Alienware Area-51 R4 and R5 User manual

Type
User manual
Alienware Area-51 R5
Service Manual
Regulatory Model: D03X
Regulatory Type: D03X002
Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of your product.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
© 2018 - 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its
subsidiaries. Other trademarks may be trademarks of their respective owners.
Rev. A01
Contents
1 Before working inside your computer.................................................................................................10
Before you begin ...............................................................................................................................................................10
Safety instructions...............................................................................................................................................................10
Recommended tools........................................................................................................................................................... 10
Screw list.............................................................................................................................................................................. 11
2 After working inside your computer...................................................................................................13
3 Technical overview...............................................................................................................................14
Inside view of your computer.............................................................................................................................................14
Right view...................................................................................................................................................................... 14
Left view........................................................................................................................................................................ 15
System-board components.................................................................................................................................................16
I/O-board components...................................................................................................................................................... 17
4 Lifting the computer............................................................................................................................18
Procedure............................................................................................................................................................................18
5 Removing the stability foot................................................................................................................. 19
Procedure............................................................................................................................................................................19
6 Replacing the stability foot................................................................................................................. 21
Procedure............................................................................................................................................................................21
7 Removing the side panels....................................................................................................................22
Procedure........................................................................................................................................................................... 22
8 Replacing the side panels....................................................................................................................23
Procedure........................................................................................................................................................................... 23
9 Removing the battery..........................................................................................................................24
Prerequisites....................................................................................................................................................................... 24
Procedure........................................................................................................................................................................... 24
10 Replacing the battery........................................................................................................................25
Procedure........................................................................................................................................................................... 25
Post-requisites....................................................................................................................................................................25
11 Removing the battery case................................................................................................................ 26
Prerequisites....................................................................................................................................................................... 26
Procedure........................................................................................................................................................................... 26
3
12 Replacing the battery case................................................................................................................ 27
Procedure........................................................................................................................................................................... 27
Post-requisites.................................................................................................................................................................... 27
13 Removing the hard drive................................................................................................................... 28
Prerequisites....................................................................................................................................................................... 28
Procedure........................................................................................................................................................................... 28
14 Replacing the hard drive................................................................................................................... 30
Procedure........................................................................................................................................................................... 30
Post-requisites....................................................................................................................................................................30
15 Removing the U.2 fan........................................................................................................................ 31
Prerequisites........................................................................................................................................................................31
Procedure............................................................................................................................................................................31
16 Replacing the U.2 fan........................................................................................................................ 32
Procedure........................................................................................................................................................................... 32
Post-requisites.................................................................................................................................................................... 32
17 Removing the right AlienFX side-panel connector..........................................................................33
Prerequisites........................................................................................................................................................................33
Procedure........................................................................................................................................................................... 33
18 Replacing the right AlienFX side-panel connector..........................................................................34
Procedure........................................................................................................................................................................... 34
Post-requisites.................................................................................................................................................................... 34
19 Removing the left AlienFX side-panel connector............................................................................ 35
Prerequisites....................................................................................................................................................................... 35
Procedure........................................................................................................................................................................... 35
20 Replacing the left AlienFX side-panel connector............................................................................37
Procedure............................................................................................................................................................................37
Post-requisites.................................................................................................................................................................... 37
21 Removing the I/O board...................................................................................................................38
Prerequisites....................................................................................................................................................................... 38
Procedure........................................................................................................................................................................... 38
22 Replacing the I/O board...................................................................................................................39
Post-requisites.................................................................................................................................................................... 39
23 Removing the drive-bay heat sensor cable...................................................................................... 40
Prerequisites.......................................................................................................................................................................40
4
Procedure...........................................................................................................................................................................40
24 Replacing the drive-bay heat sensor cable...................................................................................... 42
Procedure........................................................................................................................................................................... 42
Post-requisites....................................................................................................................................................................42
25 Removing the memory modules........................................................................................................43
Prerequisites....................................................................................................................................................................... 43
Procedure........................................................................................................................................................................... 43
26 Replacing the memory modules........................................................................................................44
Procedure........................................................................................................................................................................... 44
Post-requisites....................................................................................................................................................................44
27 Removing the graphics card............................................................................................................. 45
Prerequisites....................................................................................................................................................................... 45
Procedure........................................................................................................................................................................... 45
28 Replacing the graphics card............................................................................................................. 47
Procedure........................................................................................................................................................................... 47
Post-requisites.................................................................................................................................................................... 48
29 Removing multiple graphics cards................................................................................................... 49
Prerequisites....................................................................................................................................................................... 49
Procedure to remove two graphics card...........................................................................................................................49
Procedure to remove three graphics card........................................................................................................................ 50
30 Replacing multiple graphics cards....................................................................................................53
Procedure to replace three graphics card........................................................................................................................ 53
Procedure to replace two graphics card...........................................................................................................................54
Post-requisites....................................................................................................................................................................56
31 Removing the wireless card.............................................................................................................. 57
Prerequisites....................................................................................................................................................................... 57
Procedure........................................................................................................................................................................... 57
32 Replacing the wireless card.............................................................................................................. 58
Procedure........................................................................................................................................................................... 58
Post-requisites....................................................................................................................................................................58
33 Removing the coin-cell battery.........................................................................................................59
Prerequisites.......................................................................................................................................................................59
Procedure...........................................................................................................................................................................59
34 Replacing the coin-cell battery........................................................................................................ 60
Procedure...........................................................................................................................................................................60
Post-requisites....................................................................................................................................................................60
5
35 Removing the top fan........................................................................................................................ 61
Prerequisites........................................................................................................................................................................61
Procedure............................................................................................................................................................................61
36 Replacing the top fan........................................................................................................................62
Procedure........................................................................................................................................................................... 62
Post-requisites....................................................................................................................................................................62
37 Removing the logo board..................................................................................................................63
Prerequisites....................................................................................................................................................................... 63
Procedure........................................................................................................................................................................... 63
38 Replacing the logo board..................................................................................................................65
Procedure...........................................................................................................................................................................65
Post-requisites....................................................................................................................................................................65
39 Removing the solid-state drive.........................................................................................................66
Prerequisites....................................................................................................................................................................... 66
Procedure........................................................................................................................................................................... 66
40 Replacing the solid-state drive.........................................................................................................67
Procedure........................................................................................................................................................................... 67
Post-requisites.................................................................................................................................................................... 67
41 Removing the PCI fan....................................................................................................................... 68
Prerequisites....................................................................................................................................................................... 68
Procedure........................................................................................................................................................................... 68
42 Replacing the PCI fan....................................................................................................................... 69
Procedure........................................................................................................................................................................... 69
Post-requisites....................................................................................................................................................................69
43 Removing the front-bezel heat sensor cable................................................................................... 70
Prerequisites....................................................................................................................................................................... 70
Procedure........................................................................................................................................................................... 70
44 Replacing the front-bezel heat-sensor cable................................................................................... 71
Procedure............................................................................................................................................................................ 71
Post-requisites.....................................................................................................................................................................71
45 Removing the processor liquid-cooling assembly........................................................................... 72
Prerequisites....................................................................................................................................................................... 72
Procedure........................................................................................................................................................................... 72
46 Replacing the processor liquid-cooling assembly........................................................................... 74
6
Procedure........................................................................................................................................................................... 74
Post-requisites.................................................................................................................................................................... 74
47 Removing the processor....................................................................................................................75
Prerequisites....................................................................................................................................................................... 75
Procedure........................................................................................................................................................................... 75
48 Replacing the processor....................................................................................................................76
Procedure........................................................................................................................................................................... 76
Post-requisites.................................................................................................................................................................... 76
49 Removing the power-supply unit.....................................................................................................77
Prerequisites........................................................................................................................................................................77
Procedure............................................................................................................................................................................77
50 Replacing the power-supply unit.....................................................................................................79
Procedure........................................................................................................................................................................... 79
Post-requisites.................................................................................................................................................................... 79
51 Removing the system board..............................................................................................................80
Prerequisites....................................................................................................................................................................... 80
Procedure........................................................................................................................................................................... 80
52 Replacing the system board..............................................................................................................82
Procedure........................................................................................................................................................................... 82
Post-requisites.................................................................................................................................................................... 82
53 Removing the handle bars................................................................................................................ 83
Prerequisites....................................................................................................................................................................... 83
Procedure........................................................................................................................................................................... 83
54 Replacing the handle bars................................................................................................................ 87
Procedure............................................................................................................................................................................87
Post-requisites.................................................................................................................................................................... 87
55 Removing the front bezel ................................................................................................................ 88
Prerequisites....................................................................................................................................................................... 88
Procedure........................................................................................................................................................................... 88
56 Replacing the front bezel................................................................................................................. 90
Procedure...........................................................................................................................................................................90
Post-requisites....................................................................................................................................................................90
57 Removing the rear bezel................................................................................................................... 91
Prerequisites........................................................................................................................................................................91
Procedure............................................................................................................................................................................91
7
58 Replacing the rear bezel...................................................................................................................94
Procedure........................................................................................................................................................................... 94
Post-requisites....................................................................................................................................................................94
59 Removing the base panel..................................................................................................................95
Prerequisites.......................................................................................................................................................................95
Procedure...........................................................................................................................................................................95
60 Replacing the base panel..................................................................................................................98
Procedure........................................................................................................................................................................... 98
Post-requisites.................................................................................................................................................................... 98
61 Removing the top tron-lighting cable.............................................................................................. 99
Prerequisites....................................................................................................................................................................... 99
Procedure........................................................................................................................................................................... 99
62 Replacing the top tron-lighting cable............................................................................................ 101
Procedure..........................................................................................................................................................................101
Post-requisites...................................................................................................................................................................101
63 Removing the bottom tron-lighting cable......................................................................................102
Prerequisites..................................................................................................................................................................... 102
Procedure......................................................................................................................................................................... 102
64 Replacing the bottom tron-lighting cable......................................................................................104
Procedure......................................................................................................................................................................... 104
Post-requisites.................................................................................................................................................................. 104
65 Removing the antenna cables.........................................................................................................105
Prerequisites..................................................................................................................................................................... 105
Procedure......................................................................................................................................................................... 105
66 Replacing the antenna cables.........................................................................................................108
Procedure......................................................................................................................................................................... 108
Post-requisites.................................................................................................................................................................. 108
67 Downloading drivers.......................................................................................................................109
Downloading the audio driver.........................................................................................................................................109
Downloading the graphics driver....................................................................................................................................109
Downloading the USB driver........................................................................................................................................... 110
Downloading the chipset driver.......................................................................................................................................110
Downloading the network driver......................................................................................................................................111
68 BIOS setup program........................................................................................................................112
Boot Sequence..................................................................................................................................................................112
Navigation keys.................................................................................................................................................................112
8
BIOS overview...................................................................................................................................................................112
Entering BIOS setup program.......................................................................................................................................... 112
System setup options.........................................................................................................................................................113
System and setup password..............................................................................................................................................116
Assigning a system password and setup password.....................................................................................................116
Deleting or changing an existing system and or setup password..............................................................................117
Clearing CMOS Settings............................................................................................................................................. 117
Clearing Forgotten Passwords.................................................................................................................................... 118
69 Troubleshooting...............................................................................................................................119
Flashing the BIOS..............................................................................................................................................................119
Flashing BIOS (USB key)..................................................................................................................................................119
Enhanced Pre-Boot System Assessment (ePSA) diagnostics..........................................................................................119
Running the ePSA diagnostics.................................................................................................................................... 119
Diagnostics........................................................................................................................................................................120
Wi-Fi power cycle............................................................................................................................................................120
70 Getting help and contacting Alienware......................................................................................... 121
9
Before working inside your computer
NOTE: The images in this document may differ from your computer depending on the configuration you ordered.
Before you begin
1. Save and close all open files and exit all open applications.
2. Shut down your computer. Click Start > Power > Shut down.
NOTE: If you are using a different operating system, see the documentation of your operating system for shut-down
instructions.
3. Disconnect your computer and all attached devices from their electrical outlets.
4. Disconnect all attached network devices and peripherals, such as keyboard, mouse, and monitor from your computer.
5. Remove any media card and optical disc from your computer, if applicable.
6. After the computer is unplugged, press and hold the power button for 5 seconds to ground the system board.
Safety instructions
Use the following safety guidelines to protect your computer from potential damage and ensure your personal safety.
NOTE: Before working inside your computer, read the safety information that shipped with your computer. For more safety
best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
NOTE: Disconnect all power sources before opening the computer cover or panels. After you finish working inside the
computer, replace all covers, panels, and screws before connecting to the electrical outlet.
CAUTION: To avoid damaging the computer, ensure that the work surface is flat and clean.
CAUTION: To avoid damaging the components and cards, handle them by their edges, and avoid touching pins and
contacts.
CAUTION: You should only perform troubleshooting and repairs as authorized or directed by the Dell technical assistance
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. See the safety instructions
that shipped with the product or at www.dell.com/regulatory_compliance.
CAUTION: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such
as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to dissipate static
electricity, which could harm internal components.
CAUTION: When you disconnect a cable, pull on its connector or on its pull tab, not on the cable itself. Some cables have
connectors with locking tabs or thumb-screws that you must disengage before disconnecting the cable. When
disconnecting cables, keep them evenly aligned to avoid bending any connector pins. When connecting cables, ensure that
the ports and connectors are correctly oriented and aligned.
CAUTION: Press and eject any installed card from the media-card reader.
Recommended tools
The procedures in this document may require the following tools:
Philips screwdriver #1
Philips screwdriver #2
Flat-head screwdriver
Plastic scribe
10
Screw list
The following table provides the list of screws that are used for securing different components.
Table 1. Screw list
Component Secured to Screw type Quantity Screw image
Stability foot Computer #6-32x6 2
Security-cable slot latch Computer #6-32x5.2 1
Battery-case door Battery case M2x5.7 1
Battery case Chassis #6-32x5.2 2
Hard-drive assembly Chassis #6-32x6 1
Hard drive Hard-drive bracket #6-32x3.6 4
U.2 fan Hard-drive assembly
bracket
#6-32x6 2
Right AlienFX side-panel
connector assembly
Chassis #6-32x6 2
Right AlienFX side-panel
connector
Bracket #6-32x6 1
Left AlienFX side-panel
connector assembly
Chassis #6-32x6 2
Left AlienFX side-panel
connector
Bracket #6-32x6 1
I/O board Chassis #6-32x6 5
Wireless card Chassis M2x3 1
Top fan Chassis #6-32x6 1
Logo board Chassis #6-32x6 1
11
Component Secured to Screw type Quantity Screw image
Logo board Bracket #6-32x6 6
Solid-state drive System board M2x2.5 1
PCI fan Chassis M3x5.25 2
Fan shroud PCI fan M5x10 4
Processor liquid-cooling
assembly
Chassis M5x10 4
Power-supply unit Chassis #6-32x6 4
System-board Chassis #6-32x6 9
Rear-handle bar Chassis #6-32x6.5 14
Front-handle bar Chassis #6-32x6.5 14
Bottom-handle bar Chassis #6-32x6.5 14
Front bezel Chassis #6-32x6 5
Rear bezel Chassis #6-32x6 4
Rear bezel Chassis M3x5 3
Base panel Chassis #6-32x6 4
Base panel Chassis #6-32x6 5
Antennas Chassis #6-32x6 6
12
After working inside your computer
CAUTION: Leaving stray or loose screws inside your computer may severely damage your computer.
1. Replace all screws and ensure that no stray screws remain inside your computer.
2. Connect any external devices, peripherals, or cables you removed before working on your computer.
3. Replace any media cards, discs, or any other parts that you removed before working on your computer.
4. Connect your computer and all attached devices to their electrical outlets.
5. Turn on your computer.
13
Technical overview
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working
inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Inside view of your computer
To view the different components installed in your computer. See “
Left view” and “Right view”.
Right view
1.
I/O board (IO BRD) 2. U.2 2.5–inch drive bracket (HDD3/HDD4)
3. drive-bay heat-sensor 4. U.2 2.5–inch drive bracket (HDD1/HDD2)
5. AlienFX side-panel connector 6. rear I/O accessibility lighting batteries
7. 3.5-inch drive bracket (HDD1) 8. 3.5-inch drive bracket (HDD2)
9. 3.5-inch drive bracket (HDD3)
14
Left view
1. processor liquid-cooling assembly fan 2. graphics card
3. system board 4. power-supply unit
5. AlienFX side-panel connector 6. PCI fan
7. processor liquid-cooling assembly pump 8. memory modules
9. top fan
15
System-board components
1. processor liquid cooling-assembly fan (LCM_FAN1) 2. audio connector
3. PCI-Express slot (SLOT1) 4. PCI-Express slot (SLOT3)
5. PCI-Express slot (SLOT4) 6. wireless card slot (M2_WLAN1)
7. PCI-Express slot (SLOT5) 8. PCI-Express slot (SLOT6)
9. solid-state drive slot (M2_SSD1) 10. PCI-Express slot (SLOT7)
11. LED Power Switch (PANEL1) 12. USB connector (USB1)
13. drive-bay heat-sensor connector (SENSOR1) 14. chassis heat-sensor connector (SENSOR2)
15. PCI-Express power connector (PCIE_PWR1) 16. PCI-Express fan 1 connector (PCI_FAN1)
17. password reset jumper (PASSWORD_CLR1) 18. SATA drive connector (HDD_SATA3_4)
19. SATA drive connector (HDD_SATA1_2) 20.USB connector (FUSB3_MB2)
21. USB connector (FUSB3_MB1) 22.U.2 SSD connector
23. coin-cell battery socket (BAT1) 24.CMOS reset jumper (RTC_CLR1)
25.Advanced Technology xTended (ATX) power connector (ATX
PWR1)
26.processor socket (CPU1)
27. memory-module slot (DIMM2) 28.memory-module slot (DIMM1)
29.processor liquid-cooling assembly fan connector (MID_FAN1) 30.top fan connector (TOP_FAN1)
31. processor-power connector (CPU PWR1) 32. processor liquid-cooling assembly pump-fan connector
(PUMP_FAN1)
33. memory-module slot (DIMM3) 34.memory-module slot (DIMM4)
16
I/O-board components
NOTE: The location of the connectors may vary based on the selections you made at the time of purchase.
1. Fan connector (U2_FAN1) 2. Fan connector (U2_FAN2)
3. USB connector (USB1) 4. front I/O connector (USB3_FIO1)
5. front I/O connector (USB3_FIO2) 6. audio connector (AUDIOIO1)
7. rear I/O accessibility lighting battery connector (VBAT1) 8. rear I/O accessibility lighting connector (PORCH_LIGHT1)
9. right theater-lighting connector (POGO_IN_R1) 10. left theater-lighting connector (POGO_IN_L1)
11. logo board connector (LOGO1) 12. main-power connector (PWR1)
13. front I/O control connector (FIO_PWR1)
17
Lifting the computer
Procedure
1. With both hands, hold the handle located on top of the computer.
2. Lift the computer.
18
Removing the stability foot
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working
inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1. Tilt the computer towards the front until the base is facing up.
2. Remove the two screws (#6-32x6) that secure the stability foot to the computer.
3. Lift the stability foot off the computer.
4. Tilt the computer back to the upright position.
19
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121

Alienware Area-51 R4 and R5 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI