Jibe JCL102 recessed downlight features a slim and compact design, suitable for narrow ceiling installations. Its IP65-rated front cover makes it ideal for damp environments. With traditional diamond plaited surface lens design, it ensures high light transmittance and uniform lighting output. T-shape heat sink increases radiation area, improving cooling efficiency. The fitting can be rotated horizontally from 0 to 30 degrees, expanding the illumination area.
Jibe JCL102 recessed downlight features a slim and compact design, suitable for narrow ceiling installations. Its IP65-rated front cover makes it ideal for damp environments. With traditional diamond plaited surface lens design, it ensures high light transmittance and uniform lighting output. T-shape heat sink increases radiation area, improving cooling efficiency. The fitting can be rotated horizontally from 0 to 30 degrees, expanding the illumination area.
Technical Application Guide
Jibe LED Downlight JCL102
JCL102 LED recessed downlight adopts
super slim and compact design, perfectly
suitable for the narrow ceiling installation. IP65
rating front cover design, suitable for damp
environment. Traditional diamond plaited
surface lens design ensures the high light
transmittance and uniform lighting
output. T-shape heat sink greatly increases
the radiation area and improves cooling
efficiency. The fitting could be rotated from
0 to 30 degree in horizontal direction,
which can expand the illumination area.
• Up to 70% energy saving compared to
standard CFL
• Long lifetime of 40,000 hours
• Triac dim, 0-10V dim, DALI dim
• 36°/60° wide beam angle
• Ø68-72mm cutout
• CCT: 2700K 3000K
4000K 5000K
• No UV/IR light
• Environment friendly, without Mercury or any
other hazardous substances
Application notes
• Professional electrician for installation only
• Switch off before installation
• Do not touch when in use
• Keep away from hot steam and corrosive gas
Application Areas
It is designed for general lighting applications
in office, supermarket, shop, school, hotel, etc.
It is also widely used for public areas, such as
stairway, lobby, reception, corridors etc.
Certificate
Introduction
www.jibe.lighting [email protected]
30°
SAA
Product Information
Technical Specifications
Model Voltage Power Power
Factor
Lumen
(±5%)
Beam
angle CCT Lifespan CRI Dimmable Dimension
JCL102A-2.5-5W AC230V 5W ≥0.9 465 36°/60° 2700K 40000h ≥80 No Ø80*30mm cutout Ø68-72mm
JCL102A-2.5-5W AC230V 5W ≥0.9 480 36°/60° 3000K 40000h ≥80 No Ø80*30mm cutout Ø68-72mm
JCL102A-2.5-5W AC230V 5W ≥0.9 530 36°/60° 4000K 40000h ≥80 No Ø80*30mm cutout Ø68-72mm
JCL102A-2.5-5W AC230V 5W ≥0.9 530 36°/60° 5000K 40000h ≥80 No Ø80*30mm cutout Ø68-72mm
JCL102A-2.5-5W-D AC230V 5W ≥0.9 460 36°/60° 2700K 40000h ≥80 Yes Ø80*30mm cutout Ø68-72mm
JCL102A-2.5-5W-D AC230V 5W ≥0.9 475 36°/60° 3000K 40000h ≥80 Yes Ø80*30mm cutout Ø68-72mm
JCL102A-2.5-5W-D AC230V 5W ≥0.9 525 36°/60° 4000K 40000h ≥80 Yes Ø80*30mm cutout Ø68-72mm
JCL102A-2.5-5W-D AC230V 5W ≥0.9 520 36°/60° 5000K 40000h ≥80 Yes Ø80*30mm cutout Ø68-72mm
JCL102A-2.5-5W AC230V 5W ≥0.9 345 36°/60° 2700K 40000h ≥90 No Ø80*30mm cutout Ø68-72mm
JCL102A-2.5-5W AC230V 5W ≥0.9 370 36°/60° 3000K 40000h ≥90 No Ø80*30mm cutout Ø68-72mm
JCL102A-2.5-5W AC230V 5W ≥0.9 410 36°/60° 4000K 40000h ≥90 No Ø80*30mm cutout Ø68-72mm
JCL102A-2.5-5W AC230V 5W ≥0.9 380 36°/60° 5000K 40000h ≥90 No Ø80*30mm cutout Ø68-72mm
JCL102A-2.5-5W-D AC230V 5W ≥0.9 345 36°/60° 2700K 40000h ≥90 Yes Ø80*30mm cutout Ø68-72mm
JCL102A-2.5-5W-D AC230V 5W ≥0.9 365 36°/60° 3000K 40000h ≥90 Yes Ø80*30mm cutout Ø68-72mm
JCL102A-2.5-5W-D AC230V 5W ≥0.9 400 36°/60° 4000K 40000h ≥90 Yes Ø80*30mm cutout Ø68-72mm
JCL102A-2.5-5W-D AC230V 5W ≥0.9 375 36°/60° 5000K 40000h ≥90 Yes Ø80*30mm cutout Ø68-72mm
www.jibe.lighting [email protected]
Driver data Sheet
Fixture Compatibility
Rated
Wattage
Electrical
Classification
Ingress
Protection
Operating
Temp
Operating
Humidity
Storage
Temp
5W ⅡIP65 -20oC~45oC0~90% -20oC~65oC
Driver data DIM Non dim
Input rated Voltage AC230V AC230V
Frequency 50Hz 50Hz
Input Voltage AC200-240V AC200-240V
Efficiency ≥78% ≥78%
Total load Wattage 5W±0.5W 5W±0.5W
Power Factor ≥0.9 ≥0.9
Rated input current ≤0.028A ≤0.03A
Full load output Voltage DC28-38V DC28-40V
Rated output current 130mA 130mA
Output current range 130mA±5% 130mA±5%
Power tolerance ±5% ±5%
Current output tolerance ±5% ±5%
Dimming range 8%-100% —
Dimmer Triac dimmers —
Short circuit protection PASS PASS
Over voltage protection PASS PASS
Over temperature protection PASS PASS
THD ≤20% –
Withstand voltage AC3750V AC3750V
Ø80
30
66
Photometric Diagram
Polar intensity diagram Beam diagramCartesian intensity diagram
UNIT: cd
AVERAGE BEAM ANGLE(50%): 38.2 DEG
-/+180
-120
-90
-30
120
90
30
0
300
600
900
1200
1500
0
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)
15.0
13.5
12.0
10.5
9.0
7.5
6.0
4.5
3.0
1.5
0
C0/180
C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25 Height Eavg, Emax Angle: 38.01deg Diameter
Note: The Curves indicate the illuminated area and the average
illumination when the Luminaire is at different distance.
Flux out: 273.9 lm
5000K
Polar intensity diagram Cartesian intensity diagram Beam diagram
Height Eavg, Emax Angle: 37.35deg Diameter
Note: The Curves indicate the illuminated area and the average
illumination when the Luminaire is at different distance.
Flux out: 255.0 lm
UNIT: cd
AVERAGE BEAM ANGLE(50%): 37.6 DEG
-/+180
-120
-90
-30
120
90
30
0
300
600
900
1200
1500
0
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)
15.0
13.5
12.0
10.5
9.0
7.5
6.0
4.5
3.0
1.5
0
C0/180
C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25
3000K
Polar intensity diagram Beam diagramCartesian intensity diagram
UNIT: cd
AVERAGE BEAM ANGLE(50%): 37.7 DEG
-/+180
-120
-90
-30
120
90
30
0
200
400
600
800
1000
0
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)
10
9
8
7
6
5
4
3
2
1
0
C0/180
C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25 Height Eavg, Emax Angle: 37.63deg Diameter
Note: The Curves indicate the illuminated area and the average
illumination when the Luminaire is at different distance.
Flux out: 239.5 lm
Polar intensity diagram Cartesian intensity diagram
UNIT: cd
AVERAGE BEAM ANGLE(50%): 38.3 DEG
-/+180
-120
-90
-30
120
90
30
0
300
600
900
1200
1500
0
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)
15.0
13.5
12.0
10.5
9.0
7.5
6.0
4.5
3.0
1.5
0
C0/180
C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25
Beam diagram
Height Eavg, Emax Angle: 38.08deg Diameter
Note: The Curves indicate the illuminated area and the average
illumination when the Luminaire is at different distance.
Flux out: 311.0 lm
Spectral Distribution
2700K
380 500 600 700 800
Wavelength(nm)
Max=3884 [1.0=20000]
Spectrum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
380 500 600 700 800
Wavelength(nm)
Max=3864 [1.0=20000]
Spectrum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
380 500 600 700 800
Wavelength(nm)
Max=4036 [1.0=20000]
Spectrum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
380 500 600 700 800
Wavelength(nm)
Max=4604 [1.0=20000]
Spectrum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
3000K
4000K 5000K
2.28 SDCM F3000K
x=0.4409 y=0.4079
4.93 SDCM F2700K
x=0.4665 y=0.4137
www.jibe.lighting [email protected]
3.64 SDCM F4000K
x=0.3942 y=0.3907
2.18 SDCM F5000K
x=0.3575 y=0.3721
2700K
4000K
80
70
60
50
40
30
20
10
0
18:37:46
19:07:44
19:37:44
20:07:44
20:37:44
21:07:44
21:37:44
22:07:44
23:07:44
23:37:44
0:07:44
0:37:44
1:07:44
1:37:44
2:07:44
2:37:44
3:07:44
3:37:44
4:07:44
4:37:44
5:07:44
5:37:44
6:07:44
6:37:44
7:07:44
7:37:44
8:07:44
8:37:44
9:07:44
IC
Capacitor
MOS
PCB
LED
Fitting
Environmental temperature
Temperature (oC)
Time
The driver lifespan is based on capacitor working temperature.
Driver lifetime & LED light decay rate
90000
80000
70000
60000
50000
40000
30000
20000
10000
0
65oC75oC85oC95oC 105oC
Lifetime (hours)
Capacitor Tc (oC)
Driver Lifetime
% Luminous Flux
FLUX
△U'V'
110%
105%
100%
95%
90%
85%
80%
75%
70%
0.0040
0.0035
0.0030
0.0025
0.0020
0.0015
0.0010
0.0005
0.0000
0 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000
LifeTime (hours)
Polar Diagram Comparison
AVERAGE BEAM ANGLE (50%): 37.6DEG
300
600
900
1200
1500
0O
-/+180O
150O
-150O
120O
-120O
90O
-90O
60O
-60O
30O
-30O
UNIT: cd
C0/180, 37.9 deg
C30/210, 37.6 deg
C60/240, 37.4 deg
C90/270, 37.3 deg
0
LED Light Decay Rate
Temperature
●The testing is operated at 25°C
●The lifetime of capacitor, minimum of 5,000 hours if operated at 105°C, will be doubled whenever the temperature drops 10°C
●The highest withstand temperature of IC, MOS could be 120°C
●The highest withstand temperature of LED junction temperature is 150°C
www.jibe.lighting [email protected]
Packaging Information
SIZE(CM) N.W/pc
(KGS) G.W.(KGS) Q'TY(PCS)
Carton 52.5*52.5*15 0.24 15 50
CTNS Q'TY(PCS) VOLUME(CBM)
20'' standard
container 660 33000 28
40'' standard
container 1320 66000 56
www.jibe.lighting [email protected]
Installation
Install requirements
A-gap above the fitting 25mm
B-gap to the building material 25mm
C-gap to the thermal insulation 50mm
1. Open a hole according to the
cutout size of led downlight.
2. Use screw-driver to
open the driver terminal
cover, feed the main AC
wire L. N. in terminal
block respectively, then
fix the cover back.
3. Connect the downlight
with driver, hold back the
spring clip then push the
downlight into the hole.
4. Make sure the downlight fixed
tightly in ceiling, turn on the
power (Fig 1).
C
Power supply
AB
© 2019 Jibe Lighting - all rights reserved
Jibe reserves the right to alter material, dimensions and
characteristics without prior notice.
Read installation instructions carefully. Technical information
on the installation instruction has precedence over the
information in the brochure.
Our general terms and conditions shall apply notwithstanding
any stipulation to the contrary to all the orders and
agreements with Jibe.
You can obtain a copy of these conditions on demand.
For latest information and specifications of the full product
range
visit www.jibe.lighting
JIBE LIGHTING — HEADQUARTERS
Hogebrinkerweg 14V – 3871 KN Hoevelaken
Netherlands Tel: +31 (0)33 844 7111
-
1
-
2
-
3
-
4
-
5
-
6
-
7
Jibe JCL102 recessed downlight features a slim and compact design, suitable for narrow ceiling installations. Its IP65-rated front cover makes it ideal for damp environments. With traditional diamond plaited surface lens design, it ensures high light transmittance and uniform lighting output. T-shape heat sink increases radiation area, improving cooling efficiency. The fitting can be rotated horizontally from 0 to 30 degrees, expanding the illumination area.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
FX Luminaire MO-3LED-SQ-FB Installation guide
-
Planmeca ProMax 3D Mid User manual
-
-
-
Alfa Laval Pressure transmitter Operating instructions
-
SORG Boogie Drive Operating instructions
-
-
NAMRON Alfa User manual
-
havit HV1107MR16T User manual
-
PORTOR PT-CDL2-6I-5C3P 6 Inch LED Retrofit Recessed Commercial Grade Downlight User manual
