Fetco Extractor Operating instructions

Programing Instructions for ExtractorExtractorTM Coffee Brewing Systems

FETCO, LUXUS, Extractor, Millenia, Pulse-Brew are all trademarks or registered trademarks of FETCO.

Turn the brewer off by pressing the main power switch

(located under the front panel, directly behind the front

leg). Press the main power switch again to turn the unit on.

Display will read “Stby”.

Quickly hold the stop button for 3 seconds. The display will

read “Prg” while you are holding in the stop button. After 3

seconds the display will read the software version and then

switch to the programing display.

The programming display shows 2 series of numbers. The

first series shows the batch number and parameter number.

For example 1.1 = batch 1, parameter 1. The second series

of numbers is the setting for that specific parameter.

Advance to Next

Parameter Scroll Up Scroll Down Save Changes

and Exit

This manual is also suitable for