Moen Eva 69000 Specification

Category
Sanitary ware
Type
Specification
DESCRIPTION
Metal construction with various finishes identified by suffix
1/2" IPS connections
OPERATION
Lever style handles
Maximum handle rotation angle is 90˚ to full on for either handle
Hot side counterclockwise to open (clockwise to close)
Cold side clockwise to open (counterclockwise to close)
FLOW
Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi, for products made
before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
1224 cartridge design
Nonmetallic, nonferrous and stainless steel material
STANDARDS
Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1, and
all applicable requirements referenced therein including NSF61/9
Contains no more than 0.25% weighted average lead content
Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
ADA for lever handles
WARRANTY
Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
5 year warranty if used in commercial installations
EVA™
Two Handle Widespread
Lavatory Faucet
Models: T6420 series
Valve: 9000, 69000
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 3 HOLES, 1-1/8" MIN. DIA.
4“
(102mm)
4-7/8“
(124mm)
4-1/8“
(105mm)
2“
(51mm)
Lift
Rod
2-1/4“
(57mm)
3“
(76mm)
3-1/2“
(89mm)
8
(204mm)
6“
(153mm)
QUICK CONNECT
HOSE ASSEMBLY
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 3/11
  • Page 1 1

Moen Eva 69000 Specification

Category
Sanitary ware
Type
Specification

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI