Headbourne 8000 Installation guide

Brand
Headbourne
Model
8000
Type
Installation guide
19.88"
15.55"
72.83"
●
J
●
H
●
E
●
A
●
B
●
F
●
D
●
C
●
M
●
G
TOP RING - 6 pre-drilled holes in bottom only
POLE - Top Section
POLE - Lower Mid Section
LOWER RING - 4 pre-drilled holes in bottom only
UMBRELLA RING - 4 pre-drilled holes in top and bottom
POLE - Upper Mid Section
POLE - Bottom Section
COAT HOOKS
BASE SUPPORTS
BASE FEET
D
J
J
J J
A
H
H
H
H
H
H
H
E
G
F
M
WARNING: CHOKING HAZARD - Small Parts.
Not for children under 3 years.
SAFETY PRECAUTIONS:
This product may require some manual dexerity or basic mechanical ablity to assemble. No warranty of any kind, either express or implied,
is associated with this product. Use of the product is at the user’s risk. Failure to use this product in a safe and responsible manner or any
purpose other than intended could result in injury, damage to the product or other property. Children in the proximity of this product require
adult supervision. It is essential to read and follow all the instructions and warnings prior to assembly to assure correct and safe use and avoid
any damage or injury.
1
USE
A-1
H-6
L-6
3
USE
D-1
J-4
K-8
2
USE
E-1
L-6
STEP
STEP STEP
5
4
USE
F-1
G-1
L-8
M-4
STEP
STEP
• •
USE
A-1
H-6
L-6
USE
D-1
J-4
K-8
USE
E-1
L-6
STEP
STEP STEP
USE
F-1
G-1
L-8
STEP
STEP
Use six short screws (L) to
attach Coat Hooks (H) to pole
top (A)
Use six short screws (L) to
attach Coat Hooks (H) to top
ring (E)
Use eight short screws (L) to attach
Middle and Bottom Rings (F&G) to
Base Supports (J). Add Base Feet (M)
Use eight long screws (K) to
attach Base Supports (K) to
pole bottom (D).
Thread assembled pieces
from Step 1 and 2 onto
Upper Mid Section pole
piece (B). Thread Lower
Mid section pole to join.
Thread Bottom Pole (D)
onto combined parts
from previous steps.
Confirm all screws and
threaded stems are
secure. Coat rack is
ready for use.
Coat Rack Easy Assembly
Please Note: Before product assembly, confirm no parts are missing. Tools necessary for assembly are not provided.
Parts List
PART PCS Description
A
1 Pole Top Section
B
1 Pole Upper Mid Section
C
1 Pole Lower Mid Section
D
1 Pole Bottom Section
E
1 Top Ring
F
1 Umbrella Ring
G
1 Bottom Ring
H
6 Coat Hooks
J
4 Base Supports
K
8 Long Screws
L
20 Short Screws
M
4 Base Feet
Coat Rack
1.37"
0.98"
• •
  • Page 1 1
  • Page 2 2

Headbourne 8000 Installation guide

Brand
Headbourne
Model
8000
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents