2. Belluscura
  3. 8932
8932

Belluscura 8932 User manual

  • Hello, I'm your AI assistant. I've reviewed the user manual for the X-PLOR portable oxygen concentrator. This document provides detailed instructions on how to place the device in a backpack, thread the cannula, and wear it correctly. I'm ready to answer your questions about using the X-PLOR and its backpack integration.
  • How should the X-PLOR be placed in the backpack?
    Where should the cannula be threaded?
    How should the cannula be worn?
Placing X-PLOR in Backpack.
Backpack Instructions
PART 1
Disconnect the cannula and remove
the X-PLOR from the
small carrying bag, if applicable.
Pull on ring to open the front pocket, so
you can place the X-PLOR inside.
(Be sure that the LCD screen is facing up, the
cannula connector is located on the right side, and
the intake vent aligns with the mesh panel.)
Continue threading the cannula down
through the backpack, toward the X-PLOR.
(Pull the cannula out through the grommet so it can
connect to the X-PLOR.)
Place backpack on a at
surface with the front pocket
and ring facing up.
Insert and thread the cannula
through the opening at the top
of the right shoulder strap.
Connect the cannula
to the X-PLOR.
Turn sheet over to continue to part 2.
11
33
55
22
44
66
By: XPLOROxygen.com
Wearing the Backpack.
Backpack Instructions
PART 2
Place backpack on shoulders
and adjust the shoulder straps so
the backpack is comfortable.
Roll the cannula tubing to the desired
length. Secure the excess tubing inside
the backpack with the Velcro straps,
making sure not to kink the tubing.
Wrap the cannula up and over
both ears and insert the nasal
prongs into your nostrils.
(The cannula should t comfortably
around your head.)
Zip up the backpack and you’re
ready to go X-PLOR.
77
99
88
1010
Store additional batteries inside the
backpack if desired.
LBL 5025-03 ©2022 Belluscura LLC. All Rights Reserved.
By: XPLOROxygen.com
March 2022
/