Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
SE-HC3
Shelleybasic
TM
by Deleld
Shelleyglas
TM
by Deleld
Shelleysteel
TM
by Deleld
Shelleyspeed
TM
by Deleld
Exterior Top: Constructed of 16-gauge stainless steel,
welded, ground and polished into one integral unit.
Top is fabricated with square exterior corners.
Interior: Well is 8” (20.3cm) deep and creased to
a 1” (2.5cm) diameter drain. Unit is provided with
adapter bars to allow placement of 12” x 20” (30.5cm
x 50.8cm) pans. Adjustable stainless steel pan rest
for flush mount heating or 2” recessed cooling to
accommodate up to 6” deep 12”x20” pans, supplied
by others. Sides are wrapped with refrigeration lines
and insulated with 1” (2.5cm) of environmentally
friendly, Kyoto Protocol Compliant, Non ODP (Ozone
Depletion Potential), Non GWP (Global Warming
Potential) polyurethane foam insulation. Unit is
equipped with drain, gate valve and garden hose
hookup. Stainless steel immersion heater(s) installed
in bottom for wet only heating operation.
Exterior Body: is open frame construction with 16-
gauge stainless steel corners; 18-gauge stainless steel
full bottom shelf and stainless steel C-channel front
and sides for optional accent panels.
Condensing Unit: is suspended below the well
on a 16-gauge steel frame. Condensing unit uses
environmentally friendly HFC-404A refrigerant. Unit
has a single temperature control and a three-way
toggle switch (hot/off/cold) provided in a control
panel. Unit has three-wire electrical junction box
mounted to the underside of the unit.
Casters: Units are mounted on 5” (12.7cm) diameter
swivel casters with non-marking polyolefin tires and
plate brakes. Overall height of caster assembly is 6”
(15.2cm).
Specifications
Standard Features
Options &
Accessories
SES-HC models are 30” overall
Counters are standard with single 8” deep
stainless steel food tank (which can be
switched from heated to chilled operation
with the flip of a switch), condensing unit,
drain with valve, cord and plug, and 5” swivel,
locking casters
Stainless steel immersion heaters with stainless
steel perforated covers
Hot operation requires water in the well
16 gauge stainless steel tops
Open on the operator’s side, furnished with a
full bottom stainless steel shelf
Delfield’s exclusive Delrite™ ABS or laminated
modesty panels in front and ends of unit
Black laminate backs each laminated modesty
panel
Electrical accessories may change listed
amperage and plug
One year parts and 90 day labor standard
warranty. Additional warranties available.
Adapter bars for 12”x20” pans are provided
as standard
•
•
•
•
•
•
•
•
•
•
•
SE-HC2 39” Hot/cold self-contained counter
SE-HC3 50” Hot/cold self-contained counter
SE-HC4 64” Hot/cold self-contained counter
SE-HC5 78” Hot/cold self-contained counter
SE-HC6 92” Hot/cold self-contained counter
•
•
•
•
•
Models
SE-HC/SES-HC
Hot/Cold Self-Contained Combination Counters
SE-HC/SES-HC Hot/Cold Self-Contained Combination Counters
Tray slide
Cutting board
Work shelf
Pin alignment
Food shields
Overshelf
Light fixtures
Heat lamps
115/15A outlet
End shelf
Legs
•
•
•
•
•
•
•
•
•
•
•
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Shelleybasic
TM
by Deleld
Shelleyglas
TM
by Deleld
Shelleysteel
TM
by Deleld
Shelleyspeed
TM
by Deleld
SE-HC/SES-HC
Hot/Cold Self-Contained Combination Counters
Printed in the U.S.A.
DSHC
02/08
Specifications
Model
12”X20”
Pans Held
L D H H.P. Amps NEMA
Plug
Ship
Weight
Freight
Class
SE-HC2 2 39”
99.06cm
29”
73.66cm
36”
91.44cm
1/4 24.0 5-30P 350lbs
158.8kg
100
SE-HC3 3 50”
127cm
29”
73.66cm
36”
91.44cm
1/4 21.0 14-30P 425lbs
192.8kg
100
SE-HC4 4 64”
162.56cm
29”
73.66cm
36”
91.44cm
1/4 21.0 14-30P 500lbs
226.8kg
100
SE-HC5 5 78”
198.12cm
29”
73.66cm
36”
91.44cm
1/4 42.0 14-60P 575lbs
260.8kg
100
SE-HC6 6 92”
233.68cm
29”
73.66cm
36”
91.44cm
1/3 42.0 14-60P 650lbs
294.8kg
100
Add S for 30" high models (example SES-HC).
Side View
(shown with ABS Panel
SE-HC Models
Elevation View
SE-HC Models
Deleld reserves the right to make changes to the design or specications without prior notice.
29.00”
73.66cm
64.00”
162.56cm
36.00”
91.44cm
39.00”
99.06cm
29.00”
73.66cm
29.00”
73.66cm
50.00”
127.00cm
29.00”
73.66cm
64.00”
162.56cm
36.00”
91.44cm
29.00”
73.66cm
78.00”
198.12cm
29.00”
73.66cm
92.00”
233.68cm
Plan View
SE-HC2, SES-HC2
Plan View
SE-HC3, SES-HC3
Plan View
SE-HC4, SES-HC4
Plan View
SE-HC5, SES-HC5
Plan View
SE-HC6, SES-HC6
Elevation View
SES-HC Models
30.00”
76.2cm
-
1
-
2
