2. Luxpro
  3. LP140

Luxpro LP140 User manual

  • I have reviewed the user manual for the LuxPro LP140 Mini Area Light Keychain. This document provides detailed instructions on how to operate and maintain this compact and durable light, including battery replacement and mode cycling. I'm ready to assist you with any questions you might have about this device.
  • How do I turn the light on and off?
    How do I cycle between modes?
    How do I replace the batteries?
Mini Area Light Keychain Compact-durable design
Diffused lens area light
High quality swivel clasp
Enhanced rubber grip
Tactical tail cap button
O-ring sealed, weather-resistant
LP140
Usage and Maintenance
Product Warranty
Features
Operation Instructions
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
luxpro.com
866.553.8886
USER MANUAL
Care Instructions: If you know it’s going to be a while
between uses, we suggest removing batteries from your
light and storing your gear in a dry, protected place.
Limited 30-Day Warranty against manufacturer’s defects
from time of purchase. For warranty claims contact
LuxPro by calling 801-553-8886 or sending an email to
[email protected].
Low
High
ANSI/PLATO FL1 STANDARD
8lm
26lm
LUMENSMODES
6h
2h
RUN TIME
3m
5m
BEAM
DISTANCE
On/Off: Press and release button
Cycle modes: From High mode, press and release
button, then press button again (High/Low).
Battery Replacement: In a dry environment, unscrew the
tailcap by turning counter clockwise. Remove batter-
ies from the light, then remove batteries from plastic
sleeve. Insert the new batteries into the plastic sleevee
(+) end first, then into the tube (+) end first. Carefully
reinstall the tailcap by pressing lightly while turning
clockwise.
/