Features
n For submersed or in-line use
n Epoxy coated die-cast aluminum housing
n Oil-filled motor
n 17.3' maximum lift
n 200 watts
n 1/2" MNPT discharge (accepts 3/4" I.D. tubing)
n Thermal overload protection
Construction
n Motor — 1/15 HP oil filled
n Maximum Flow Rate — 500 GPH @ 1'
n Maximum Head — 17.3'
n Intermittent Liquid Temp. up to — 120°F
n Intake — 1/2" FNPT
n Discharge — 1/2" MNPT
n Housing — Epoxy coated cast aluminum
n Cover — Epoxy coated cast aluminum
n Volute — Nylon
n Impeller — Nylon
n Shaft Seal — Triple-lip Viton
®
n Screen — Polypropylene
Dual Purpose Pumps
3E-12N Series
Dual purpose oil-filled pump that may be used totally submersed or in-line (fed with pipe or hose). For commercial,
industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants,
and many other applications where liquid must be transferred or recirculated. This compact 500 GPH pump features a
1/2" MNPT discharge and 17.3' shut-off head capability.