TP-LINK tp-link VIGI Wi-Fi Network Camera User guide

Brand: TP-LINK

Model: tp-link VIGI Wi-Fi Network Camera

Type: User guide

TP-Link VIGI Wi-Fi Network Camera lets you see your home or office from anywhere. With crisp night vision, two-way audio, and motion detection alerts, you can keep an eye on things 24/7. It's easy to set up with the TP-Link VIGI app and works with Alexa and Google Assistant for voice control.

Quick Start Guide

*Images may dier from actual products.

Appearance

Power Supply Interface

Status LED

White LED

RJ45 Network Interface

Infrared LED

Built-in Microphone

Package Contents

Network Camera

Waterproof Cable

Attachments

Quick Start Guide

Quick

Start

Guide

Option 1: Wall/Ceiling Mounting

1. Stick the mounting template to the desired mounting place. Drill 4 screw holes

according to the template.

2. Insert the anchors into the holes, use the provided screws to x the camera’s

bracket to the wall or ceiling.

Installing Waterproof Cable Attachments

Wall Mounting

Install the waterproof cable attachments for the network interface when the

camera is installed outdoors.

Note: Make sure each part is securely attached and the waterproof rings are ush to keep out water.

1. Route the network cable through the following components in order: x nut,

waterproof ring, and then the waterproof jacket.

2. Fix the O-ring to the network interface of the camera and connect the network

cables.

3. Attach the network interface with the waterproof jacket, then twist to lock.

4. Insert the waterproof ring into the waterproof jacket. Rotate the x nut to

secure it to the waterproof jacket.

Mount Camera

Fix Nut Waterproof

Ring

O-ring Network

Interface

Waterproof

Jacket

Mounting Template

Anchor

Self-tapping Screw

Anchor

Self-tapping Screw

Mounting Template

Option 2: Pole Mounting

1. Thread each of the two cable ties through the slits on the back of the camera’s

bracket indicated below.

2. Slip the two cable ties through the pole. Tighten them to rmly attach the pole.

Cable Tie

Status LED Indication

Note: Make sure that the wall is strong enough to withstand 3 times the

weight of the camera and mounting bracket .

7 Speaker

8microSD Card Slot

Insert a microSD card for local storage. Initialize the SD card via VIGI app or other

management tools before recording videos.

9Reset Button

Long press the button to reset the camera to factory settings.

Note: Before inserting the micro SD card or resetting

the camera, rotate the sphere and unfasten the two

xed screws to remove the cover.

Mounting Template

Anchors x 4 Screws x 4

VIGI Wi-Fi Network Camera

Status Description

Solid red Starting up

Blink red and green Ready for setup

Blink green slowly Connecting to Wi-Fi

Solid green Connected to Wi-Fi

Blink red slowly Wi-Fi connection lost

Blink red quickly Camera resetting

Blink green quickly Camera updating

Install the waterproof seal for the power connectors when the camera is installed

outdoors.

Install Waterproof Seal for Power Connectors

Male Power Connector Waterproof Seal Female Power Connector

Waterproof Seal

Power Adapter

Φ6 mm Φ3.5 mm

When installing with anchors

Φ = 6 mm (15/64 in)

When installing with screws only

Φ = 3 mm (1/8 in.)

Appropriate drilling size (Φ)

For technical support, the user guide and other information, please visit

https://www.tp-link.com/support, or simply scan the QR code.

1. Download the VIGI Security Manager on your

computer at

https://www.tp-link.com/support/download/vigi-se

curity-manager/.

2. Install the VIGI Security Manager and open it.

3. Cameras on the same network as your computer

can be automatically discovered. Go to Settings >

Discovered Devices, click + Add to activate your

discovered cameras by setting passwords, and

follow the instructions to add your cameras.

Method 2: Via the VIGI Security Manager

(Windows only)

You can also access and manage your cameras via any of the methods below.

View live video and modify camera settings on

your computer.

Method 1: Use the camera with

your VIGI NVR

Before you start, make sure the NVR is working

properly.

1. Right click on the Live View screen and click Add

Camera.

2. Select your camera and click + to add your camera

directly. If you have disabled Plug and Play on your

NVR, create a password or use a preset password

for your camera.

If you are using your cameras with other NVR brands,

refer to the NVR’s User Manual to add cameras.

Method 3: Via a Web Browser

View live video and modify camera settings via a

web browser.

1. Find the camera's IP address on your router’s client

page.

2. On your local computer, open a web browser and enter

https://camera's IP address (https://192.168.0.60 by

default).

3. Select your Country/Region and Time Zone.

4. Set a password to activate the camera.

Done. You can view the live video on the Preview page, and

go to the Settings page to change camera settings.

More Management Methods

Set Up Camera

Here is a typical network topology. The camera works with an NVR for easier batch access and management.

Frequently Asked Questions (FAQ)

Q1: What can I do if I fail to congure my camera?

• Check if the camera is powered on properly.

• Make sure you have a 2.4 GHz wireless network for camera connection.

• Make sure your camera and NVR/computer/Phone are in the same subnet. If not,

use TP-Link VIGI app to add your camera to the same network wirelessly or

connect your camera to the same network via an Ethernet cable.

• For other NVR brands, make sure you have activated the camera by setting a

password via the VIGI Security Manager, TP-Link VIGI app or web management

page.

Q2: How do I reset the camera?

• Rotate the sphere and unfasten the two xed screws to remove the cover. Long

press the reset button until the Status LED starts blinking red quickly.

Q3: What should I do if I forgot the password of the camera?

• You can check the password of the camera via VIGI NVR, VIGI Security Manager or its

web management page. For more details, refer to the corresponding user guides.

• You can reset the camera and activate it again. During the activation process, you can

set a new password.

Q4: What should I do if the SD card is not working properly?

• Make sure you are using a microSD card.

• Unplug the SD card and insert it again. Make sure you have inserted the SD card

correctly.

• It’s recommended to use a Class 10 microSD card or higher, with storage from 8 GB to

256 GB.

• Make sure you have initialized the microSD card via the VIGI Security Manager,

TP-Link VIGI app or web management page .

• If the problem still persists, contact our technical support.

• Do not use any other chargers than those recommended.

• Do not use the device where wireless devices are not allowed.

• Do not use damaged charger or USB cable to charge the device.

• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.

• Adapter shall be installed near the equipment and shall be easily accessible.

• Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.

• The power adapter must be used indoors. Make sure that the temperature of the power adapter is

within 0-40°C.

TP-Link hereby declares that the device is in compliance with the essential requirements and other

relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.

The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/

TP-Link hereby declares that the device is in compliance with the essential requirements and other

relevant provisions of the Radio Equipment Regulations 2017.

The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca/

Step 2. Power On the Camera

Connect the camera to the power socket via the provided power adapter, and

wait until the LED blinks red and green.

Step 1. Download the TP-Link VIGI App

Get the TP-Link VIGI App from the Apple App Store or Google Play.

Step 3. Set Up

1. Open the TP-Link VIGI app and log in with your TP-Link ID. If you don’t have an

account, sign up rst.

2. Tap the + button on the top right and follow the app instructions to activate and

add your cameras.

Note: If you want to use the NVR for easier batch access and management later,

add the camera to the same network as the NVR.

Done! You can now remotely view live video, manage cameras, and

get instant alerts.

For more questions, please refer to https://www.tp-link.com/support/faq/2850/

VIGI NVR

NVRNetwork Device

(e.g., Switch or Router)

Wi-Fi Camera

Access Point

Wi-Fi Camera

Smartphone

VIGI

Note: For more detailed instructions, refer to the user guides at https://www.tp-link.com/support/

TP-LINK tp-link VIGI Wi-Fi Network Camera User guide

TP-LINK tp-link VIGI Wi-Fi Network Camera User guide

TP-LINK tp-link VIGI Wi-Fi Network Camera User guide

Related papers

Other documents