Lynk 421121 Installation guide

Brand: Lynk

Model: 421121

Type: Installation guide

Set drawer onto glide frame with holes

in drawer and glide aligned

Check for adequate cabinet and

door clearance

Adjust glide frame position if needed

4 Mounting

holes

Check Cabinet Clearance

As shown using alignment guide

found in parts bag

2 ” min.

50.8mm

Alignment

Guide

2.5” min.

63.5mm

2 ” min.

50.8mm

Make sure arrows

are pointing to the

front of the cabinet

20” Drawers require

more side clearance

4” min.

101.6mm

Align Glide Frame

Using #1 small wood screws and brackets

Do not over tighten

Attach Wood Front

Small Wood Screw (4)

Bracket (2)

Align Wood At Front of Drawer

Front

Holes (4)

packing

materials

Glide

Frame

Drawer

Front

Wood

Floor

Parts

Bag

Wood Front

Unpack

Small Wood Screw (4)

Bracket (2)

Instructions

Alignment Guide

Large Wood Screw (4)

Mounting Screw (4)

Discard

8 places

Discard

4 places

#421121DS – #421421DS – #421721DS – #422021DS Roll Out Wood

Roll Out Wood Drawers

Set drawer onto glide frame with drawer and

glide mounting holes aligned

Attach Drawer

Insert Wood Floor

Turn screws

until just snug

Mounting Screw (4)

Install front

screws ﬁrst

Recommended:

Use of a Power Screwdriver

Drill 4 starter holes using a

1/8” diameter drill bit

For 17” and 20” drawers

Use holes nearest to

glide rails (as shown)

Move inner

glide rails

forward

Optional for 20”drawers:

Use 2 extra screws in back

Remove drawer from glide frame

Move inner glide rails slightly forward as shown

Mount glide frame into cabinet using

#2 large wood screws found in parts bag

Mount Glide Frame

Large Wood Screw (4)

LIMITED WARRANTY AND DISCLAIMER OF LIABILITY

The manufacturer warrants this product against defects in manufacturing and workmanship for a period of ninety (90) days from the date of purchase. For questions, call

(800) 733-5965 for customer service.

MANUFACTURER DISCLAIMS ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE WITH REGARD TO THE PRODUCT. IN NO EVENT SHALL MANUFACTURER BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES

WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, INJURY TO PERSON OR PROPERTY, OR ANY OTHER INCIDENTAL, CONSEQUENTIAL OR

PECUNIARY LOSS), OR FOR ATTORNEY’S FEES OR COSTS, ARISING OUT OF THE USE OR OPERATION OF THE PRODUCT.

If you have questions, please call 800-733-5965

www.lynkinc.com

#421121DS – #421421DS – #421721DS – #422021DS Roll Out Wood