Chicco SDRAIETTA Owner's manual

SDRAIETTA

SOFT RELAX

RELAX&PLAY/ENJOY

• ISTRUZIONI D’USO

• MODE D’EMPLOI

• GEBRAUCHSANLEITUNG

• INSTRUCTIONS FOR USE

• INSTRUCCIONES DE USO

• INSTRUÇÕES PARA A UTILIZAÇÃO

• GEBRUIKSAANWIJZINGEN

• ANVÄNDNINGSINSTRUKTIONER

• NÁVOD K POUŽITÍ

• INSTRUKCJE SPOSOBU

UŻYCIA

• ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ

• KULLANIM BİLGİLERİ

• ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

•

2

I

F

D

GB

E

P

NL

S

IMPORTANTE: CONSERVARLO PER

OGNI RIFERIMENTO FUTURO – LEGGERE

ATTENTAMENTE

IMPORTANT: LE CONSERVER EN VUE D’UNE

EVENTUELLE CONSULTATION

FUTURE – LIRE ATTENTIVEMENT

WICHTIG: FÜR ZUKÜNFTIGES

NACHSCHLAGEN AUFBEWAHREN-

BITTE DIESE GEBRAUCHSANLEITUNG

SORGFÄLTIG LESEN

IMPORTANT: KEEP FOR FUTURE

REFERENCE - READ CAREFULLY

IMPORTANTE: CONSERVELO PARA

FUTURAS CONSULTAS. – LEA

ATENTAMENTE

IMPORTANTE: CONSERVE-O PARA

CONSULTAS FUTURAS – LEIA

ATENTAMENTE

BELANGRIJK: VOOR LATERE

RAADPLEGING BEWAREN – LEES DEZE

GEBRUIKSAANWIJZINGEN

VIKTIGT: SPARA FÖR FRAMTIDA BRUK –

Page is loading ...

12

BOUNCER

WARNING: FOR YOUR CHILD’S SAFETY, READ THESE

INSTRUCTIONS CAREFULLY AND KEEP THEM FOR FU-

TURE REFERENCE. WARNING: TO AVOID THE DAN-

GER OF SUFFOCATION, REMOVE AND DISPOSE OF

ALL PLASTIC BAGS AND PACKAGING MATERIALS BE-

FORE USING THIS PRODUCT, AND KEEP THEM OUT OF

REACH OF CHILDREN.

WARNINGS

• WARNING: Never leave the child unattended in the

bouncing chair.

• WARNING: It is dangerous to put this bouncing chair

on an elevated surface, such as tables, chairs, etc..

• WARNING: Not recommended for children who can

sit up by themselves (6 months approximately; until

9kg).

• Do not use the bouncing chair for more than one child

at a time.

• Only place the bouncing chair on flat, stable surfaces

• WARNING: Never use the toy bar to carry the bounc-

ing chair.

• Always use the safety harness and the crotch strap

when the child is sitting in the bouncing chair; if neces-

sary, adjust their length using the correct adjusters.

• Do not let other children play unattended close to the

bouncing chair.

• Do not use the bouncing chair if some of its parts are

broken, torn, or missing.

• Do not use spare parts or accessories not supplied by

the manufacturer.

• To prevent the risk of fire, never place the bouncing

chair near sources of heat, electrical appliances, gas or

electric cookers, etc.

• WARNING: The bouncing chair has not been specifi-

cally designed for a child to sleep in. If your child needs

to rest, it is recommended to lay it in a cot.

MAINTENANCE ADVICE

FABRIC COMPOSITION

FABRIC COVER: All new materials: Cover 100% polyes-

ter. Padding: 100% polyester.

INSERT PILLOW: All new materials. Cover 100% polyes-

ter. Padding 100% polyester.

• Periodically check the Bouncing Chair’s frame and

seat fabric for wear, damage, or missing components.

Should any parts be missing or damaged, the Bouncing

Chair’ must not under any circumstances be used.

• Please refer to the care label for instructions on how to

clean the product.

• Always dry metal parts to avoid the formation of rust.

• After cleaning, check that the fabric and seams are not

worn or damaged.

• Prolonged exposure to sunlight may cause the materi-

als to fade.

Wash by hand in cold water.

Do not bleach.

Do not tumble dry.

Do not iron.

Do not dry clean.

COMPONENTS

A – Rear legs

B – Rear handle

C – Pillow/Insert (Only on some versions)

D – Carry handles

E – Side joint to unlock the backrest

F – Front joint to adjust the leg rest

G – Crotch strap

H – Legs

I – Central button of safety harness buckle

L – Safety harness prongs

M – Velcro straps (Only for some versions)

HOW TO ASSEMBLE THE PRODUCT

Before use, the baby-bouncing chair requires a very sim-

ple assembly operation.

1. Turn the legs (H) in an outward direction and fit the

rear part (A) into legs’ holes, pressing the locking but-

tons (diag.1).

2. This operation may be carried out by fitting part A, in one

way only, in order to prevent any assembly errors (diag.2).

3. You will hear a click, signalling that part A has been

fitted into position; ensure that the part has been fit-

ted correctly by trying to pull it away from the frame

(diag.3).

4. Also, ensure that the carry handles (D) of the bouncing

chair are facing outwards with respect to the legs; dia-

gram 4 shows the correct position.

5. When not in use, the carry handles (D) may be faste-

ned to the backrest with the Velcro straps (M), dia-

gram 5. (Only on some versions).

6. If you wish to make the bouncing chair more compact,

for example for car transport, it is sufficient to unlock

part A, pressing the buttons highlighted in diagram 6.

HOW TO USE THE SAFETY HARNESS

7. Unfasten the safety harness by pressing the central

button on the buckle (I) and, at the same time, remove

the other part of the buckle, by pressing its prongs (L)

(diag.7).

The bouncing chair is now ready for baby to use.

GB

8

H

9

H

T

1

R

T

1

H

T

a

1

W

i

t

r

P

T

r

p

f

1

13

t

-

e

-

e

.

n

-

e

g

-

t

,

k

6

.

a

l

e

)

8. Always fasten the safety harness, inserting it through

the crotch strap (G), and check that the harness fas-

tens baby correctly and that it is adjusted/tensioned

correctly (diag. 8).

HOW TO ADJUST THE BACKREST

9. To adjust the backrest, turn the side joints (E) (diag.

9) and recline the backrest to the desired position;

lock the joints by turning them in the opposite direc-

tion (diag.10). This operation may be carried out with

the child sitting in the bouncing chair, although it can

be more difficult. Always hold the backrest with one

hand while adjusting its position.

HOW TO ADJUST THE FOOTREST

The footrest can be adjusted to two positions.

11. Low position: Press the buttons, located on the front

joints (F), and, at the same time, push the footrest in

a downward direction. A click is heard, signalling that

it is locked into position (diag.11).

12. High position: Press the buttons and push the foot-

rest in an upward direction. A click is heard, signal-

ling that it is locked into position (diag.12).

ROCKING POSITION

The baby chair can be used in the “rocking” position.

13. Turn the rear handle (B) following the direction of

the arrow (diag.13).

14. When you wish to use the bouncing chair as a baby

chair, turn the handle in the opposite direction to

prevent rocking (diag.14).

HOW TO REMOVE THE COVER

The cover of the baby-bouncing chair can be removed

and cleaned.

15. Remove the safety harness from the “D” rings; then

remove the cover starting from the front, first from

the footrest, unfastening the Velcro straps located

underneath, and then from the backrest (diag.15).

16. To replace the cover onto the bouncing chair, repeat

the above operations in the reverse order, sliding the

lower fabric strap through the adjusting joints of the

backrest (E), as shown in diagram 16.

WARNING: Fit the safety harness again, checking that

it has been fitted correctly through the holes of the “D”

rings and the crotch strap.

PILLOW / INSERT

The comfort pillow (C) is ideal from birth, and it can be

removed at later stages of the child’s growth. The soft

padding and breathable fabric ensure maximum com-

fort during the first months.

17. To fit it to the seat, insert the crotch strap (G) into

the correct opening of the pillow/insert, as shown in

diagram 17.

CADDY ENJOY BOUNCING CHAIR

The CADDY ENJOY range features fabrics with special

colours, which are used with a wide range of Chicco

Nursery products. For instructions on how to use the

bouncing chair, please refer to this instructions booklet,

with the exception of the “Pillow / Insert” section.

For further information or spare

parts requests, please contact

Chicco UK Ltd Customer Service:

Postal address: CHICCO UK LTD

PROSPECT CLOSE

KIRKBY IN ASHFIELD

NOTTINGHAMSHIRE - NG17 7LF

Telephone: 01623 750870

Website: www.chicco.co.uk

section “contact us”

Page is loading ...

Chicco SDRAIETTA Owner's manual

This manual is also suitable for

Chicco SDRAIETTA Owner's manual

in other languages

Related papers

Other documents