Lifetime 90176 Owner's manual

Lifetime
Brand
Lifetime
Model
90176
Type
Owner's manual

Lifetime 90176 is a basketball system designed for outdoor use. It features a sturdy, weather-resistant base that can be weighted with sand or water for added stability. The system is height-adjustable, so you can customize it to your needs. The included backboard is made of durable polycarbonate and is designed to withstand the elements. The Lifetime 90176 also comes with a nylon net and a weather-resistant cover to protect the system when it's not in use.

Lifetime 90176 is a basketball system designed for outdoor use. It features a sturdy, weather-resistant base that can be weighted with sand or water for added stability. The system is height-adjustable, so you can customize it to your needs. The included backboard is made of durable polycarbonate and is designed to withstand the elements. The Lifetime 90176 also comes with a nylon net and a weather-resistant cover to protect the system when it's not in use.

1
Keep this Product ID Number and use when contacting Customer Service:
OWNER’S MANUAL
MODEL N° 90176
COPY
2
Save this owner’s manual for future reference and in the event that
the manufacturer has to be contacted.
**U.S. and Canada customers ONLY**
IF ASSISTANCE IS NEEDED,
DO NOT CONTACT THE STORE!
CALL OUR CUSTOMER SERVICE DEPARTMENT at
1 (800) 225-3865
HOURS: 7:00 a.m. to 5:00 p.m. Monday through Friday (Mountain Standard Time)
**Call us or visit our Web site for Saturday hours**
Lifetime Products, Inc.
0/"OXs&REEPORT#ENTER"LDG$#LEARFIELD5TAH
**For customers outside the U.S. or Canada, please contact the store for assistance.**
REGISTER YOUR LIFETIME PRODUCT TODAY!
,)&%4)-%302/-)3%4/9/5
We invite you to read our privacy policy at www.lifetime.com
2%')34%2TODAY
4HEREAREBENElTSTOREGISTERINGYOUR,IFETIMEPRODUCT7ITHOURNEWONLINEPRODUCTREGISTRATIONFORM
ITSFASTANDEASY2EGISTERWITHUSATWWWLIFETIMECOMANDENJOYTHESEGREATBENElTS
s2ECEIVEEXCLUSIVEMONEYSAVINGOFFERSFROM"UY,IFETIMECOMOURONLINESTOREASWELL
as NEW product notifi cations and special closeout promotions!
s)NTHEUNLIKELYEVENTOFAPRODUCTRECALLORSAFETYMODIlCATIONWEWILLNOTIFYYOU
s2EGISTERINGYOURPRODUCTGUARANTEESYOUWARRANTYSERVICE)FYOUDONOTREGISTERYOUR
product, your warranty rights will not be diminished. But you will need to provide a sales
receipt to verify your product purchase date before warranty service will be provided.
Maintaining your privacy is our long-standing policy at Lifetime. And you can rest as-
sured that Lifetime will not sell or provide your personal data to other third parties, or
allow them to use your personal data for their own purposes.
INSTRUCTION #1079708 B 1/19/2011
COPY
3
Most injuries are caused by misuse and/or not following instructions. Use caution when using this product.
To ensure safety, do not attempt to assemble this product without reading and
following all instructions carefully. Check the entire box and inside all packing
materials for parts and/or additional instruction material. Before beginning assembly,
identify and inventory all parts and hardware using the parts and hardware lists and
identifi ers in this document. Proper and complete assembly, use and supervision
are essential for proper orientation and to reduce the risk of accident or injury. A
high probability of serious injury exists if this product is not installed, maintained,
and/or operated properly. Failure to comply with any of the warnings in this
instruction manual may result in serious personal injuries such as cuts, broken
bones, nerve damage, paralysis, brain injury, or death. Failure to comply may also
result in property damage. Please heed all warnings and cautions.
&!),52%4/&/,,/74(%3%7!2.).'3-!92%35,4).3%2)/53).*529/202/0%249
$!-!'%!.$7),,6/)$7!22!.49
s)FUSINGALADDERDURINGASSEMBLYUSEEXTREMECAUTION
s4WOCAPABLEADULTSARERECOMMENDEDFORTHISOPERATION
s#HECKBASEDAILYFORLEAKAGE,EAKSMAYCAUSEPRODUCTTOFALL
s!SSEMBLETHEPOLESECTIONSPROPERLY&AILURETODOSOCOULDCAUSETHEPOLE
sections to separate during play or transport.
SAFETY INSTRUCTIONS
BEFORE BEGINNING ASSEMBLY
Keep the hardware bags and their contents separate. If any parts
are missing, call our Customer Service Department.
Identify and inventory all parts and hardware using the parts and
hardware lists and identifi ers in this document.
Test fi t all Bolts by inserting them into their respective holes. If
necessary, carefully scrape away any excess powder coating
buildup from inside the holes. Do not scrape away all of the
powder coating. Bare metal may rust. You may need to pound
some Bolts into place with a hammer or mallet.
Most injuries are caused by misuse and/or not following instructions. Use caution when using this product.
To ensure safety, do not attempt to assemble this product without reading and
following all instructions carefully. Check the entire box and inside all packing
materials for parts and/or additional instruction material. Before beginning assembly,
identify and inventory all parts and hardware using the parts and hardware lists and
identifi ers in this document. Proper and complete assembly, use and supervision
are essential for proper orientation and to reduce the risk of accident or injury. A
high probability of serious injury exists if this product is not installed, maintained,
and/or operated properly. Failure to comply with any of the warnings in this
instruction manual may result in serious personal injuries such as cuts, broken
bones, nerve damage, paralysis, brain injury, or death. Failure to comply may also
result in property damage. Please heed all warnings and cautions.
&!),52%4/&/,,/74(%3%7!2.).'3-!92%35,4).3%2)/53).*529/202/0%249
$!-!'%!.$7),,6/)$7!22!.49
s)FUSINGALADDERDURINGASSEMBLYUSEEXTREMECAUTION
s4WOCAPABLEADULTSARERECOMMENDEDFORTHISOPERATION
s#HECKBASEDAILYFORLEAKAGE,EAKSMAYCAUSEPRODUCTTOFALL
s!SSEMBLETHEPOLESECTIONSPROPERLY&AILURETODOSOCOULDCAUSETHEPOLE
sections to separate during play or transport.
SAFETY INSTRUCTIONS
BEFORE BEGINNING ASSEMBLY
Keep the hardware bags and their contents separate. If any parts
are missing, call our Customer Service Department.
Identify and inventory all parts and hardware using the parts and
hardware lists and identifi ers in this document.
Test fi t all Bolts by inserting them into their respective holes. If
necessary, carefully scrape away any excess powder coating
buildup from inside the holes. Do not scrape away all of the
powder coating. Bare metal may rust. You may need to pound
some Bolts into place with a hammer or mallet.
TOOLS AND PARTS REQUIRED FOR THIS ASSEMBLY
*Two adults required to
complete assembly*
/NLYADULTSSHOULDSETUPTHEPRODUCT$ONOTALLOWCHILDREN
INTHESETUPAREAUNTILASSEMBLYISCOMPLETE
!DJUSTABLE7RENCH
Phillips Screwdriver
(1)
&UNNEL
(1)
v7RENCH
(2)
3CRAP7OOD
(1)
Sand
(375 lb)
(1)
Pliers
Rubber Mallet
(1)
v7RENCH
(2)
7ATER(OSE
(1)
(1)
v7RENCH
(2)
(1)
Electric Drill
v7RENCH
(2)
v!LLEN7RENCH
(2, included)
5
This area is located at the top,
left-hand corner of the page
and indicates which tools
and hardware are needed to
COMPLETETHEASSEMBLYSTEPS
on a page.
Note:
!
Refer to the following areas throughout the instructions
to assist in the assembly process:
4HISAREAISUSUALLYLOCATEDINTHE
bottom, left-hand corner of a step
and indicates that special attention
is needed to perform a particular
part of a step.
4HESEAREASAREUSUALLYLOCATEDIN
the bottom, right-hand corner of a
step and indicate that damage to
THEPRODUCTORSERIOUSINJURYMAY
occur if the caution or warning is
not heeded.
7!2.).'
ASSEMBLY GUIDES
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
CAUTION
6
PARTS LIST
ID Item Description Qty
!,( Top Pole 1
!,& Middle Pole 1
!,% Bottom Pole 1
AJK Right Backboard Bracket 1
AJJ ,EFT"ACKBOARD"RACKET 1
AJI Backboard 1
AJX Corner Frame Guard 2
AJQ Center Frame Guard 1
!,8 Rim 1
AKZ Net 1
!,$ Plastic Guard 1
!,, Pole Bracket 1
AKC Short Extension Arm 2
AKB ,ONG%XTENSION!RM 2
AKQ Inner Channel 1
!," Outer Tube 1
AJS Channel Stop 1
AKI Handle 1
AMN Trigger 1
AJY Spring 2
AJM Base 1
!,) Pole Brace 2
AMU Wheel 2
AJD 1/2” x 21 3/4” Axle 1
AJN Base Cap 1
!,- Pole Cap 1
!,. Pole Pad 1
AKP Height Sticker 1
AMT Warning Sticker (Applied to Middle Pole) 1
ID Item Description Qty
Pole Assembly Hardware (1068524)
ADS 1/4” x 3/4” Screw 2
ABZ Xv3ELF4APPING3CREW 2
AAF 3/8” Washer 2
ABB 3/8” Centerlock Nut 2
ABE 3/8” x 4” Hex Bolt 2
ABR 1/2” x 3.41” Spacer 2
CIH Domed Countersink Washer 2
Pole to Base Assembly Hardware (1080080)
BTS 1/4” Barrel Nut 1
AAE 5/16” x 1” Hex Bolt 2
AAO 5/16” Nylock Nut 2
HARDWARE LIST
7
HARDWARE LIST
ID Item Description Qty
Pole to Base Assembly Hardware (1080080), Continued
BZP 1/4” x 3 1/2” Shoulder Bolt 1
ABD 5/16” Washer 4
##, 3/16” Allen Wrench 2
Backboard & Rim Assembly Hardware (1045426)
AAS 1/4” x 2 3/4” Hex Bolt 2
ABS 1/2” x 2 5/16” Galvanized Spacer 2
ABC 5/16” x 1 1/4” Carriage Bolt 2
ACS .38” x 1” Steel Spacer 2
AAB 1/4” Centerlock Nut 2
AAJ v(EX4.UT 2
ABD 5/16” Washer 2
ABF 7/16” Rubber Washer 2
ABG 5/16” x 2 1/2” Tap Bolt 2
AOU v5"OLT 1
ABK 5/16” Nylock Flange Nut 6
AJW Compression Spring 2
AOW Spring Retainer Plate 1
AAV 5/16” Jam Nut 2
Backboard to Pole Assembly Hardware (1046466)
AAD 1/2” x 7 1/16” Hex Bolt 4
!", .69” x .59” Black Spacer 4
AAX 1/2” Centerlock Nut 4
ABN 1/2” x 1/8” Spacer 4
Handle Assembly Hardware (1046262)
APS ,OCK4AB 1
AEA #6 Washer 2
AAP #6 x 3/8” Phillips Screw 2
AQI Trigger Spring 1
ACY 1/4” x 1 1/2” Screw 2
AAC 5/16” x 1 3/4” Hex Bolt 1
AAN 5/16” Cap Nut 1
AAD 1/2” x 7 1/16” Hex Bolt 1
AAX 1/2” Centerlock Nut 1
ABO 1/2” x 1” Poly Spacer 2
AAZ 3/8” x 7” Hex Bolt 1
ABB 3/8” Centerlock Nut 1
Frame Guard Assembly Hardware (HH00700)
ADP Xv3ELF$RILLING3CREW 10
8
Parts shown at 10% of Actual Size
ALH (x1)
Top Pole
!,& (x1)
Middle Pole
ALE (x1)
Bottom Pole
PARTS IDENTIFIER
!** (x1)
,EFT"ACKBOARD"RACKET
!*+ (x1)
Right Backboard Bracket
38
”
43 ”
3/8
43 ”
3/8
27 5/8”
AKC (x2)
Short Extension Arm
ALI (x2)
Pole Brace
7ARNING3TICKER
30 1/16”
AKB (x2)
,ONG%XTENSION!RM
AKQ (x1)
Inner Channel
ALB (x1)
Outer Tube
21 3/4 ”
!*$ (x1)
1/2” x 21 3/4” Axle
!*8 (x2)
Corner Frame Guard
!*1 (x1)
Center Frame Guard
21 1/8”
9
AKZ (x1)
Net
!,8 (x1)
Rim
!*) (x1)
Backboard
!*- (x1)
Base
Parts shown at 5% of Actual Size
Parts shown at 10% of Actual Size
PARTS IDENTIFIER
ALN (x1)
Pole Pad
10
Parts shown at 25% of Actual Size
PARTS IDENTIFIER
AMU (x2)
Wheel
AKI (x1)
Handle
ALD (x1)
Plastic Guard
!*3 (x1)
Channel Stop
!*9 (x2)
Spring
ALM (x1)
Pole Cap
AMN (x1)
Trigger
!*. (x1)
Base Cap
ALL (x1)
Pole Bracket
AKP (x1)
Height Sticker
11
HARDWARE IDENTIFIER
0/,%!33%-",9(!2$7!2%
Hardware shown at Actual Size
0/,%4/"!3%!33%-",9(!2$7!2%
Hardware shown at Actual Size
ADS (x2)
1/4” x 3/4” Screw
ABZ (x2)
Xv3ELF4APPING
Screw
ABB (x2)
3/8” Centerlock Nut
!!& (x2)
3/8” Washer
ABE (x2)
3/8” x 4” Hex Bolt
ABR (x2)
1/2” x 3.41” Spacer
BTS (x1)
1/4” Barrel Nut
AAE (x2)
5/16” x 1” Hex Bolt
AAO (x2)
5/16” Nylock Nut
BZP (x1)
1/4” x 3 1/2” Shoulder Bolt
ABD (x4)
5/16” Washer
CCL (x2)
1/4” Allen Wrench
CIH (x2)
Domed Counter
sink Washer
"!#+"/!2$4/2)-!33%-",9(!2$7!2%
Hardware shown at Actual Size
AAS (x2)
1/4” x 2 3/4” Hex Bolt
ABC (x2)
5/16” x 1 1/4” Carriage Bolt
12
HARDWARE IDENTIFIER
AAB (x2)
1/4” Center
lock Nut
!"' (x2)
5/16” x 2 1/2” Tap Bolt
"!#+"/!2$4/2)-!33%-",9(!2$7!2%#/.4).5%$
Hardware shown at Actual Size
Hardware shown at 25% of Actual Size
!*7 (x2)
Compression Spring
AOU (x1)
v5"OLT
!/7 (x1)
Spring Retainer Plate
ABS (x2)
1/2” x 2 5/16” Galvanized Spacer
ACS (x2)
.38” x 1” Steel Spacer
!!* (x2)
v(EX4.UT
ABD (x2)
5/16” Washer
!"& (x2)
7/16” Rubber Washer
ABK (x6)
5/16” Nylock Flange Nut
AAV (x2)
5/16”Jam Nut
!!8 (x4)
1/2” Center
lock Nut
ABL (x4)
.69” x .59” Black Spacer
ABN (x4)
1/2” x 1/8” Spacer
"!#+"/!2$4/0/,%!33%-",9(!2$7!2%
Hardware shown at Actual Size
AAD (x4)
1/2” x 7 1/16” Hex Bolt
7 1/16”
(Not actual length)
13
HARDWARE IDENTIFIER
(!.$,%!33%-",9(!2$7!2%
Hardware shown at Actual Size
APS (x1)
,OCK4AB
AEA (x2)
#6 Washer
AAP (x2)
#6 x 3/8”
Phillips
Screw
AQI (x1)
Trigger Spring
ACY (x2)
1/4” x 1 1/2” Screw
AAC (x1)
5/16” x 1 3/4” Hex Bolt
AAN (x1)
5/16” Cap Nut
7”
(Not actual length)
!!8 (x1)
1/2” Centerlock Nut
ABO (x2)
1/2” x 1” Poly Spacer
ABB (x1)
3/8” Centerlock Nut
AAZ (x1)
3/8” x 7” Hex Bolt
&2!-%'5!2$!33%-",9(!2$7!2%
Hardware shown at Actual Size
ADP (x10)
Xv3ELF$RILLING3CREW
AAD (x1)
1/2” x 7 1/16” Hex Bolt
7 1/16”
(Not actual length)

POLE ASSEMBLY
HARDWARE REQUIRED
TOOLS REQUIRED
SEC
1
Phillips Screwdriver
Hardware shown at Actual Size
3CRAP7OOD
ADS (x2)
1/4” x 3/4” Screw
ABZ (x2)
Xv3ELF4APPING3CREW
ABB (x2)
3/8” Centerlock Nut
!!& (x2)
3/8” Washer
ABE (x2)
3/8” x 4” Hex Bolt
ABR (x2)
1/2” x 3.41” Spacer
v7RENCH(x2)
Electric Drill
CIH (x2)
Domed Countersink Washer
15
POLE ASSEMBLY
PARTS REQUIRED
TOOLS REQUIRED
SEC
1
Parts shown at 10% of Actual Size
Phillips Screwdriver
3CRAP7OOD
ALH (x1)
Top Pole
!,& (x1)
Middle Pole
ALE (x1)
Bottom Pole
43 ”
3/8
43 ”
3/8
27 5/8”
7ARNING3TICKER
ALL (x1)
Pole Bracket
Part shown at 25% of Actual Size
v7RENCH(x2)
Electric Drill
16
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
Insert the vXv(EX"OLTS!"% with the v7ASHERS!!& into the
-IDDLE0OLE!,& as shown. Then slide the vXv3PACERS!"2 onto
the Hex Bolts.
SEC
1.1
!,&
ABE
ABR
7ARNING
3TICKER
!!&
Large Holes
Small Holes
!!& (x2)
ABE (x2)
ABR (x2)
./4//,32%15)2%$&/24()30!'%
17
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
Place the 0OLE"RACKET!,, onto the vXv(EX"OLTS!"%, and attach
it to the -IDDLE0OLE!,& with the hardware shown.
SEC
1.2
!,&
ABB
ALL
ABE
9/16" (x2)
ABB (x2)
18
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
ADS (x1)
Align the hole in the Top Pole (ALH) with the slot in the -IDDLE0OLE!,& and
slide the Top Pole over the Middle Pole. Insert a vXv3CREW!$3
through the $OMED#OUNTERSINK7ASHER#)( and the small hole in the Top
Pole and into the slot in the Middle Pole as shown.
SEC
1.3
ALH
!,&
Note: The 1/4” x 3/4” Screw should be fl ush with the Pole, but
will spin freely once installed. Do not jam the Poles together
until instructed.
!
ADS
ALH
!,&
CIH (x1)
CIH
19
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
Align the hole in the -IDDLE0OLE!,& with the slot in the Bottom Pole (ALE) and
slide the Middle Pole over the Bottom Pole. Insert a vXv3CREW!$3
through the $OMED#OUNTERSINK7ASHER#)( and the small hole in the Middle
Pole and into the slot in the Bottom Pole as shown.
SEC

Note: The 1/4” x 3/4” Screw should be fl ush with the Pole, but
will spin freely once installed. Do not jam the Poles together
until instructed.
!
!,&
ALE
ADS (x1)
CIH (x1)
ADS
!,&
ALE
CIH
20
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
WARNING
The Poles must be seated together! Even if the Poles cover
the slots before seating, they must be struck on a hard
surface fi ve to six times! Failure to seat the Poles correctly
could allow the Poles to separate during use, which could
lead to serious personal injuries or property damage.
Note: Do not hit your feet with the Pole sections,
as serious injury could occur.
!
3CRAP7OOD
If the 4OPAND-IDDLE0OLES!,(!,& do not completely cover the slots on the
-IDDLEAND"OTTOM0OLES!,&!,% after seating, DO NOT COMPLETE ASSEMBLY.
Call our Customer Service Department.
In order to seat the Poles, strike each end of the Pole very hard fi ve to six
times on a piece of scrap wood or cardboard. This must be done even if
the Poles cover the slots before seating has occurred.
SEC
1.5
ATTENTION: THIS STEP CANNOT BE REVERSED!
./(!2$7!2%2%15)2%$&/24()30!'%
ALH
!,&
ALE
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Lifetime 90176 Owner's manual

Lifetime
Brand
Lifetime
Model
90176
Type
Owner's manual

Lifetime 90176 is a basketball system designed for outdoor use. It features a sturdy, weather-resistant base that can be weighted with sand or water for added stability. The system is height-adjustable, so you can customize it to your needs. The included backboard is made of durable polycarbonate and is designed to withstand the elements. The Lifetime 90176 also comes with a nylon net and a weather-resistant cover to protect the system when it's not in use.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents