DATA SHEET
Convection Speed Oven with Trim Kit
DATE: 25.11.2019
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
DATUM :
BOTTOM OF CHASSIS
DATUM : FRONT OF CHASSIS
PLAN VIEW
DATUM :
FRONT OF CHASSIS
VENTILATION
PROFILE VIEW
FRONT VIEW
Model no:
OM24NDB1 with TK30NDB1, OM24NDBB1 with TK30NDBB1
(refer page 2 for metric measurements)
Product Dimensions
inches
a Overall height of oven and trim
18 1/16"
B Overall width of oven and trim
29 1/16"
c Overall depth of oven and trim (excludes handle and front
metal trim)
22 1/2"
D Depth of oven frame and trim surround (excludes handle and
front metal trim)
1 5/8"
E Depth of oven chassis and trim brackets
20 7/8"
F Height of oven chassis and trim brackets
18 1/16"
G Width of oven chassis
21 7/8"
H Width of oven
2 1/2"
I Height from bottom datum to top of oven door
14 7/16"
J Height of control panel
15/16"
K Height of metal cap on control panel
1/16"
L Height from bottom datum to centreline of handle
1 1/2"
M Width of handle
22 1/4"
N Depth of handle (measured from front of door)
1 5/8"
O Thickness of handle
5/8"
P Distance from bottom datum to top of trim grille
1/16"
Q Depth of door when opened (measured from front of door)
12 5/8"
R Height of trim support brackets
1/16"
Minimum Clearances
inches
Minimum inside height of cavity (proud installation)
18 1/2"
Minimum inside depth of cavity (proud installation)
22 1/16"
Minimum inside width of cavity
22 1/16"
Overall height of cabinetry (cavity around trim surround)
18 15/16"
Overall width of cabinetry (cavity around trim surround)
0"
Minimum inside depth of cavity (flush installation)
2 5/8"
Rear ventilation air vent depth*
2"
Rear ventilation air vent width*
22 1/16"
*A rear ventilation air vent totalling 4.4in is required. The air vent must be
located at the rear of cabinet, it can be positioned at the base, sides, back or
top of the cavity.
IMPORTANT NOTE: For full installation and clearance details please refer to
our installation manual.
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CABINETRY CLEARANCES --------------------------------
A
H
C
D
E
F
G
I
I
J
K
L
M
N
o
p
p
18 1/16"
20 7/8"
B29 1/16"
R
POWER OUTLET
LOCATION
NOT TO SCALE
TK30NDB1, TK30NDBB1
TRIM KIT
OM24NDB1, OM24NDBB1
MICROWAVE OVEN
DATA SHEET
Convection Speed Oven with Trim Kit
DATE: 25.11.2019
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
DATUM :
BOTTOM OF CHASSIS
DATUM : FRONT OF CHASSIS
PLAN VIEW
DATUM :
FRONT OF CHASSIS
VENTILATION
PROFILE VIEW
FRONT VIEW
NOT TO SCALE
Model no:
OM24NDB1 with TK30NDB1, OM24NDBB1 with TK30NDBB1
(refer page 1 for imperial measurements)
Product Dimensions
mm
a Overall height of oven and trim
478
B Overall width of oven and trim
757
c Overall depth of oven and trim (excludes handle and front
metal trim)
572
D Depth of oven frame and trim surround (excludes handle and
front metal trim)
42
E Depth of oven chassis and trim brackets
50
F Height of oven chassis and trim brackets
460
G Width of oven chassis
556
H Width of oven
596
I Height from bottom datum to top of oven door
67
J Height of control panel
100
K Height of metal cap on control panel
20
L Height from bottom datum to centreline of handle
44
M Width of handle
565
N Depth of handle (measured from front of door)
42
O Thickness of handle
16
P Distance from bottom datum to top of trim grille
20
Q Depth of door when opened (measured from front of door)
20
R Height of trim support brackets
20
Minimum Clearances
mm
Minimum inside height of cavity (proud installation)
470
Minimum inside depth of cavity (proud installation)
560
Minimum inside width of cavity
560
Overall height of cabinetry (cavity around trim surround)
480
Overall width of cabinetry (cavity around trim surround)
761
Minimum inside depth of cavity (flush installation)
600
Rear ventilation air vent depth*
50
Rear ventilation air vent width*
560
*A rear ventilation air vent totalling 280cm is required. The air vent must be
located at the rear of cabinet, it can be positioned at the base, sides, back or
top of the cavity.
IMPORTANT NOTE: For full installation and clearance details please refer to
our installation manual.
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CABINETRY CLEARANCES --------------------------------
A
H
C
D
E
F
G
I
J
K
L
M
N
O
P
Q
p
478
530
B757
R
POWER OUTLET
LOCATION
TK30NDB1, TK30NDBB1
TRIM KIT
OM24NDB1, OM24NDBB1
MICROWAVE OVEN
-
1
-
2
Fisher & Paykel OM24NDBB1 24-Inch Convection Speed Oven User guide
- Type
- User guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Fisher & Paykel OM60NDBB1 User guide
-
Fisher & Paykel OM24NDBB1 User guide
-
Fisher & Paykel OB60SDPTB1 Self-Cleaning Oven User guide
-
Fisher & Paykel OS76NPX1 Combination Steam Oven, 76cm, 9 Function User guide
-
Fisher & Paykel OB60SDPTDB1 User guide
-
Fisher & Paykel OS60SDTDX1 User guide
-
Fisher & Paykel OS24NDBB1 User guide
-
-
Fisher and Paykel OB60SD9PB1 Self-Cleaning Oven User guide
-