrical parts, such as connectors or printed circuit boards. They could be

damaged by static electricity.

DO NOT attempt to perform any operations not explained in this Operation Guide.

English

PF-660 OPERATION GUIDE 7

DECLARATION OF CONFORMITY

TO

89/336/EEC, 73/23/EEC and 93/68/EEC

We declare under our sole responsibility that the product to which

this declaration relates is in conformity with the following specifications.

Limits and methods of measurement for immunity

characteristics of information technology equipment EN55024

Limits and methods of measurement for radio

interference characteristics of information technology

equipment EN55022 Class B

Limits for harmonic currents emissions

for equipment input current 16A per phase

EN61000-3-2

Limitation of voltage fluctuations and flicker in

low-voltage supply systems for equipment with rated

current 16A

EN61000-3-3

Safety of information technology equipment,

including electrical equipment EN60950

WARNING

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION — The changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

* The above warning is valid only in the United States of America.

English

8 PF-660 OPERATION GUIDE

Part Names

1 Release Lever

2 The top cover

3 Loading Paper indicator

4 The switch for the paper lifter

5 The detect switch

1

2

4

5

3

English

PF-660 OPERATION GUIDE 9

Loading Paper

For details on the types of paper supported, refer to Paper in the Appendix of the Advanced

Operation Guide.

Before Loading Paper

When you open a new package of paper, follow the instructions as below to fan through

the paper prior to loading.

1 Holding the paper on both sides,

bend the edges downward so that

the middle curves upward.

2 Holding your thumbs in place

toward the center, unbend the

paper so that the bottom sheet is

back at its original position.Your

thumbs should prevent the stack

from straightening out, forming a

hill-like shape.

3 Fluff the paper, raising one hand

and lowering the other, then

alternating. The individual sheets are slightly lifted, separated from each other.

4 Align the sheets by tapping the stack on a flat surface.

If the paper is curled or folded, straighten it before loading. Paper that is curled or folded

may cause paper jams.

IMPORTANT: If you copy onto used paper (paper already used for copying), do not use

paper that is stapled or clipped together. This may damage the copier or cause poor image

quality.

If ejected copies are not flat or are stacked

unevenly, turn the paper in the side feeder over

and reload it.

Avoid exposing opened paper to high

temperatures and high humidity as dampness

may cause copying problems. Seal any remaining

paper after loading the side feeder in its original

package. If the copier will not be used for a

prolonged period, protect all paper from humidity

by removing from the side feeder and sealing in

the original package.

English

10 PF-660 OPERATION GUIDE

Loading Paper in the Side Feeder

The side feeder has a capacity of 4000 sheets standard paper(80g/m

2

). The following

paper sizes can be used in side feeder.

Inch models: 11 × 17", 8

1/2 ×14", 81/2 × 11", 11 × 8 1/2"

Metric models: A3, A4, A4R

NOTE: After loading paper, be sure to specify the type of the paper loaded in the side

feeder on the operation panel. The available options are plain, recycled, colored paper

and thick paper.

For details, refer to the Operataion Guide for the machine.

Consult your Dealer or Service Representative for changing the paper sizes.

1

Open the top cover.

2

Align the paper flush against the left side in the

back of the feeder as you load it.

NOTE: Before loading the paper, be sure

that it is not curled or folded. Paper that is

curled or folded may cause paper jams.

Load the paper with the side to be copied

face-up.

NOTE: The side feeder detects the paper when

the paper touches the detect switch. The paper

lifter descends for approximately 500 sheets after

three seconds.

Paper can be added after the paper lifter is

stopped.

Do not touch the paper lifter when it is running.

English

PF-660 OPERATION GUIDE 11

While the paper lifter has lighted in green, it is

available to descend the paper lifter manually.

IMPORTANT: If the paper exceeds the indicated

level (1) when the paper lifter is at the bottom, the

loading paper indicator lights in red and the error

message is displayed.

Ensure that the paper does not exceed the

indicated level (1).

For details of the error messages, refer to

Responding to Error Messages on page 12.

3

Close the top cover softly.

Loading Paper indicator

The details of the loading paper indicator are as follows.

1

Display Condition Description

Lights in green

color

It is available to load the paper.

Blinks in

green color

The paper lifter is descended at the bottom.

It is available to load the paper until the level

indicated.

Lights in red

color

It is unavailable to load the paper.

Ensure that the loaded paper does not exceed the

indicated level.

English

12 PF-660 OPERATION GUIDE

Troubleshooting

Solving Malfunctions

The table below provides general guidelines for problem solving.

If a problem occurs with your copier, check the checkpoints and perform procedures

indicated on the following pages. If the problem persists, contact your Service

Representative.

Responding to Error Messages

If the touch panel displays any of these messages, follow the corresponding procedure.

Symptom Checkpoints Corrective Actions

Reference

Page

The paper often

jams.

Is the paper loaded properly? Load the paper properly. page 10

Is the paper of the supported type?

Is it in good condition?

Remove the paper, turn it over, and

reload it.

page 9

Is the paper curled, folded, or

wrinkled?

Replace the paper with new paper. page 10

Are there any loose scraps or

jammed paper in the side feeder?

Remove any jammed paper. page 13

Error Messages Checkpoints Corrective Actions

Reference

Page

Reset Side Paper Deck.

(Reset side feeder.)

Is the side feeder installed

correctly on the copier?

Install the side feeder securely

to the copier.

—

Add paper in drawer 5.

(Add paper cassette 5.)

Is the indicated cassette out of

paper?

Load paper. page 10

Check the side feeder.

Paper capacity exceeded.

Reload paper in the side

feeder.

Is the maximum storage

capacity of the side feeder

exceeded?

Remove paper from the side

feeder so that it becomes less

than the maximum capacity.

page 10

Paper misfeed.

Remove paper.

— If a paper jam occurs, the

location of the jam is indicated

on the touch panel and the

copier stops.

Leave the copier on (| position)

and follow the instruction to

remove the jammed paper.

page 13

Side Paper Deck is out of

order. Select another paper

drawer.

(Side feeder is out of order.

Select another paper

cassette.)

— The side feeder has

malfunctions and is temporarily

unavailable. Contact your

Service Representative or

Authorized Service Center

promptly. To continue copying,

use the other cassette.

—

English

PF-660 OPERATION GUIDE 13

Paper Jams

If the paper is jamed in the side

feeder, Paper missfeed is displayed

on the touch panel and the copier

stops. Refer to these procedures to

remove the jammed paper.

Precautions of the Pepaer Jam

• The suspended copy job is cleared when the power key is pressed to be off or the

main power switch is turned off.

• Leave the main power switched ON (|) while clearing paper jams.

• Do not reuse jammed paper.

• If the paper tears during removal, be sure to remove any loose scraps of paper from

the copier. Scraps of paper left in the copier could cause subsequent jamming.

1

Press the release lever of the side feeder to

detach the side feeder from the copier.

2

Remove the paper jammed in the connecting slot

of the side feeder.

If the paper tears, remove any loose scraps from

the copier.

Paper misfeed.

2.Reset Side Paper Deck to Mainframe.

Side Paper Deck.

1.Remove paper from between Copier a

English

14 PF-660 OPERATION GUIDE

3

Attach the side feeder to the copier by returning it

to the original position.

NOTE: When Paper misfeed is displayed on

the touch panel, follow the steps below.

4

Open the top cover of the side feeder.

5

Remove the jammed paper.

If the paper tears, remove any loose scraps from

the copier.

6

Close the top cover of the side feeder softly.

English

PF-660 OPERATION GUIDE 15

Specifications

Paper Size Inch models: 11 × 17", 8 1/2 ×14", 81/2 ×11", 11×81/2"

Metric models: A3, A4, A4R

Supported Paper

Weight: 60 ~ 200 g/m

2

Paper Types: Plain, recycled, colored paper, and thick paper.

Dimensions

(W) × (D) × (H)

670 mm × 580 mm × 705 mm

26

3/8" × 22 13/16" × 27 3/4"

Weight Approx. 45 kg/Approx. 99.21 lbs.

Page is loading ...

Español

PF-660 GUÍA DE USO 35

DECLARACIÓN DE CONFORMIDAD

CON

89/336/EEC, 73/23/EEC y 93/68/EEC

Declaramos, bajo nuestra responsabilidad, que el producto al que

hace referencia esta declaración cumple las siguientes especificaciones.

Límites y métodos de medida de las características de

inmunidad del equipo de tecnología de la información EN55024

Límites y métodos de medida de las características de

radiointerferencias del equipo de tecnología de la

información EN55022 Class B

Límites de emisiones de corrientes armónicas

de la corriente de entrada del equipo 16A por fase

EN61000-3-2

Limitación de las fluctuaciones de voltaje y vacilaciones

en los sistemas de suministro de bajo voltaje de equipo

con corriente nominal 16A

EN61000-3-3

Seguridad del equipo de tecnología de la información,

incluido el equipo eléctrico EN60950