VAS PRO9005GB Assembly Instruction Manual

Brand: VAS

Model: PRO9005GB

Type: Assembly Instruction Manual

VAS PRO9005GB is a high-quality 30-inch Audio/Video Tower designed to meet your entertainment needs. With its sturdy construction and ample storage space, this tower provides a stable and stylish platform for your audio-visual equipment and accessories. The tower features multiple shelves of varying sizes, allowing you to customize the layout to accommodate your specific components. The top shelf is ideal for a flat-panel TV up to 40 inches, while the lower shelves can be used for DVD players, gaming consoles, or other devices.

Model # PRO9005GB

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT

SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

VAS Furniture Mfg. Inc. Factory No. 33-10944 Page 1

LOT No.:

DATE OF PURCHASE:

30-inch Audio/Video Tower

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if you are missing parts, do not return this item to

the Retailer Store. Please call our toll free customer service number and have your instructions

and parts list ready to provide the model name, part name or factory number:

1-866-942-5362 8:30 a.m. - 4:30 p.m. PST, Monday - Friday

ONLINE: www.whalenfurniture.com EMAIL: parts@whalenfurniture.com

Video Instruction Guides

Go to http://whalen.showuhow.com to view step-by-step instructional

videos for assembling and installing your product. Enter the following

product number on the ShowUhow homepage.

PRO9005GB

Model # PRO9005GB

VAS Furniture Mfg. Inc. Factory No. 33-10944 Page 2

QUALITY GUARANTEE

We are confident that you will be delighted with your VAS Furniture purchase.

Should this product be defective in workmanship or materials or fail under

normal use, we will repair or replace it for up to 1 year from date of purchase.

Every VAS Furniture product is designed to meet your highest expectations.

This warranty gives you specific legal rights and you may also have other rights

which vary from State to State.

Customer Service: 1-866-942-5362

8:30 a.m. - 4:30 p.m. PST Monday to Friday

WWW.WHALENFURNITURE.COM

MANUFACTURER: VAS FURNITURE

CATALOG: 30-inch Audio/Video Tower (PRO9005GB)

DATE OF MANUFACTURE: June 2009

MADE IN CHINA

MAXIMUM LOAD 25 LBS

FITS UP TO MOST 40” FLAT PANEL TV’S

MAXIMUM LOAD 80 LBS

MAXIMUM SHELF LOAD 50 LBS

This unit is intended for use only with the products and maximum

weights indicated. Use with other products or products heavier than the maximum

weights indicated may result in instability causing possible injury.

Notes: Plasma TV’s with base support should be placed squarely in the center of the

stand with no overhanging on either side.

Please call for replacement parts or assistance: 1-866-942-5362

Model # PRO9005GB

VAS Furniture Mfg. Inc. Factory No. 33-10944 Page 3

Please call for replacement parts or assistance: 1-866-942-5362

Furniture Tipping Restraint

Young children may be injured by tipping furniture and the use of a tipping restraint is

highly recommended. This hardware, when properly installed, could provide

protection against the unexpected tipping of furniture due to improper use.

Warning: This product is only a deterrent and is not a substitute for proper adult

supervision.

Follow instruction printed on the White bag inside the hardware for this unit. You

must install the hardware with the product in use.

Care and Maintenance

We use only top quality materials. To preserve the luster and beauty we recommend

you treat this furniture regularly with quality cleaning Oil.

Compare this furniture and you will find we offer one of the Best Values in the

marketplace today.

We hope you enjoy your purchase for many years

ASSEMBLY TIPS

Read all instructions BEFORE assembly.

Remove all hardware from box and sort by size.

Check to see that all hardware and parts are present BEFORE assembling.

Ask a friend to assist you with the assembly of this furniture.

To avoid damage, assemble the unit on a sturdy, level and non-abrasive surface.

Please wait until all steps are completed before tightening bolts.

Make sure all bolts are tightly fastened before the unit is used.

Model # PRO9005GB

VAS Furniture Mfg. Inc. Factory No. 33-10944 Page 4

A- To

Parts & Hardware List

Please read completely through the instructions and verify that all parts listed are

present before beginning assembly.

Please call for replacement parts or assistance: 1-866-942-5362

p Shelf Frame (1) B- Second Shelf Frame (1) C- Large Shelf Frame (1)

D- Fourth Shelf Frame (1) E- Bottom Shelf Frame (1) F- Lower Spine (1)

(with threaded inserts on bottom for leveler)

G- Upper Spine (1) H- Top Glass (1)

I- Small Glass Shelf (1) J- Large Glass Shelf (1)

K- Bottom Glass Shelf (2) L- Front Panel (1)

Model # PRO9005GB

VAS Furniture Mfg. Inc. Factory No. 33-10944 Page 5

Parts & Hardware List

Please read completely through the instructions and verify that all parts listed are

present before beginning assembly.

M- Front Left Support (2) N- Front Right Support (2) O- Back Left Support (2)

P- Back Right Support (2) (1)- 2 1/8” Bolt (10+1 extra) (2)- 1 1/4” Bolt (1+1 extra)

(3)- 5/8” Bolt (48+2 extra) (4)- Lock Washer (59+2 extra) (5)- Flat Washer (59+2 extra)

Please call for replacement parts or assistance: 1-866-942-5362

(6)- Suction Cup (33+1 extra) (7)- Glass Pin (2) (8)- Floor Leveler (2)

Allen Wrench (1) Tipping Restraint Hardware Kit (1)

(Inside Plastic White Bag)

Tools Required: Allen Wrench (provided).

Model # PRO9005GB

VAS Furniture Mfg. Inc. Factory No. 33-10944 Page 6

Assembly Instructions

Note: Please do not fully tighten all bolts until you finish assembling all parts, then go

back and fully tighten all bolts, this will make it easier during assembly of unit.

1. Unpack the unit and confirm that you have all the hardware and required parts listed.

2. Attach two Floor Levers (8) to the bottom threaded inserts of Bottom Shelf Frame (E) for the

necessary adjustment as shown in detail #1.

3. Insert the upper part of Lower Spine (F) into the Upper Spine (G) to form a long Spine.

Secure them in place using two 5/8” Bolts (3) with Lock Washer & Flat Washer (4 & 5)

through the upper hole set. As shown in detail #1A.

Parts Provided Qty Tools Required

E- Bottom Shelf Frame (1) Allen Wrench

F- Lower Spine (1)

G- Upper Spine (1)

(3) - 5/8” Bolt (2)

(4) - Lock Washer (2)

(5) - Flat Washer (2)

(8)- Floor Leveler (2)

Please call for replacement parts or assistance: 1-866-942-5362

Model # PRO9005GB

VAS Furniture Mfg. Inc. Factory No. 33-10944 Page 7

Assembly Instructions

4. Locate the assembled Spine and set back face down on a scratch free surface as shown in

detail #2.

5. Align and attach Top Shelf Frame (A) to the top of the Spine, using the 5/8” Bolts (3) with

Lock Washer & Flat Washer (4 & 5) through the bracket holes into the Spine. Tighten bolts

with provided Allen Wrench, see detail #2.

6. Repeat last procedure to attach the other Shelf Frames (B, C, D & E) onto the Spine in

place. Make certain the Floor Levelers on Bottom Shelf Frame (E) are facing bottom as

shown in detail #2.

Parts Provided Qty Tools Required

A – Top Shelf Frame (1) Allen Wrench

B – Second Shelf Frame (1)

C – Large Shelf Frame (1)

D – Fourth Shelf Frame (1)

(3) - 5/8” Bolt (24)

(4) - Lock Washer (24)

(5) - Flat Washer (24)

Please call for replacement parts or assistance: 1-866-942-5362

Model # PRO9005GB

VAS Furniture Mfg. Inc. Factory No. 33-10944 Page 8

Assembly Instructions

7. Flip over last assembly.

8. Align and attach the lower 3 Shelf Frames to Front Panel (L). Insert and screw six 5/8” Bolts

(3) with Washer (4 & 5) through the end bracket holes and one 1 1/4″Bolt (2) with Washers

(4 & 5) through the middle hole on front rail of Large Shelf Frame (C) into the threaded

inserts on the Front Panel. See detail #3.

Note: Make sure the Front Panel is flush with the top surface of Top Frame.

9. Proceed to fasten all Shelf Frames to the assembled Spine using the 2 1/8” Bolts (1) with

Washers (4 & 5) through the predrilled holes of the Spine into place, two bolts per Shelf

Frame. Tighten bolts with Allen Wrench provided as shown in detail #3A.

Parts Provided Qty Tools Required

L – Front Panel (1) Allen Wrench

(1) - 2 1/8” Bolt (10)

(2) – 1 1/4” Bolt (1)

(3) - 5/8” Bolt (6)

(4) - Lock Washer (17)

(5) - Flat Washer (17)

Please call for replacement parts or assistance: 1-866-942-5362

Model # PRO9005GB

VAS Furniture Mfg. Inc. Factory No. 33-10944 Page 9

Assembly Instructions

10. Turn the unit upright.

11. Attach the Front Left & Front Right Supports (M & N) in place to connect the Shelf Frames

(C & D) with Front Panel (L) using the 5/8” Bolts (3) with Washers (4 & 5), as shown in detail

#4.

12. Attach the Back Left and Back Right Support (O & P) to the Shelf Frames (C & D) and

Lower Spine (F) in place with the 5/8” Bolts (3) with Washers (4 & 5), as shown in detail #4.

Parts Required Qty Tools Required

M- Front Left Support (2) Allen Wrench

N - Front Right Support (2)

O –Back Left Support (2)

P –Back Right Support (2)

(3) - 5/8” Bolt (16)

(4) -Lock Washer (16)

(5) -Flat Washe

(16)

Please call for replacement parts or assistance: 1-866-942-5362

Model # PRO9005GB

VAS Furniture Mfg. Inc. Factory No. 33-10944 Page 10

Assembly Instructions

13. Put Suction Cups (6) into top holes of all Shelf Frames in place as shown in detail #5.

14. Place the Top Glass and Glass Shelves (H, I, J & K) in place, make sure the glasses are

center and the cut edges point towards back. See detail #5.

15. Proceed to align and secure the Top Glass & Small Glass Shelf (H & I) in place with two

provided Glass Pins (7) through the pre-drilled hole on Glass into top hole of the Upper

Spine (G) and the bracket welded on the Second Shelf Frame (B) respectively, as shown in

detail #5A.

Note: Make sure that the Glass sits correctly and the Glass Pins go all the way into the

bracket to prevent the glass shelf from falling and getting damage. If glass is scratched you

can repair by using a BLACK marker and filling in scratched area from underneath.

Parts Required Qty Tools Required

H- Top Glass Shelf (1) No Tool Required

I – Small Glass Shelf (1)

J- Large Glass Shelf (1)

K– Bottom Glass Shelf (2)

(6) – Suction Cup (33)

(7)- Glass Pin (2)

Please call for replacement parts or assistance: 1-866-942-5362

Model # PRO9005GB

VAS Furniture Mfg. Inc. Factory No. 33-10944 Page 11

Assembly Instructions

16. In case of uneven floor, simply tilt the unit back and use your hand to turn the Floor Levelers

attached at the bottom of Bottom Shelf Frame (E) to correct tilting, until the unit is level. As

shown in detail #6.

17. Now follow the instructions printed on the plastic white bag in order to mount the Tipping

Restraint Hardware Kit to the Upper Spine (G) properly. As shown in detail #6.

NOTE: YOU MUST USE THIS TIPPING RESTRAINT TO ATTACH THIS UNIT TO

THE WALL, TO PREVENT ACCIDENTS AND/OR INJURIES.

18. The audio video tower is ready for use now. Be sure to position your TV in center of Large

Glass Shelf with no overhang on either side.

Tools Required: Allen Wrench (provided), Phillips Screwdriver, Mallet, Power Drill, and 3/8”

Drill Bit

Your assembly should now be complete.

Thank you for your purchase.

Please call for replacement parts or assistance: 1-866-942-5362

VAS PRO9005GB Assembly Instruction Manual

Brand: VAS

Model: PRO9005GB

Type: Assembly Instruction Manual

Download PDF

report

VAS PRO9005GB Assembly Instruction Manual

VAS PRO9005GB Assembly Instruction Manual

Related papers

Other documents