Jabra Noise User manual

Jabra Noise Guide

What is the function of the Jabra Noise Guide USB key?

The Jabra Noise Guide USB key contains the Jabra Noise Guide software

for your Windows computer.

After installing the software, you can use the USB key for the following

purposes:

Transferring log measurements from the internal log to the Jabra Noise

Guide software using the USB key.

Transferring your light configuration from the Jabra Noise Guide

software to the Jabra Noise Guide unit using the USB key instead of

connecting directly to your computer. This may be useful if you have

multiple units spread around the office, or if you change the

configuration of the Jabra Noise Guide.

Storing measurement data directly on the USB key. All measurement

data is then logged on the USB key as well as in the internal log. This

may be useful if you want a more detailed view of the data than ‘LAeq 1

minute’. If you store data with the USB key connected directly in the

Jabra Noise Guide, you obtain very detailed data with eight measuring

points every second. You can view the log measurements as LAeq

measurements in the Jabra Noise Guide software afterwards.

The software is available for Windows on the Jabra Noise Guide product

support page.

If needed, you can update the firmware in the Jabra Noise Guide using

the USB key. Some company firewalls may prevent the software from

downloading a firmware update to the USB key. Contact your

company’s IT support for guidance about firmware files and installation.

02/10/2022 01:27

https://www.jabra.in/supportpages/jabra-noise-guide/14207-41/faq/0b0a72b7-edb4-

498e-b1e1-b09add0a3bc9

Page 1 of 2

Note:

Depending on your operating system, you may need to format the USB key

so you can transfer to or extract data from it.

02/10/2022 01:27

https://www.jabra.in/supportpages/jabra-noise-guide/14207-41/faq/0b0a72b7-edb4-

498e-b1e1-b09add0a3bc9

Page 2 of 2