Coinco 9302-CGX Installation guide

Brand: Coinco

Model: 9302-CGX

Type: Installation guide

Coinco 9302-CGX is a coin changer that offers a variety of features and use cases to enhance your vending machine's capabilities. With its ability to accept and dispense various currencies, including U.S. and Canadian coins, it provides flexibility in accepting payments from customers. The coin changer also allows you to set the vend price, ensuring accurate and consistent pricing for your products.

Coinco 9302-CGX is a coin changer that offers a variety of features and use cases to enhance your vending machine's capabilities. With its ability to accept and dispense various currencies, including U.S. and Canadian coins, it provides flexibility in accepting payments from customers. The coin changer also allows you to set the vend price, ensuring accurate and consistent pricing for your products.

Installation Instructions

Model: 9302-CGX

Canada

Coin Acceptors, Canada

1-435 Four Valley Drive

Concord, Ontario L4K 5X5

(905) 738-5777

Coinco Publication No. 922485 Rev. 2 09/2004 Printed in the U.S.A.

Quality ...

Depend On It!

•Operating Voltage: 34V PDC.

•Tuning Specification: TS-115.

•Coins Accepted: U.S. 5¢, 10¢ and 25¢ coins and

Canadian 5¢, 10¢, 25¢, $1 and $2 coins.

•Pays out change in 5¢, 10¢ and 25¢ coins.

Coin Changer

Specifications

1) Remove power from the vendor.

2) Remove the acceptor from the coin changer by

releasing the acceptor latches and pulling the top of

the acceptor forward, away from the changer. Unplug

the ribbon cable from changer. With the acceptor

removed, set the key holes in the back of the changer

housing over the mounting screws in the vendor.

Tighten snugly.

3) Set the changer option switches (see "Setting the Vend

Price and Option Switches").

4) Replace the acceptor by inserting bottom accepted

studs into the changer housing guides. Plug the ribbon

cable into the changer. Press top of acceptor into

changer housing until the acceptor studs lock into the

acceptor latches.

5) Plug the coin changer into the vendor.

6) Load the coin tubes, making sure all coins lie flat.

7) Test with a variety of coins to ensure proper operation.

Installing The

Coin Changer

See Vendor Manual for price setting instructions.

Setting The

Vend Price

Setting The

Option Switch

Module

The Option Switch Module (see Figure 1) is composed of

three rocker switches. These switches are ON when the

top of the switch is pushed in. These switches correspond

as follows:

Switch 1 Controls the acceptance of Canadian coins.

ON Accepts U.S. and Canadian coins.

OFF Accepts U.S. coins only.

Switch 2 Determines at what coin tube level accepted quarters

will be directed to the cash box.

ON Activates the middle coin tube sensor.

OFF Activates the upper coin tube sensor.

Switch 3 Controls the acceptance of the Canadian $2 coin.

ON Accepts the Canadian $2 coin.

OFF Rejects the Canadian $2 coin.

Figure 1

1
2

Coinco 9302-CGX Installation guide

Brand: Coinco

Model: 9302-CGX

Type: Installation guide

Coinco 9302-CGX is a coin changer that offers a variety of features and use cases to enhance your vending machine's capabilities. With its ability to accept and dispense various currencies, including U.S. and Canadian coins, it provides flexibility in accepting payments from customers. The coin changer also allows you to set the vend price, ensuring accurate and consistent pricing for your products.

Related papers

Other documents