EVOC NPC-8210 User manual

Legal Information

Warnings

Please pay attention to the tips within the manual so as to avoid personal injury or

property losses. The tips for personal injury are indicated in warning triangles while

the tips only related to property losses have no warning triangles. The warning tips are

listed as follows with the hazardous scale from severe to slight.

Danger

If handled carelessly, death or severe human injury will occur.

Warning

If handled carelessly, death or severe human injury might occur.

Caution

Warning triangle indicates that slight human injury might occur if handled carelessly.

Note

Unexpected result or status might occur, if not handled according to the tips.

Professional Personnel

The product/system covered by the manual can only be handled by qualified and

professional personnel. During operation, please follow the respective instructive

manuals, especially the safety warnings. The professional personnel have been trained

and possess relevant experiences; therefore, he/she could be aware of the risks of the

product/system and avoid possible damages.

EVOC Product

Please pay attention to the following instructions:

Warning

EVOC product can only be used according to the descriptions within the manual,

including the contents and the relevant technical documents. If the products or

components from other companies are required, please get the recommendation and

grant from EVOC first. Proper transportation, storage, assembly, installation,

debugging, operation and maintenance are prerequisite to ensure product safety and

normal operation; therefore, please ensure permitted environment conditions and pay

attention to the tips within the manual.

Copyright Notice

Information offered in this manual is believed to be correct at the time of printing, and

is subject to change without prior notice in order to improve reliability, design and

function and does not represent a commitment on the part of the manufacturer. In no

event will the manufacturer be liable for direct, indirect, special, incidental, or

consequential damages arising out of improper installation and/or use, or inability to

use the product or documentation.

This user manual is protected by copyright. No part of this manual may be reproduced,

stored in any retrieval system, or transmitted, in any form or by any means,

mechanical, electronic, photocopied, recorded or otherwise, without the prior written

permission from the manufacturer.

Trademarks

EVOC is a registered trademark of EVOC Intelligent Technology Co., Ltd. Other

product names mentioned herein are used for identification purposes only and may be

trademark and/or registered trademarks of their respective companies.

Warranty Terms:

The warranty on the product lasts for one year. If the user has additional requirements,

the contract signed between the two sides shall prevail.

Please visit our website:

http://www.evoc.com

for more information,

or send an email to the Technical Support Mailbox [email protected]

(International) or [email protected]

(Domestic) for consultation.

Hotline: 4008809666

About this manual

Scope of the Manual

The manual is appropriate for EVOC NPC-8210.

Convention

The term “the PC” or “the Product” within the manual usually stands for EVOC

NPC-8210.

Instructions

Safety instructions

To avoid property losses or individual injury, please pay attention to the safety

instructions within the manual. The warnings within the manual are marked with

warning triangle

, whose existence is dependent upon the scale of the

potential hazard.

Contents

1. Product Introduction .................................................................................................1

1.1 Overview .......................................................................................................1

1.2 Specifications ................................................................................................1

2. Application Scheme ..................................................................................................5

2.1 Transportation................................................................................................5

2.2 Storage...........................................................................................................5

2.3 Opening the Box and Initial Examination......................................................6

2.4 Mounting Method..........................................................................................6

3. Device Connection....................................................................................................7

3.1 Notes before Connection ...............................................................................7

3.2 Product Grounding ........................................................................................7

3.3 Connecting the Device to Power ...................................................................8

4. Operating Instructions...............................................................................................9

4.1 Outer Appearance ..........................................................................................9

4.2 Product External Dimensions and Installation

Dimensions .........................10

4.2.1 Product Dimensions Drawing..........................................................10

4.2.2 Installation Dimensions Drawing ....................................................10

4.3 External Structure........................................................................................11

4.4 Port Definition.............................................................................................13

4.4.1 Network Port ...................................................................................13

4.4.2 USB Port .........................................................................................14

4.4.3 COM Port ........................................................................................15

4.4.4 Display Port.....................................................................................15

4.5 Operation Control........................................................................................16

4.6 Indicators.....................................................................................................17

4.7 IPMI instructions.........................................................................................18

4.8 Using System Setup Program and UEFI Bo

ot Manager..............................22

5. Assembly and Maintenance ....................................................................................29

5.1 Overall Assembly Drawing..........................................................................29

5.2 Opening the Cover.......................................................................................31

5.3 Installation and Removal of Motherboard ...................................................31

5.3.1 Installing the Motherboard ..............................................................31

5.3.2 Removing the Motherboard.............................................................32

5.4 Installation and Removal of HDD ...............................................................32

5.5 Installation and Removal of Power Supply..................................................33

5.5.1 Installing the Power Supply.............................................................33

5.5.2 Removing the Power Supply ...........................................................35

5.6 Installation and Removal of Fan..................................................................35

5.6.1 Installing the Fan.............................................................................35

5.6.2 Removing the Fan ...........................................................................36

5.7 Special Installation Instructions...................................................................37

5.7.1 Memory Module Reinforcement .....................................................37

5.7.2 CF Card Reinforcement...................................................................37

5.7.3 Installing ENC Modular Card (optional).........................................38

5.7.4 Installing the CPU Fans...................................................................38

6. Installing the Drivers ..............................................................................................39

7. Appendix.................................................................................................................40

7.1 Troubleshooting and Solutions ....................................................................40

Product Introdu

ction

NPC-8210 - 1 -

1. Product Introduction

1.1 Overview

NPC-8210 is a high-performance network application platform based on X86

architecture. The machine adopts standard 2U, 19-inch rack mount and modular

design, which is convenient for network and storage

expansion. IPMI and intrusion detection functions are supported, to meet various

network application requirements.

Its motherboard contains Intel® C604 chipset, and supports up to two Intel® Xeon®

E5-2600/2400 families processors. It contains 12 DDR3 DIMMs onboard, supports

ECC memory, the memory capacity can support to 96GB.

Its chassis supports both single power supply and redundant power supply. When the

chassis is used with NET-2814VD2N(B)-01 motherboard, the chassis provides 3

ENM slots in addition to basic IO ports, 1 x standard PCIE x8 slot, 2 x 3.5-inch

drawable HDD, supports up to 24 x 1000Mbps LAN port or 6 x 10000Mbps LAN

port; When the chassis is used with NET-2814VD2N(B)-02 motherboard, it

provides 5 ENM slots.and 4 x 2.5-inch drawable HDD, and supports up to 40 x

1000Mbps LAN port or 10 x 10000Mbps LAN port.

1.2 Specifications

Item Definition

Microprocessor

Supports Intel® Socket-R LGA2011 package Xeon

E5-1600/E5-2600 series CPUs

Chipset

Intel® C604

Memory

Provides 12 240Pin DDR3 memory slots, supporting

UDIMM / RDIMM / LRDIMM, up to eight independent

channels.

Main Functional Index

Display

Supports VGA output display; the maximum resolution

supported is 1920x1440.

Product Introdu

ction

- 2 - NPC-8210

Network

When the chassis is used with EF-EIO-043NPC-01 IO

board, it provides one 10/100/1000Mbps LAN port and

supports Wake-On-LAN; meanwhile, it provides one IPMI

100Mbps network management port;

When the chassis is used with EF-EIO-043NPC-02 IO

board, it provides two 10/100/1000Mbps LAN port and

LAN1 supports Wake-On-LAN.

Expansion bus

 When the chassis is used

with NET-2814VD2N(B)-01 motherboard, it

supports expansion to one PCIe card; supports

111.15mm height; 167.65mm length; compatible

with PCIE3.0/2.0/1.1 standard;provides three ENM

slots;

 When the chassis is used

with NET-2814VD2N(B)-02 motherboard, it can

provide up to 5 ENM slots.

External IO

ports

 Provides 2 x COM port. The COM1 (RJ45) on the

front panel supports serial port redirection function

(externally on front panel); COM2 and IPMI

function share one channel, i.e., when IPMI function

is used, COM2 cannot be used; COM3 is IPMI

external communication port and IPMI code

programming port.

Note: When the chassis is used

with EF-EIO-043NPC-01 IO board, there is

one COM3 port, which is IPMI external

communication port and IPMI code programming

port.

 Provides 2 x SATA 3.0(6GB/s) interface, 2 x

SATA2.0(3GB/s) interface; one MiniSAS interface is

expandable to 4 x SAS 2.0 interface. , all supporting

hog swap (built-in);

 Provides 6 x USB2.0 port. Two of them are

converted to front panel via EF-EIO-043NPC board;

two support USB DOM expansion; the other two are

used for converter cable expansion (built-in);

 Provides 1 x CF card slot (expanded via

EF-EIO-043NPC board);

 Provides 1 x IDE interface (expanded via

EF-EIO-043NPC board), used for DOM expansion

(This interface and CF card cannot be used at same

time);

 Provides 1 x PS/2 keyboard/mouse port;

Product Introdu

ction

NPC-8210 - 3 -

Dimensions

(excluding

mounting ear)

482.6 mm (W) x 88.1 mm (H) x 560 mm (D)

Net weight

Appr 14Kg

Temperature

Operating temperature: 0 ℃ ～ 45 ℃

Storage temperature: -10 ℃ ～ 55 ℃

Humidity

5 %～95 % (non-condensing)

EMC

 Limits of radio disturbance are compliant with

GB9254-2008, class A;

 Limits of immunity are compliant with the threshold

of GB/T 17618-1998;

Reliability

 MTBF≥50000h;

 MTTR≤0.5h.

Safety

Meets basic requirements of GB4943.

Mechanical

and

Environmental

adaptability

 Anti-vibration: 5-19Hz/1.0mm amplitude;

19-200Hz/1.0g acceleration;

 Anti-shock: 10g acceleration, 11ms duration.

Main Performance Index

Power

features

 Input voltage/frequency: 220VAC/50Hz;

 Power consumption of the machine:134.4W (standby

status); power consumption of the machine:280W

(operating BurnIntest，operating CPU、MEM 100%).

Notes:

1. NPC-8210-01 supports up to 24 1000Mbps LAN ports/provides one standard PCIE

x8 slot/two 3.5-inch drawable HDD/single power supply;

2. NPC-8210-02 supports up to 40 1000Mbps LAN ports/4 x 2.5-inch drawable

Product Introduction

- 4 - NPC-8210

HDD/redundant power supply;

3. NPC-8210-03 supports up to 24 1000Mbps LAN ports/provides one standard PCIE

8X slot/2 x 3.5-inch drawable HDD/redundant power supply;

4. NPC-8210-05 supports up to 40 1000Mbps LAN ports/2 x 2.5-inch drawable

HDD/redundant power supply;

5. NPC-8210-06 supports up to 24 1000Mbps LAN ports/2 x 3.5-inch drawable

HDD/single power supply;

6. NPC-8210-07 supports up to 24 1000Mbps LAN ports/2 x 3.5-inch drawable

HDD/redundant power supply;

7. When the chassis is used with EF-EIO-043NPC-01 IO board, the chassis front

panel ETH-A silk screen printing corresponds to LAN1 of EF-EIO-043NPC-01,

and IPMI silk screen printing corresponds to LAN2 of EF-EIO-043NPC-01;

8.When the chassis is used with EF-EIO-043NPC-02 IO board, the chassis front

panel ETH-A silk screen printing corresponds to LAN1 of EF-EIO-043NPC-02,

and ETH-B silk screen printing corresponds to LAN2 of EF-EIO-043NPC-02;

9. 2.5-inch SAS hard drive is not recommended for NPC-8210;

10. Part number of RJ45 serial port of NPC-8210 redirection converter cable:

2360-005711 (optional);

11. It is not recommended to use onboard RAID function for NPC-8210.

Application Sch

eme

NPC-8210 - 5 -

2. Application Scheme

2.1 Transportation

Well-packaged products are suited for transportation by all kinds of vehicles. During

transportation, products should not be put in open cabin or carriage. During

transshipping, products should not be stored in open air without protection from the

atmospheric conditions. Products should not be transported together with inflammable,

explosive and corrosive substances and are not allowed to be exposed to rain, snow

and liquid substances and mechanical force.

2.2 Storage

Products should be stored in package box when it is not used. And warehouse

temperature should be 0°C ~ 40°C, and relative humidity should be 20% ~ 85%. In

the warehouse, there should be no harmful gas, inflammable, explosive products, and

corrosive chemical products, and strong mechanical vibration, shock and strong

magnetic field interference. The package box should be at least 10cm above ground,

and 50cm away from wall, thermal source, window and air inlet.

Caution

Risk of destroying the device!

When shipping the device in cold weather, please pay attention to the extreme

temperature variation. Under this circumstance, please make sure no water

drop (condensation) is formed on the surface or interior of the device. If

condensation is formed on the device, please wait for over twelve hours before

connecting the device.

Application Scheme

- 6 - NPC-8210

2.3 Opening the Box and Initial Examination

Opening the Box

Please pay attention to the following issues when opening the box:

● Do not discard the original packing material. Please keep the original packing

material for re-transportation.

● Please keep the documentation at a safe place. The documentation, which is a part

of the device, is required for initial device debugging.

● When doing the initial examination, please check whether there are distinct

damages to the device caused during the transport.

● Please check whether the delivery contains the intact device and all of the

independently ordered accessories. Please contact the customer service when any

unconformity or transportation damages occur.

2.4 Mounting Method

■19″ Rack Mount □Desktop □Embedded Panel

□Wall Mount □VESA Standard Arm □Portable

□Others___________

Device Connection

NPC-8210 - 7 -

3. Device Connection

3.1 Notes before Connection

Warning

The connected or built-in peripherals with opposite polarities are not allowed.

Warning

The device only operates when connecting with grounded power. No operation is

allowed when the device power is ungrounded or only impedance is grounded.

Warning

Rated voltage of the device in use shall be in accord with power feature of the

product.

Note:

Only the peripheral devices approved for industrial application can be used. When

operating the device, hot swappable IO modules (USB) can be used. The IO devices

without hot swap function can only be connected when the device is powered off.

3.2 Product Grounding

Low impedance ground connection is more helpful to release the interference

produced by the external cables, the signal cables or the cables connecting the IO

module to the grounding system.

Ground Terminals

Connect the grounding wire to

the ground screw of the chassis.

The minimum cross section

area of the cable shall be no less

than 5mm

2

.

the grounding locations of NPC-8210

Device Connection

- 8 - NPC-8210

3.3 Connecting the Device to Power

Steps to connect the device to power:

Connect the power cable to the

single power supply AC power

connector, please confirm the

input voltage is accord with the

characteristic of the product

supply before insertion.

NPC-8210 single power supply

Steps to connect the device to power:

Connect the power cable to the

redundant power supply AC

power connector, please confirm

the input voltage is accord with

the characteristic of the product

supply before insertion.

NPC-8210 redundant power supply

Operating

Instructions

NPC-8210 - 9 -

4. Operating Instructions

4.1 Outer Appearance

NPC-8210 (used with NET-2814VD2N(B)-01 motherboard)

Different configuration, slight difference in outer appearance. In this picture, the

front panel supports expansion to ENC card

NPC-8210 (used with NET-2814VD2N(B)-02 motherboard)

Different configuration, slight difference in outer appearance. In this picture, the

front panel supports four 2.5-inch HDD trays as full configuration.

Operating Instructions

- 10 - NPC-8210

4.2 Product External Dimensions and Installation Dimensions

4.2.1 Product Dimensions Drawing

Product outer dimensions drawing. The front panel may vary slightly based on the

mated motherboard and configuration.

used with NET-2814VD2N(B)-01 used with NET-2814VD2N(B)-02

motherboard motherboard

Unit: mm

4.2.2 Installation Dimensions Drawing

NPC-8210 product installation dimensions drawing. The front panel may vary slightly

based on the mated motherboard and configuration.

used with NET-2814VD2N(B)-01 motherboard

Operating

Instructions

NPC-8210 - 11 -

used with NET-2814VD2N(B)-02 motherboard

Unit: mm

4.3 External Structure

NPC-8210 (used with NET-2814VD2N(B)-01 motherboard)

Front view of the device

Item Description

① Reset button

② LED

③ USB

④ CONSOLE port

⑤

ETH-A/IPMI port or

ETH-A/ETH-B

⑥ Drawable ENM module

⑦ ENC module(optional)

⑧ 3.5-inch drawable HDD

Operating Instructions

- 12 - NPC-8210

Rear view of the device Item Description

①

Drawable fan

module

② BYPASS switch

③ Ground screw

④ VGA

⑤ Power

⑥ Power switch

NPC-8210(used with NET-2814VD2N(B)-02 motherboard)

Front view of the device Item Description

① Reset button

② LED

③ USB

④

CONSOLE port

⑤

ETH-A/IPMI port

or ETH-A/ETH-B

⑥

Drawable ENM

module

⑦

Drawable ENM

module

⑧

2.5-inch drawable

HDD(Optional

quantity)

Operating

Instructions

NPC-8210 - 13 -

Rear view of the device Item Description

①

Drawable fan

module

② BYPASS switch

③ Ground screw

④ VGA

⑤ Power

⑥ Power switch

4.4 Port Definition

4.4.1 Network Port

1. The front panel provides one 10/100/1000Mbps RJ45 network port LAN1,

supporting Wake-On-LAN. Its pin definition is as follows:

LILED

(dual-color: yellow and

green)

Network

speed

ACTLED

(single color:

green)

Network activity

Green

1000Mbps

Flash

Data being transmitted Yellow

100Mbps

Off

No data being

transmitted

Off 10Mbps

2. The front panel provides one 10/100Mbps RJ45 IPMI management port LAN2. Its

pin definition is as follows:

Operating Instructions

- 14 - NPC-8210

ACTLED

(single color:

green)

Network activity

LILED

(dual-color:

yellow and green)

Network

speed

Flash

Data being transmitted

Yellow Linked

Off

No data being

transmitted

Off Not linked

ACTLED

(single color:

green)

Network activity

LILED

(dual-color:

yellow and green)

Network

speed

Flash

Data being transmitted

Yellow 100Mbps

Off

No data being

transmitted

Off 10Mbps

3. The front panel provides two 10/100/1000Mbps RJ45 network ports. LAN1

supports Wake-On-LAN. Their pin definitions are the same with LAN1 on the front

panel.

4.4.2 USB Port

The front panel provides two front-accessible USB ports. Their pin definitions are as

follows:

Pin Signal Name

1

+5V_USB

2

USB_DATA-

3

USB_DATA+

J2

4

GND

Operating

Instructions

NPC-8210 - 15 -

4.4.3 COM Port

The front panel provides two COM ports. COM1 is RJ45 port, and supports serial

port redirection. Its pin definition is as follows:

Pin Signal Name

1

RTS#

2

DTR#

3

TXD

4

GND

5

GND

6

RXD

7

DSR#

COM1

8

CTS#

4.4.4 Display Port

The rear panel provides one VGA port. Its pin definition is as follows:

Signal

Pin Signal Name

1 Red 2 Green

3 Blue 4 NC

5 GND 6 GND

7 GND 8 GND

9 NC 10 GND

11 NC 12 DDCDATA

13 HSYNC 14 VSYNC

VGA

15 DDCCLK

Page is loading ...

EVOC NPC-8210 User manual

EVOC NPC-8210 User manual

Related papers

Other documents