Olympus SZ-15 User manual

Category
Print & Scan
Type
User manual
DIGITAL CAMERA
Instruction Manual
SZ-15/DZ-100
Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please
read these instructions carefully to enjoy optimum performance and a longer service life. Keep this
manual in a safe place for future reference.
We recommend that you take test shots to get accustomed to your camera before taking important
photographs.
In the interest of continually improving products, Olympus reserves the right to update or modify
information contained in this manual.
2
EN
Checking the contents of the box
Names of Parts
Names of Parts
4
3
1
2
7
6
5
8
10
9
11
1 Strap eyelet
2
Connector cover
3 HDMI mini connector
4 Multi-connector
5 Microphone
6 Flash
7
Self-timer lamp/AF illuminator
8
Lens
9
Battery/card compartment lock
10
Tripod socket
11
Battery/card cover
or
Digital camera Strap Lithium Ion Battery
(LI-50B)
USB-AC adapter
(F-2AC)
USB cable
(CB-USB7)
OLYMPUS Setup
CD-ROM
Other accessories not shown: Warranty card
Contents may vary depending on purchase location.
3
EN
3
2
8
10
1
5
4
6
7
9
12
11
1
Flash switch
2 Indicator lamp
3
Speaker
4 Zoom lever
5 Shutter button
6 n button
7 Monitor
8 R button (shooting movies)
9 q button (switching between
shooting and playback)
10 Arrow pad
INFO
(changing information display)
# ( ash)
Y (self-timer)/
(erase)
11 A button (OK)
12 button
Attaching the camera strap
Attaching the camera strap
Pull the strap tight so that it does not come
loose.
Arrow pad
H (left)
G (down)
F (up)
I (right)
FGHI instruct to press the up/down/left/right
arrow pad.
4
EN
Inserting and removing the
battery and card (commercially
available)
1
Follow Steps 1 and 2 to open
the battery/card cover.
12
1
Battery/card cover
Battery/card compartment lock
Turn off the camera before opening the battery/
card cover.
2
Insert the battery while sliding the
battery lock knob in the direction
of the arrow.
Battery lock knob
Insert the battery as illustrated with the B mark
toward the battery lock knob.
Damage to the battery exterior (scratches, etc.)
may produce heat or an explosion.
Slide the battery lock knob in the direction of the
arrow to unlock, and then remove the battery.
3
Insert the card straight until it
clicks into place.
Write-protect switch
Always use SD/SDHC/SDXC cards or Eye-Fi
card with this camera. Do not insert other types
of memory cards. “Using the card” (p. 63)
Do not touch the metallic parts of the card directly.
To remove the card
To remove the card
12
Press the card in until it clicks and comes out slightly,
then remove the card.
5
EN
4
Follow Steps 1 and 2 to close
the battery/card cover.
12
1
When using the camera, be sure to close and
lock the battery/card cover.
Charging the battery
Connect the USB cable and USB-AC adapter to the
camera and charge the battery.
For charging the battery abroad, see “Using your
charger and USB-AC adapter abroad” (p. 62).
The battery is not fully charged at shipment. Before
use, be sure to charge the battery until the indicator
lamp turns off (up to 4 hours).
Connecting the camera
Connecting the camera
AC outlet
or
USB cable
(supplied)
Connector cover
Multi-connector
Indicator lamp
On: Charging
Off: Charged
6
EN
When to charge the batteries
When to charge the batteries
Charge the battery when the error message shown
below appears.
Battery Empty
Error message
Flashes in red
Never use any cable other than supplied or
Olympus-designated USB cable. This may cause
smoking or burning.
The included F-2AC USB-AC adapter (hereafter
referred to as USB-AC adapter) differs
depending on the region where you purchased
the camera. If you received a plug-in type USB-
AC adapter, plug it directly into AC outlet.
The included USB-AC adapter has been
designed to be used for charging and playback.
Do not take pictures while the USB-AC adapter
is connected to the camera.
Be sure to unplug the power plug of the USB-AC
adapter from the wall outlet when the charging is
complete or the playback ends.
For details on the battery, see “Battery Handling
Precautions” (p. 71). For details on the USB-AC
adapter, see “USB-AC adapter” (p. 72).
If the indicator lamp does not light, check the USB
cable and USB-AC adapter connections.
The battery can be charged while the camera is
connected to the computer via USB. The charging
time varies depending on the performance of the
computer. (There may be cases in which it takes
approx. 10 hours.)
7
EN
Turning on the camera and
making the initial settings
When you turn on the camera for the rst time, a
screen appears enabling to set the language for the
menus and messages displayed in the monitor, and
the date and time.
To change the selected date and time, see “Setting
the date and time d [X]” (p. 41).
1
Press the n button to turn
on the camera, press FGHI
of the arrow pad to select your
language and press the A button.
2
Press FG of the arrow pad to
select the year for [Y].
X
MENU
Back
Y/M/D
Y M D Time
-- --
--
--
:..2013
Date and time setting
screen
3
Press I of the arrow pad to save
the setting for [Y].
X
MENU
Back
Y/M/D
Y M D Time
-- --
--
--
:..2013
4
As in Steps 2 and 3, press
FGHI of the arrow pad to
set [M] (month), [D] (day), [Time]
(hours and minutes), and [Y/M/D]
(date order), and then press the
A button.
For precise time setting, press the A button as
the time signal strikes 00 seconds.
5
Press HI of the arrow pad to
select time zone and then press
the A button.
Use FG to turn daylight saving time
([Summer]) on or off.
Summer
’13.02.26 12:30
MENU
Back
8
EN
Learning how to use the
camera
Press the n button to turn on the camera and
enter the standby mode. (Press the n button
again to turn off the camera.)
Select the shooting mode, and press the shutter
button to shoot a still image.
To shoot a movie, press the R button.
Set the shooting functions using the function
menu or the setup menu.
To view images, press the q button to switch to
playback mode.
To return to standby mode, press the q button
again, or press the shutter button halfway down
and then release it.
Press and hold the q button while the camera is
turned off to start up the camera in the playback
mode.
In this case, pressing the q button again sets
the camera to the standby mode.
9
EN
Shooting still images
1
Press the n button to turn
on the camera.
2
Select the shooting mode. (p. 13)
3
Hold the camera and compose the
shot.
When holding the camera, take care not to cover
the ash, microphone or other important parts
with your ngers, etc.
Take care so that the ash window is not
exposed to ngerprints or dirt.
4
Press the shutter button halfway
down to focus.
Press
halfway
PP
F3.0F3.01/4001/400
Shutter
speed
AF target mark
Aperture
value
The camera was unable to focus if the AF target
mark ashes red. Try focusing again.
5
To take the picture, gently press
the shutter button all the way
down while being careful not to
shake the camera.
Press halfway Press fully
10
EN
Using the ash
The ash functions can be selected to best match the
shooting conditions.
1
Slide the ash switch to raise the
ash.
To turn off the ash
To turn off the ash
Press the ash down back into the camera.
2
Press I.
PP
Flash Auto
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
MENUMENU
16
M
:34
Using the zoom
Turning the zoom lever adjusts the shooting range.
W side T side
Image size Zoom bar
16M
Optical zoom
Other
*1
*1
Due to increased processing of the pixel
counts, the image quality will not degrade. The
magni cation ratio changes depending on the
image size setting.
11
EN
3
Use HI to select the setting
option, and press the Q button to
set.
Option Description
Flash Auto
The ash res automatically in
low-light or backlight conditions.
Redeye
Pre- ashes are emitted to reduce
the occurrence of red eye in your
photos.
Fill In
The ash res regardless of the
available light.
Flash Off The ash does not re.
Using the self-timer
After the shutter button is pressed all the way down,
the picture is taken after a short delay.
1
Press G.
PP
1212
22
Y
Off
MENUMENU
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
16
M
:34
2
Use HI to select the setting
option, and press the Q button to
set.
Option Description
Y Off
The self-timer is deactivated.
Y 12 sec
The self-timer lamp turns on for
approx. 10 seconds, then blinks
for approx. 2 seconds, and then
the picture is taken.
Y 2 sec
The self-timer lamp blinks for
approx. 2 seconds, and then the
picture is taken.
To cancel the self-timer after it starts
To cancel the self-timer after it starts
Press the button.
12
EN
Shooting screen displays
F3.0F3.01/1001/100
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
16
M
zz
PP
0:00:340:00:34
44
N
ORM
Date
:34
1
2
3
4
5
6
7
8
9
10
141819 1716 1113
20
21
22
232425
1215
When the shutter button is pressed halfway
down
No. Name Normal Detailed No info.
1 Shooting mode
RR
2 Flash
RR
3 Self-timer
RRR
4 Exposure
compensation
RR
5 White balance
RR
6 ISO sensitivity
RR
7 Drive
RR
8 Image size
(still images)
RR
9 Aspect
RR
10 Recording with sound
RR
11 Image size (movies)
RR
12 Movie recording
length
RR
13 Movie recording icon
RR
14 World time
R
15 Image stabilization
R
16 Date stamp
RR
17 Compression
RR
18 Number of storable
still pictures
RR
19 Current memory
RR
20 Battery check
RR
21 AF target mark
RRR
22 Grid Guide
R
23 Aperture value
RRR
24 Shutter speed
RRR
25 Camera shake
warning
RRR
Switching the displays
Switching the displays
The displays change in the order of Normal Detailed No info. each time F (INFO) is pressed.
13
EN
Selecting the shooting mode
The default settings of the function are
highlighted in .
Shooting mode Submode
P (P mode)
M (M mode)
Q
(Q mode)
Recommended/Set 1/Set 2/
Set 3
a
(Super Macro mode)
( mode)
B Portrait
/
F Landscape/
G Night Scene/
M
Night+Portrait/C Sport/
N Indoor/W Candle/
R
Self Portrait/
S
Sunset/
X Fireworks/V Cuisine/
d Documents/
q Beach & Snow/ Pet
P
(P mode)
Pop Art/Pin Hole/Fish Eye/
Soft Focus/Punk/Sparkle/
Watercolor/Re ection/
Miniature/Fragmented/
Dramatic
p
(Panorama mode)
“List of settings available in each shooting mode”
(p. 58), “List of settings” (p. 59), “List of P
settings” (p. 61)
1
Press H of the arrow pad on
standby mode screen rst, and
press HI to select shooting
mode.
To select the Q, and P submodes,
display submodes by using G rst. Then use
HI to select the desired submode and press
the A button.
MENUMENU
16
M
Scene Mode
:34
To select a submode
To select a submode
MENUMENU
Portrait
MENUMENU
16
M
:34
16
M
0:00:340:00:34
44
N
ORM
:34
Icon indicating the submode that is set
14
EN
Learning about the shooting
modes
P (P mode)
The camera will select the appropriate
aperture value and shutter speed for
the subject. Changes can also be made
to various shooting settings, such as
exposure compensation, as needed.
M (M mode)
The camera will automatically select the
optimal shooting mode for the scene.
The shooting condition is decided by
the camera and settings cannot be
changed, excepting some functions.
Q (Q mode)
You can shoot with Beauty Fix effects.
1
Point the camera toward the
subject. Check the frame
appearing around the face
detected by the camera, and then
press the shutter button to take
the picture.
2
To save the image, select [OK] on
the review screen and press the
Q button. To retouch the image
additionally, select [Beauty Fix].
MENU
Back
OK
Beauty Fix
Beauty Fix
Beauty Fix
1 Use FGHI to select a retouching item, and
press the Q button.
MENU
Off
Eye Color Back
2 Check the retouched effects on the review screen,
then press the Q button to start the retouch
process and save.
Settings for Beauty Fix can be registered.
Depending on the picture, the editing may not be
effective.
15
EN
a (Super Macro mode)
This enables shooting as close as 3 cm
(1 in.) to the subject. The zoom position
is locked.
(
mode
)
You can shoot with the best mode
for the subject and shooting scene.
The best shooting settings for various
scenes are pre-programmed as
submodes. Note that functions may be
limited in some modes.
Refer to the descriptions displayed on
the submode selection screen, and
select the desired submode.
P (P mode)
You can shoot with special effects.
Refer to the sample images displayed
on the submode selection screen, and
select the desired submode.
The best shooting settings for each
effect are pre-programmed, so some
function settings cannot be changed.
Note that some effects may not be applied to
movies.
p (Panorama mode)
You can shoot and combine multiple
images to create an image with a wide
angle of view (panoramic image).
1 Use FGHI to specify at which edge the next
picture is to be connected, and then press the A
button.
Direction for
combining frames
2 Press the shutter button to take the rst frame.
The edge of the rst frame is displayed faintly on
the screen.
3 Compose the next shot so that the edge of the
rst frame displayed faintly on the screen overlaps
the subject of the second frame, and press the
shutter button.
4 Repeat step 3 until the desired number of frames
are taken, and then press the A button or
button when nished.
Panorama shooting is possible for up to 10 frames.
The shot images are combined into a single
panorama image by the PC software.
For details on installing the PC software, refer
to (p. 44). In addition, refer to the PC software
help guide for details on how to make panorama
images.
16
EN
Viewing images
1
Press the q button.
Number of frames/
Total number of images
12:30’13/02/26’13/02/26 12:30
4/30
4/30
Playback image
Pictures taken using Q mode are displayed as
a group. Turn the zoom lever to the T side to play
back the image in the group.
2
Use HI to select an image.
Displays
previous
image
Displays
next image
Hold I to fast forward and hold H to reverse.
Press the q button again to return to the shooting
screen.
To play sound recordings
To play sound recordings
To play sound recorded with an image, select the
image and press the A button.
Press FG to adjust volume.
Index view and close-up view
Index view enables quick selection of a desired
image. Close-up view (up to 10× magni cation)
allows checking of image details.
1
Turn the zoom lever.
4/304/30 4/304/30
WT
W
T
12:30’13/02/26’13/02/26 12:3012:30’13/02/26’13/02/26 12:30
’13/02/26 12:30
Single-image view Close-up view
Index view
17
EN
To select an image in index view
To select an image in index view
Use FGHI to select an image, and press the A
button to display the selected image in single-image
view.
To scroll an image in close-up view
To scroll an image in close-up view
Use FGHI to move the viewing area.
Playing back grouped images
If the pictures are taken using Q, the images
taken are displayed as a group during playback.
Several operations are available for the grouped
images; such as expanding to view or erase
images individually, or erasing the grouped images
collectively.
T side
Expands.
Select the image and press the
A button to display the images
individually.
• Use HI to view the previous/
next frame.
A button
Playback/pauses playback.
FG
Adjusts the volume when playing
back images with sound.
If a group frame is erased, all images in that
group are erased collectively. If the group
includes images you want to keep, expand the
group and protect them individually.
18
EN
Playback mode display
Normal
No. Name Normal Detailed No info.
1 Battery check
R
2 Eye-Fi transfer
data
RR
3 Protect
RR
4 Adding sound
RR
5 Upload order
RR
6 Print reservation/
number of prints
RR
7 Current memory
RR
8 Frame number/
total number of
images
RR
9 Compression
R
10 Shutter speed
R
11 Shooting mode
R
12 ISO sensitivity
R
13 Aperture value
R
14 Exposure
compensation
R
15 Shooting
submode
R
16 White balance
R
17 File name
R
18 Image size
R
19 Recording date
and time
RR
20 Grouped image
RRR
12:30’13/02/26’13/0 2/26 12:30
1010
4/304/30
872 34 65
1920
Still image
Detailed
4/304/30
4608×3456
4608×3456
2.02.0F3.0F3.01/10001/1000
AUTO
WB
AUTO
WB
100
ISO
100
ISO
1
MAGICMAGIC
1010
12:30’13/02/26’13/02/26 12:30
N
ORM
100-0004100-0004
4608×3456
4608×3456
AUTO
WB
AUTO
WB
100
ISO
100
ISO
1
N
ORM
100-0004
100-0004
2.02.0F3.0F3.01/10001/1000
MAGICMAGIC
1 872 34
1110 129
13
14
1
6
19 18
15
20 17
65
No information
20
Switching the displays
Switching the displays
The displays change in the order of Normal Detailed No info. each time F (INFO) is pressed.
19
EN
Erasing images during playback
1
Display the image you want to
erase and press G (
).
MENU
Erase Back
Erase
Cancel
4/304/30
100-0004100-0004
2
Press FG to select [Erase], and
press the A button.
Grouped images are erased as a group.
Multiple images or all images can be erased at a
time (p. 35).
20
EN
Shooting movies
1
Press the R button to start
recording.
0:00
RECREC
0:00
0:00:340:00:34
0:00:340:00:34
0:000:00
RECREC
Lights up red when
recording
Recording time
Recording length (p. 65)
The movie is shot in the set shooting mode. Note
that the shooting mode effects may not be obtained
for some shooting modes.
Sound is also recorded.
2
Press the R button again to stop
recording.
Playing back movies
Select a movie, and press the A button.
0:12/0:340:12/0:34
During playbackMovie
4/304/30
OK
Movie PlayMovie Play
’13/02/2612:30’13/02/2612:30
Pausing and
restarting
playback
Press the A button to pause
playback. During pause, fast
forward or reverse, press the A
button to restart playback.
Fast forward
Press I to fast forward. Press
I again to increase the fast
forward speed.
Rewind
Press H to rewind. Press H
again to increase the rewind
speed.
Adjusting the
volume
Use FG to adjust the volume.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79

Olympus SZ-15 User manual

Category
Print & Scan
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI