Highpoint RocketRAID 2711 User guide

Category
RAID controllers
Type
User guide
1
RocketRAID 2700 PCI-Express 2.0 x8
HBA series
SAS/SATA 6Gb/s RAID Host Adapters
Users Guide
Revision: 2.3
Jul. 23, 2015
HighPoint Technologies, Inc.
2
Copyright
Copyright © 2012 HighPoint Technologies, Inc. This document contains materials protected by
International Copyright Laws. All rights reserved. No part of this manual may be reproduced, transmitted
or transcribed in any form and for any purpose without the express written permission of HighPoint
Technologies, Inc.
Trademarks
Companies and products mentioned in this manual are for identification purpose only. Product names or
brand names appearing in this manual may or may not be registered trademarks or copyrights of their
respective owners. Backup your important data before using HighPoint's products and use at your own
risk. In no event shall HighPoint be liable for any loss of profits, or for direct, indirect, special, incidental or
consequential damages arising from any defect or error in HighPoint's products or manuals. Information
in this manual is subject to change without notice and does not represent a commitment on the part of
HighPoint.
Notice
Reasonable effort has been made to ensure that the information in this manual is accurate. HighPoint
assumes no liability for technical inaccuracies, typographical, or other errors contained herein.
3
TABLE OF CONTENTS
1 FEATURES AND SPECIFICATIONS ............................................................................................................ 4
2 Physical Specifications ........................................................................................................................... 5
3 Kit Contents .......................................................................................................................................... 5
4 Hardware Description and Installation .................................................................................................. 6
4.1 RocketRAID 272x/271x Host Adapter board layout ....................................................................... 6
4.2 Connector and Jumper description: ............................................................................................... 7
4.3 Installing the RocketRAID Host Adapter ......................................................................................... 7
4.4 Verifying Installation ..................................................................................................................... 8
5 RocketRAID BIOS Utility ........................................................................................................................ 9
5.1 BIOS Settings Overview ................................................................................................................. 9
5.2 Using the BIOS Utility..................................................................................................................... 9
5.3 BIOS Commands ............................................................................................................................ 9
5.4 Creating RAID Arrays .................................................................................................................... 10
5.5 Deleting Arrays ............................................................................................................................ 13
5.6 Adding/Remove Spare Disks ........................................................................................................ 13
5.7 Settings ........................................................................................................................................ 14
6 HighPoint Software CD ........................................................................................................................ 15
7 RocketRAID 272x/271x Driver Installation .......................................................................................... 16
7.1 Driver installation -Windows ....................................................................................................... 16
7.2 Driver installation -Linux and FreeBSD ......................................................................................... 19
8 HighPoint Web RAID Management software ...................................................................................... 20
8.1 Installing the Web RAID Management software .......................................................................... 20
8.2 Installing OS X Driver and Web RAID Management Software ...................................................... 21
8.3 Starting Using the Web RAID Management Software .................................................................. 21
9 Thank You ........................................................................................................................................... 22
10 CUSTOMER SUPPORT ........................................................................................................................ 23
4
HighPoint RocketRAID 272x/271x – PCI-Express 2.0
RocketRAID 272x/271x Host Adapters
The RocketRAID 272x/271x host adapters are high-performance SAS RAID solutions, delivering reliability
to demanding data-intensive applications such as tiered storage environments, security and surveillance,
video editing, and digital content creation.
Support for both 6Gb/s SAS and SATA drives on the same controller maintains configuration optimization
for performance based on the characteristics of SAS and SATA drives available today.
HighPoint RAID Management HighPoint RAID Management software offers a user friendly interface to
create, manage and maintain your storage solutions. Email notification and remote are some of the
advance features that the RAID Management software has to offer.
1 Features and Specifications
Host Adapter Architecture
PCI-Express x8 (Gen2)
Support up to 4/8 SAS/SATA drives
1 Internal Mini-SAS Connectors (SFF-8087) (RocketRAID 2710)
1 External Mini-SAS Connector(SFF-8808) (RocketRAID 2711)
2 Internal Mini-SAS Connectors (SFF-8087) (RocketRAID 2720)
1 External Mini-SAS Connector (SFF-8088) / 1 Internal Mini-SAS Connector (SFF-8087) (RocketRAID
2721)
2 External Mini-SAS Connectors (SFF-8088) (RocketRAID 2722)
Hot Swap and hot plug
Low Profile
RoHS complaint
Advanced RAID Features
Supports RAID 0, 1, 5, 6, 10,50 and JBOD
NCQ (Native Command Queuing)
Auto detect of unplug/plug SAS/SATA hard drive for RAID auto rebuild
Staggered drive spin up
HDD bad sector repair and remapping
Support Disk Scrubbing
BIOS Booting (INT13) to RAID array for better redundancy
64bit LBA for RAID arrays greater than 2TB single partition
S.M.A.R.T array monitoring for hard drive status and reliability
Array Monitors, Alerts and Indicators
Hard Drive LED Indicators (Activity and Failed) (except RocketRAID 2711/2722)
SMTP email notification for events and error reporting
Alarm/Buzzer alerts for drive/array failure
SAF-TE (I2C) and SGPIO enclosure management
RAID Management
Online Capacity Expansion (OCE) and Online RAID Level Migration (ORLM) for
Windows/Linux/FreeBSD
Quick and Background initialization for instant RAID access
API library for customization
CLI (Command Line Interface) for Linux and FreeBSD
5
Web GUI RAID management (local and remote monitoring)
Online array roaming
SHI (Drive analysis driven from S.M.A.R.T)
HighPoint RAID Management (HRM)
Hot key (ctrl-h) boot-up RAID manager via BI
OS
Web browser-based RAID management software (Web GUI)
Command Line Interf
ace (CLI)
Operating System Support
Windows 7, 8, 8.1, 10 / Windows Server 2008, 2012
Linux (Fedora Core, Red Hat Enterprise / CentOS, SuSE, Debian, Ubuntu)
FreeBSD
OS X (for RocketRAID 2711, 2721 and 2722 only)
2 Physical Specifications
Dimensions:
Size: 96.3mm X 65.0mm (RocketRAID 2710/2720)
Size: 120.0mm X 68.0mm (RocketRAID 2711/2721/2722)
EMI: FCC Part 15 Class B and CE
Thermal and Atmospheric Characteristics:
Work Temperature Range: +5 C ~+ 55 C
Relative Humidity Range: 5% ~ 60% non-condensing
Storage Temperature: -20 ~ +80 C
MTBF: 920,585 Hours
Electrical Characteristics:
PCI-E 3.3V 12V
Power 4W max 1W max
3 Kit Contents
RocketRAID Host Adapter
Quick Installation Guide
HighPoint Software CD
Low-profile bracket
4 H
4.1
R
ardware
D
R
ocketRAI
D
D
escripti
o
D
272x/271
x
o
n and Ins
t
x
Host Ada
p
6
t
allation
p
ter board
l
ayout
RocketRAID 2720
RocketRAID 2721
R
ocketRAID 2710
RocketRAI
D 2711
4.2
C
Connector
/
description
J1
A1 or A2
F1 or F2
BEEP1
PORT1~ PO
R
(Mini-SAS P
o
A
4.3
I
Not
e
The
R
the l
o
1.
O
2.
R
3.
G
c
C
onnector
a
/
Jumper
R
T3
o
rt)
A
ctive/FAIL LE
This connect
o
requirement
I
nstalling t
h
e
: Make sure t
R
ocketRAID 2
7
o
w-profile br
a
O
pen the syst
R
emove the
P
G
ently insert
t
c
hassis (illust
r
a
nd Jumpe
r
RocketR
A
2710
Active LE
D
Fail LED
P
SFF-80
8
D PIN connec
t
o
r is one-pin
c
and display i
n
h
e RocketR
A
he system is
p
7
2x/271x incl
u
a
cket in place
em chassis a
n
P
CI slot/brack
e
t
he RocketRA
I
r
ation shows
R
r
descriptio
A
ID Roc
k
2
D
PIN
P
IN
8
7 SF
F
t
or:
c
onnection fr
o
n
formation, pl
A
ID Host A
d
p
owered-off
b
u
des both sta
n
of the standa
n
d locate an u
n
e
t cover.
I
D card into t
h
R
ocketRAID 2
7
RocketRAID 2722
7
n
k
etRAID
2
711
R
I
2
N/A A
N/A
A
F
-8088
o
m HBA to LE
D
ease refer to:
d
apter
b
efore installi
n
n
dard and lo
w
rd bracket, d
e
n
used PCI-E x
8
h
e PCI-Expres
s
7
20).
R
ocketRAID
2720
2
C connector
ctive LED PIN
Fail LED PIN
A
larm buzzer
SFF-8087
D
on chassis.
F
n
g the Rocket
R
w
-profile brac
k
e
pending upo
n
8
(or PCI-E x1
6
s
slot, and sec
RocketRAI
D
2721
Active LED P
Fail LED PI
N
SFF-8087
&
SFF-8088
F
or detail LED
R
AID host ada
k
ets. It may b
e
n
the chassis
d
6
) slot.
ure the brack
e
D
RocketR
A
IN N/
A
N
N/
A
&
SFF-8
connection
pter.
e
necessary t
o
d
esign.
e
t to the syst
e
A
ID 2722
A
A
088
o
attach
e
m
http://www.highpoint-tech.com/PDF/LED_connection.pdf
4.
A
N
o
at
t
m
a
5.
4.4
V
Onc
e
that
t
1.
w
2.
P
A
fter installin
g
o
te: Many ser
v
t
ached to the
a
nual for pro
p
Close and se
c
V
erifying I
n
e
the host ada
the hardware
Power on th
e
w
ill be displa
y
P
ress “Ctrl”+”
g
the adapter
,
v
er-level chas
s
chassis backp
p
er installatio
n
c
ure the syste
m
n
stallation
pter and har
d
is properly r
e
e
system. If th
e
y
ed during bo
o
H” key combi
,
attach hard
d
s
is include ha
r
lane, rather t
h
n
procedures.
m
chassis.
d
drives have
b
e
cognized.
e
system det
e
o
t up.
nation to acc
e
8
d
rives to the
h
r
d-drive hot-s
w
h
an directly t
o
b
een installed
e
cts the prese
n
e
ss the Rocke
t
h
ost adapter.
w
ap bays. For
o
each individ
u
into the chas
n
ce of the ad
a
t
RAID adapte
r
these system
u
al hard drive
.
sis, boot-up t
h
a
pter, the Roc
r
’s BIOS Utilit
y
chassis, cabl
e
.
Consult the
c
h
e system to
v
ketRAID BIOS
y
.
e
s are
c
hassis
v
erify
Utility
5 R
o
The
R
BIOS
driv
e
chec
Pres
s
.
5.1
B
The
R
and
c
5.2
U
The
f
Alt
Arro
w
Ente
r
Esc
5.3
B
Cr
ea
t
Dele
t
Add
/
capa
Setti
Vie
w
o
cketRAI
D
R
ocketRAID 2
7
Utility will di
s
e
s are detecte
k the power a
s
“Ctrl”+”H” k
e
B
IOS Settin
R
ocketRAID 2
7
c
ontroller rel
a
U
sing the
B
f
ollowing key
s
press Alt to
h
w
keys – use
t
r
– Open the
s
move back t
o
B
IOS Com
m
t
e - this com
m
t
e - this com
m
/
Remove Spa
r
ble of using s
p
ngs - this co
m
w
– this comm
D
BIOS Ut
i
7
2x/271x con
t
s
play informa
t
d by this utili
t
a
nd cable con
n
e
y combinati
o
gs Overvie
w
7
2x/271x con
t
a
ted settings.
B
IOS Utility
s
utilized by th
h
ighlight the t
o
t
hese to mov
e
s
elected tool
b
o
the previou
s
m
ands
m
and is used t
m
and will dele
r
e - this com
m
p
are disks to
a
m
mand opens
t
and is used t
o
i
lity
t
roller will dis
p
t
ion about ha
r
t
y. If any of th
e
n
ections.
o
n to access t
h
w
t
roller BIOS u
t
e RocketRAID
o
ol bar.
e
between dif
f
b
ar command
/
s
menu, canc
e
o open the R
A
te the selecte
m
and is used t
o
a
utomatically
t
he settings
m
o
select betw
e
9
p
lay its BIOS s
r
d drives atta
c
e
hard drives
a
h
e RocketRAI
D
t
ility is an int
e
D
2700 BIOS u
t
f
erent menu i
t
/
execute the s
e
l the selected
A
ID Creation
m
d RAID array.
o
assign hard
rebuild broke
n
m
enu (selectin
g
e
en two view
s
creen during
t
c
hed to the a
d
a
re not detec
t
D
adapter’s BI
O
e
rface that pr
o
t
ility:
t
ems
elected com
m
operation, o
r
m
enu.
disks to funct
i
n
or faulted R
A
g
the boot di
s
s
: Devices (H
A
t
he system's
b
d
apter. Make
s
t
ed, power d
o
O
S Utility.
o
vides manag
e
m
and.
r
exit the BIO
S
i
on as spare d
A
ID arrays.
s
k/array, stag
g
A
RD DISKS), a
n
b
oot process.
T
s
ure all attac
h
o
wn the syste
m
e
ment comm
a
S
Utility
isks. The con
t
g
ered drive spi
n
d Arrays (co
n
T
he
h
ed
m
and
a
nds
t
roller is
i
nup)
n
figured
RAI
D
Init
i
a
they
5.4
C
Initi
Befo
r
conf
i
ENT
E
High
l
each
and
a
crea
t
War
n
disk
s
Cre
a
Sele
c
D
arrays).
a
lize - this co
m
can be used
t
C
reating R
A
alizing Dis
k
r
e creating a
i
guration info
E
R.
light the targ
e
selected dis
k
a
sk you to pr
e
t
e RAID array
s
n
ing: Initializa
s
that do not
c
a
ting Array
s
c
t Create fro
m
m
mand is use
d
t
o create arra
y
A
ID Arrays
k
s:
RAID array,
rmation to t
h
e
t disks using
t
k
. Once all ta
r
e
ss Y (yes) to
s
.
tion will dest
r
c
ontain critica
l
s
:
m
the toolbar
a
d
to prepare
d
y
s.
the disks m
h
e hard disks
.
t
he arrow ke
y
r
get disks hav
e
initialize, or
N
r
oy all pre- ex
i
l
data.
a
nd press Ent
e
10
d
isks for use
w
ust be initial
.
Select the I
n
y
s, then select
e
been select
e
N
(no) to can
c
i
sting data on
e
r.
w
ith RAID arra
y
ized. Disk ini
n
itialize com
m
using Enter.
A
e
d, press ESC.
c
el. Once init
i
the selected
h
y
s. Disks mus
t
tialization w
r
m
and from t
h
A
numeral wil
The utility
w
i
alized, these
hard disks. O
n
t
be initialize
d
r
ites necessa
r
h
e toolbar, an
l be displaye
d
w
ill display a
w
disks can be
n
ly initialize
d
before
r
y RAID
d press
d
before
w
arning,
used to
1.
U
2.
U
w
Not
e
nam
e
3.
O
d
U
se the arro
w
U
se the arro
w
w
ill appear.
U
e
: the Array N
a
e
d at a later t
i
O
n the Creat
e
d
evice list wil
l
w
keys to sele
c
w
keys to highl
U
se the keybo
a
a
me comman
d
i
me, and the
n
e
menu, use t
h
l
appear, and
d
c
t the RAID le
v
ight the Arra
y
a
rd to input a
d
is optional
n
ame of the a
h
e arrow keys
d
isplay all av
a
11
v
el and press
E
y
Name optio
n
new Array N
a
it is not nec
e
rray can be c
h
to highlight t
h
a
ilable hard di
s
E
NTER.
n
and press E
n
a
me, and pre
s
e
ssary to nam
e
h
anged at any
h
e Select Dev
s
k drives.
n
ter. The arra
y
s
s the Enter k
e
e
the array. T
h
time.
ices item and
y
name dialo
g
e
y.
h
e array can
b
press Enter.
A
ue box
b
e
A
4.
H
d
b
5.
N
c
d
y
Not
e
you
t
as a
s
6.
F
Writ
e
Writ
e
at th
7.
S
W
s
8.
T
p
H
ighlight the
t
d
isplayed bef
o
b
een selecte
d
N
ext, Use the
c
apacity will
b
d
isk space for
y
ou wish to s
e
e
: Multiple arr
t
o set aside di
s
ingle disk (b
y
F
or redundan
t
e
Back – utili
z
e
Through
w
e cost of low
e
S
ector Size
A
W
indows ope
r
s
ize. Do not u
T
o complete t
p
ress Enter. P
r
t
arget disks t
h
o
re each sele
c
d
and press th
e
arrow key
b
e displayed.
P
additional ar
r
e
t aside for th
i
ays can be cr
e
sk space that
y
the operatin
g
t
RAID arrays
z
es disk cache
w
rites directly
e
r performan
c
A
lso known a
s
r
ating system
.
se if the oper
a
he creation p
r
r
ess the Y (ye
s
h
at you want
t
c
ted disk. Thi
s
e
ESC key to r
e
to highlight t
h
P
ress ENTER i
f
r
ays/single di
s
i
s particular a
e
ated using t
h
be used to cr
e
g
system).
(RAID 1, 5, 10
(higher perfo
to the disks (
m
c
e).
s
“Variable Se
c
.
This allows
o
a
ting system
a
r
ocedure, use
s
) key to crea
t
12
t
o use, and pr
e
s
number desi
e
turn to the
C
h
e Capacity (
G
f
you wish to
u
s
ks, use the k
e
rray, and pre
s
h
e same set o
f
e
ate another
a
), select the
C
rming)
m
ay reduce t
h
c
tor Size”. Us
e
o
lder operati
n
a
lready supp
o
the arrow ke
y
t
e the array,
o
e
ss Enter to s
e
i
gnates disk o
r
C
reate Menu.
G
B) option an
d
u
se all availab
e
yboard to in
p
s
s Enter.
f
hard disk dri
v
a
rray, set as a
C
ache Policy:
h
e risk of dat
a
e
this option i
n
g systems to
o
rts large volu
y
to highlight
o
r N (no) key t
o
e
lect them. A
r
der. After all
d
press Enter.
le space. If yo
p
ut the amou
n
v
es. The Capa
c
spare disk, o
r
a
loss during a
f you are usin
support volu
m
mes (such as
G
the Start Cre
a
o
cancel the
c
numeral will
b
of the disks h
The total ava
u wish to res
e
n
t of space (in
c
ity option all
r
partitioned
t
critical failur
e
g an older 32
-
m
es over 2TB
i
G
PT).
a
tion item an
d
c
reation proc
e
b
e
ave
ilable
e
rve
GB)
ows
t
o act
e
, but
-
bit
in
d
e
ss.
5.5
D
High
l
The
B
Ente
r
Th
e
u
War
n
5.6
A
This
A
to a
u
RAI
D
Spar
e
rem
o
D
eleting A
r
light the Dele
t
B
IOS utility
w
r
.
u
tility will dis
p
n
ing: all data
A
dding/Re
m
A
dd/Remove
u
tomatically r
e
D
arrays, disks
e
Disk, use th
e
o
ve the Spare
r
rays
t
e command
f
w
ill display a li
s
p
lay a warnin
g
stored on th
e
m
ove Spar
e
Spare comm
a
e
build Redun
d
must be initi
a
e
arrow keys
t
Disk setting f
r
f
rom the tool
b
s
t of availabl
e
g
message. Pr
e
e
array will be
e
Disks
a
nd is used to
d
ant RAID arr
a
a
lized before t
t
o select the t
a
r
om a hard di
s
13
b
ar, and press
e
RAID arrays.
ess Y (yes) to
lost – do not
assign a hard
a
ys (RAID 1, 5
,
hey can be u
s
a
rget disk fro
m
s
k, highlight t
h
Enter.
.
Select the a
r
delete the ar
r
delete if the
disk to act as
,
10) in the ca
s
s
ed as spares.
m
the list of i
n
h
e spare disk,
r
ray you wish
r
ay, or select
N
array contai
n
a Spare Disk.
s
e of disk fail
u
To set a har
d
n
itialized disk
s
and press En
t
to delete, a
n
N
(no) to canc
e
n
s critical dat
a
Spare Disks a
u
re. As with c
r
d
disk to act a
s
s
, and press E
n
t
er.
n
d press
e
l.
a
.
re used
r
eating
s
a
n
ter. To
Gen
e
How
e
spar
e
time
200
G
this
e
be s
e
5.7
S
To a
c
Sel
e
c
the
c
Stag
g
pow
e
setti
n
War
n
If en
a
e
rally, single d
e
ver, in som
e
e
. If the disks
of creation, t
G
B hard disks,
e
xample, 200
G
e
t as spares f
o
S
ettings
c
cess the Sett
i
c
t Boot Devic
e
c
ard to act as
t
g
ered Drive S
p
e
r up the har
d
n
g – consult t
h
n
ing: Western
a
bled, these
d
isks are desig
n
e
instances, di
in question a
hese disks m
a
but only 200
G
B of disk sp
a
o
r a separate r
i
ngs menu, hi
g
e
– select whi
c
t
he boot devi
c
p
inup – This
o
d
disks, seque
n
h
e disk docu
m
n
Digital hard
d
d
isks may not
n
ated to act a
sks that are
m
re part of a R
A
a
y be used as
s
GB of space (
a
ce remains u
n
edundant arr
a
g
hlight the Se
t
c
h disk or arr
a
c
e.
o
ption is disa
b
n
tially (one di
s
m
entation for
m
d
isks do not s
u
be detected
b
14
s spares (disk
s
m
embers of
R
A
ID array tha
t
s
pares. For ex
a
out of a gran
d
n
allocated. T
h
a
y that falls in
t
t
tings comma
a
y will act as t
h
b
led by defaul
t
s
k approxima
t
m
ore informa
u
pport this se
t
b
y non-RAID c
o
s
that are not
R
AID arrays
m
t
did not utili
z
a
mple: a RAI
D
d
total of 400
h
is unallocate
d
t
o the same c
nd from the t
h
e boot disk,
i
t
. Enabling th
t
ely every 2 s
e
tion.
t
ting. Enabli
n
o
ntroller.
configured in
t
m
ay also be d
e
z
e the full ava
D
0 array was
c
GB), was assi
g
d
space woul
d
apacity range
oolbar, and p
r
i
f the mother
b
is setting will
e
conds). Not
a
n
g this setting
t
o RAID array
s
e
signated to
a
ilable capacit
y
c
reated betw
e
g
ned to that
a
d
allow these
(200GB).
r
ess Enter.
b
oard BIOS in
s
instruct the c
a
all disk suppo
is not recom
m
s
).
a
ct as a
y
at the
e
en two
a
rray. In
disks to
s
tructs
a
rd to
rt this
m
ended.
6 H
Each
This
for a
Cre
a
To c
r
1.
I
2.
I
3.
C
4.
C
m
5.
C
o
6.
C
ighPoint
S
retail box inc
CD can be us
e
variety of op
e
a
ting a driv
e
r
eate a driver
I
nsert the CD
I
nsert a blank
C
lick on “Crea
C
lick on the “
P
m
odel from t
h
C
lick on the “
P
o
perating sys
t
C
lick on the “
O
S
oftware
C
ludes a copy
o
e
d to generat
e
e
rating syste
m
e
r diskette
floppy d
isket
t
into the syste
floppy disket
t
te Driver Dis
k
P
lease Select
a
h
e list.
P
lease Select
t
t
em from the
O
K” button to
C
D
o
f the HighPo
i
e
driver diske
t
m
s.
t
e:
m’s CD/DVD
d
t
e into the sy
s
k
ette”.
a
Product” dr
o
t
he Diskette y
list.
create the d
r
15
i
nt Products S
t
tes, and inst
a
d
rive. The pro
g
s
tem’s floppy
o
p-down butt
o
ou want to cr
e
r
iver diskette.
oftware CD.
a
ll the HighPo
g
ram should
s
drive.
o
n, and selec
t
e
ate” drop-d
o
int RAID Man
a
s
tart automat
i
t
the appropri
o
wn button, a
a
gement Utili
t
i
cally.
ate host ada
p
nd select the
t
y Suite
p
ter
desired
Windows / Windows Server and several distributions of Linux and FreeBSD require driver diskettes when
installing the operation system directly to a disk or array hosted by the RocketRAID host adapter.
7 R
o
7.1
D
Inst
a
1.
I
V
2.
W
H
W
3.
W
o
cketRAI
D
D
river inst
a
a
lling the driv
e
I
nstall the Ro
c
V
ista.
W
indows sho
u
H
ardware” wi
W
hen Windo
w
continue”.
W
hen asked t
o
D
2700 Dr
i
a
llation -Wi
e
r for an exis
t
c
ketRAID host
u
ld automati
c
zard pop-up
w
w
s asks: “Win
d
o search onli
n
i
ver Insta
l
ndows
t
ing Windows
adapter into
t
c
ally detect th
e
w
indow. Selec
t
d
ows needs y
o
n
e select “Do
n
16
l
lation
operating sy
s
t
he PC, then
b
e
card, and di
s
t
“Locate and
o
ur permissio
n
’t Search Onli
s
tem
b
oot up Wind
o
s
play the “Fo
u
install driver
s
n to continue
ne
.
o
ws
u
nd New
s
oftware”.
, select
4.
S
5.
a
.
S
elect “I don’
t
a
nd then sele
c
t
have disc, sh
c
t “Browse m
y
ow me other
y
computer f
o
17
options”.
o
r driver soft
w
w
are”.
6.
B
7.
W
B
rowse to th
e
W
hen asked
e
location of t
h
Would you li
k
h
e driver and
c
k
e to install th
i
18
c
lick “Next”.
i
s driver soft
w
w
are?” select
Install”.
8.
R
r
Inst
a
1. B
o
2. W
dri
v
e
seve
r
3. S
e
4. T
h
will
t
7.2
D
Pl
e
in
s
S
o
Pl
e
R
eboot the sy
r
eboots.
a
lling the driv
e
o
ot from the
W
hen the scree
e
r” and brows
e
r
al media typ
e
lect the Rock
e
h
e driver is no
w
t
hen proceed
n
D
river inst
a
e
ase refer to
t
s
tallation ste
p
o
ftware locati
o
/Driver/RR
2
e
ase always c
h
stem when p
r
e
r during a fr
e
W
indows Insta
n “where do
y
e
for the driv
e
e
s: floppy dis
k
e
tRAID 2700 c
w
installed –
t
n
ormally.
a
llation -Lin
t
he Driver Ins
t
p
s.
o
n (RocketRAI
2
72x_1x/Dri
v
h
eck HighPoi
n
r
ompted. The
e
sh Windows
llation DVD.
y
ou want to i
n
e
r location. W
k
ette, USB flas
ontroller driv
e
t
he disk or ar
r
ux and Fre
e
t
allation Guid
e
D Software C
D
v
er
n
t website for
19
RocketRAID h
OS installati
o
n
stall Windo
w
indows can in
h disk or CD.
e
r, and click “
N
r
ay will be re
c
e
BSD
e
and READM
E
D
):
latest softwa
r
ost adapter
w
o
n
w
s” appears,
c
stall drivers f
r
N
ext”.
c
ognized as a
v
E
file under th
r
e download.
w
ill be ready f
o
c
lick “Load
r
om
v
ailable disk s
p
e driver pack
a
o
r use after W
p
ace. Windo
w
a
ge for the
indows
w
s setup
20
8 HighPoint Web RAID Management Software
The HighPoint RAID Management software provides RAID configuration and management features. The
software can be installed from the HighPoint software CD. Browse to the location of the HighPoint RAID
Management software.
8.1 Installing the Web RAID Management Software
Windows
1. Software location (RocketRAID Software CD):
/HighPoint RAID Management Software/Web RAID Management/Windows
2. Double click the “setup.exe” setup program to install the management software
.
3. Af
ter the setup is completed, double click the program shortcut on the Windows desktop to run
HighPoint RAID Management software
:
Lin
ux -Red Hat Enterprise/CentOS, Fedora Core, Open SuSE
Linux operating systems that support .rpm packages, allow you to double-click the HighPoint Web RAID
Management .rpm file to start the installation process.
1. Software location (RocketRAID Software CD):
/HighPoint RAID Management Software/Web RAID Management/Lin
ux
2. E
xtract the .tbz file to the desktop, and browse to the appropriate .rpm file (there are 32 and 64-bit
options).
3. Double click the .rpm file – this should open the operating systems software installer. Enter the
Administrative password when prompted and proceed with installation.
4. The package can also be installed manually, using a terminal. Log on in as “root, open a termin
al, and
bro
wse to the location of the .rpm file. Run the following command:
5. # rpm -i hptsvr-https-1.4-10.i386.rpm (or hptsvr-https-1.4-10.x86_64.rpm)
Linux -Debian/Ubuntu Linux Distributions
For Debian/Ubuntu Linux distributions, you can use alien to convert the rpm
packages to a .deb package, then use "dpkg -i" command to install each
package. Some script files may be lost during the conversion process from rpm to .deb,
so you may need to make manual corrections. .
The following files will be installed/configured:
/usr/bin/hptsvr - service program
/etc/hptcfg - service config file
/etc/rc.d/init.d/hptdaemon - service control script
/usr/share/hpt/webguiroot - data files
If there is no /etc/hptcfg present, you can add it manually using by using the “echo” command on the
driver file name to /etc/hptcfg.
For example:
# echo hptiop.ko>/etc/hptcfg
Uninstalling the Utility
Open a terminal, and use the following command:
# rpm -e hptsvr-https
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23

Highpoint RocketRAID 2711 User guide

Category
RAID controllers
Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI