Smappee EV Wall Single Phase Edition Installation guide

EV Wall Single Phase Edition
Brand
Smappee
Model
EV Wall Single Phase Edition
Type
Installation guide

Smappee EV Wall Single Phase Edition is a smart charging station for electric vehicles that allows you to charge your car quickly and efficiently. It features real-time monitoring of your energy consumption and charging progress, so you can always stay in control. The EV Wall also integrates with the Smappee App, giving you access to a range of smart features such as scheduling charging sessions, setting charging limits, and tracking your energy usage. With its sleek design and easy installation, the Smappee EV Wall is the perfect solution for charging your electric vehicle at home.

Smappee EV Wall Single Phase Edition is a smart charging station for electric vehicles that allows you to charge your car quickly and efficiently. It features real-time monitoring of your energy consumption and charging progress, so you can always stay in control. The EV Wall also integrates with the Smappee App, giving you access to a range of smart features such as scheduling charging sessions, setting charging limits, and tracking your energy usage. With its sleek design and easy installation, the Smappee EV Wall is the perfect solution for charging your electric vehicle at home.

Smappee EV Wall
Single Phase Edition
Quick Install Guide
What’s in the box?
EV Wall EV Wall mounting plate
DIN mounting
plate
RJ10 cable
40 cm
RJ10 cable
150 cm
Wall mounting
plate
CT Hub
EV Wall
splitter
Connect
CT 50A
×3
Screw & plug Small screw
×3 ×3
Bus termination
plug
Please don’t litter. Responsible publisher: Stefan Grosjean © Smappee nv - Evolis 104 -8530 Harelbeke, Belgium.
Smappee Quick Install Guide for Installers EV Wall Single Phase English_70-0160_2021/1
Safety warning
Carrying out electrical work within the home or workplace can be
dangerous and must be conducted according to the appropriate
national safety standards and executed by a certified electrician.
For safety purposes, it is also necessary to power off the
installation before proceeding with the physical installation.
For further safety instructions
and more detailed information,
please consult the full manual
via the QR code:
How to install Smappee EV Wall
1
Prepare the installation. Foresee a power supply &
communication cable between the EV Wall and the distribution
panel.
2 Fix the mounting plate to the wall with the provided plugs
and screws.
3 Attach the EV Wall housing to the EV Wall mounting plate
with the provided small screws.
4 Connect the power supply cable, communication cable
and charging cable (if applicable) to the EV Wall.
5 Connect the EV Wall modules as indicated in the diagram
shown overleaf. The Connect, the EV Wall splitter, the CT
Hub and Current Transformers (CTs) are installed inside the
distribution panel. These components communicate with the
charging station via the CAT 5/6 communication cable.
6 Connect the A and B cables and the communication cable
to the cover’s PCB. Then attach the front cover to the EV Wall
to close it. Switch on the power using the circuit breaker.
7 Download the Smappee App and follow the instructions
to configure your Smappee charging station.
8 Once Smappee Connect shows a green pulsing light,
validate the installation by verifying that the real-time bubbles
show correctly measured values in the Smappee App/
Dashboard.
9 Create a user account for the customer and share the
location with this new username. Write the username,
password and email address for the customer for future
reference. This user account can be used in the Smappee App
and Dashboard and to set smart charging schedules.
Smappee EV Wall
Single Phase
Connection
diagram
PE
N
L1
RCD
Contactor
Charge
Controller
Power
Box Lock
RCD
Contactor
Charge
Controller
Power
Box
PE
N
L1
CP
N
L1
Power
supply cable
Charging
cable
Fixed cable version Socket version
CAT 5/6
communication
cable
Power
supply
cable
A
B
B
LED Board
Front side Back side
Distribution Panel
  • Page 1 1
  • Page 2 2

Smappee EV Wall Single Phase Edition Installation guide

EV Wall Single Phase Edition
Brand
Smappee
Model
EV Wall Single Phase Edition
Type
Installation guide

Smappee EV Wall Single Phase Edition is a smart charging station for electric vehicles that allows you to charge your car quickly and efficiently. It features real-time monitoring of your energy consumption and charging progress, so you can always stay in control. The EV Wall also integrates with the Smappee App, giving you access to a range of smart features such as scheduling charging sessions, setting charging limits, and tracking your energy usage. With its sleek design and easy installation, the Smappee EV Wall is the perfect solution for charging your electric vehicle at home.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents