2. ABH MANUFACTURING INC
  3. PTR105SC
PTR105SC

ABH MANUFACTURING INC PTR105SC Installation guide

  • Hello! I've reviewed the installation template instructions for the ABH PTR105SC. This document provides guidance on installing the swing clear hinges, which includes information on wiring, cut-out dimensions, and appropriate screw usage. I'm ready to answer any questions you might have about the installation process or the device itself.
  • What type of wires should be used with this device?
    What is the maximum thickness of wire bundles that the spring conduit can accommodate?
    What is the minimum depth of the rectangular cut-out?
    What is the voltage range for this device?
ISSUED 11-08-21
c 2021 ABH Mfg., Inc.
printed in USA
www.abhmfg.com
E-mail: [email protected]
Architectural Builders Hardware Mfg., Inc.
1222 Ardmore Ave., Itasca, IL 60143
630.875.9900; FAX 800.9FAXABH (932.9224)
NOTES:
1. USE TRANSFER CASE HOUSING AS
DRILLING TEMPLATE.
2. ONLY STRANDED WIRES TO BE EMPLOYED.
3. SPRING CONDUIT FITS WIRE BUNDLES UP TO
5/16" THICK.
4. USE CARE WHEN INSERTING WIRES THROUGH
THIS DEVICE.
5. RECTANGULAR CUT-OUT IS 11/16" DEEP (MIN.)
FOR WOOD FRAME & DOOR.
6. WIRES SHOULD BE LABELED.
7. SIZE AND NUMBER OF WIRES MUST COMPLY
WITH THE NATIONAL ELECTRICAL CODE, NFPA,
AND LOCAL ELECTRICAL CODES.
8. THIS DEVICE IS INTENDED FOR LOW VOLTAGE
USE ONLY (30 VAC, 42.5 VDC, 10 WATTS MAX.)
PAGE 1 OF 1
PTR105SC INSTALLATION TEMPLATE
WITH SWING CLEAR HINGES - 90 DEGREES
PTR105SC
PTR105SC TEMPLATE-03.DWG
1.0
0.70
.125 DIA.
(4PL)
FROM
10.28
10.88
SOURCE
POWER
DOOR C
L
HARDWARE
TO
ELECTRIC
FRAME DOOR
1.0
1.500
1.500
10.88
10.28
11.438
0.50 RAD.
8-32 X 3/8" PHILLIPS FLAT HEAD
UNDERCUT MACHINE SCREW
QTY
DOOR
FRAME #8 X 3/4" PH. FLAT HEAD SHEET
METAL SCREW
4
4
SCREW DETAIL
/