Delfield KRB Datasheet

Delfield
Brand
Delfield
Model
KRB
Type
Datasheet

Delfield KRB is a mobile carving counter that is perfect for carving and serving food. It features a one-piece, enclosed molded fiberglass base with fully rounded corners and permanent color. The tray slides and work shelves are reinforced with galvanized bracing and laminated into the fiberglass. The 10” (25.4cm) wide composite fold-down cutting boards provide ample space for carving. The line-up interlock device allows multiple units to be connected together for a continuous serving line. The 14-gauge tops are durable and easy to clean.

Delfield KRB is a mobile carving counter that is perfect for carving and serving food. It features a one-piece, enclosed molded fiberglass base with fully rounded corners and permanent color. The tray slides and work shelves are reinforced with galvanized bracing and laminated into the fiberglass. The 10” (25.4cm) wide composite fold-down cutting boards provide ample space for carving. The line-up interlock device allows multiple units to be connected together for a continuous serving line. The 14-gauge tops are durable and easy to clean.

Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Shelleyglas
TM
by Deleld
Exterior Body is seamless, one-piece molded fiberglass,
having perfectly smooth exterior surface with all corners fully
rounded. The fiberglass reinforced polyester (F.R.P.) is molded
with permanent color. Stress points are internally reinforced.
Exterior Top is constructed of 14-gauge stainless steel,
welded, ground and polished into one integral unit. Top is
fabricated with square exterior corners.
Carving Tray; unit has a removable, stainless steel, perforated
carving tray, pan and meat holder. A 250 watt heat lamp
is mounted directly over the carving tray. Underneath the
carving area is a stainless steel lining for easy cleaning.
Au Jus Well; unit has a 250 watt heated stainless steel au jus
well with adjustable thermostat and stainless steel insert pan.
Heat lamp and au jus well are wired to a 120 volt, 60 Hertz,
single phase, 3-wire grounded, maximum 10’ (3m) cord and
plug.
Dry Compartment; unit has a one-door dry compartment
constructed of 18-gauge stainless steel. Compartment is
equipped with a shelf. Door has double-wall construction, with
a stainless steel front panel.
Casters: units are mounted on 5” (12.7cm) diameter swivel
casters with non-marking polyurethane tires and plate brakes.
Overall height of casters assembly is 6.12” (15.5cm).
Specifications
Standard Features
Options &
Accessories
One piece, enclosed molded fiberglass pylon
(base), fully rounded corners, permanent
color
Corners and center sides reinforced with
galvanized bracing, laminated into the
fiberglass
14-gauge tops
Standard on 5” diameter polyurethane swivel
casters for easy cleaning
Caster mounting plates laminated into base
All body cutouts reinforced with 14-gauge
channel supports
10’ long cord and plug supplied
Stainless steel removable carving tray, heated
au jus well, nonadjustable infrared heat lamp,
dry under storage compartment with hinged
doors
Standard with dry hinged door storage
compartment with shelf
One year parts and 90 day labor standard
warranty
•
•
•
•
•
•
•
•
•
•
KRB - Mobile Carving Counter•
Models
KRB
Mobile Carving Counters
KRB: Mobile Carving Counters
Tray slides and work shelves
10” (25.4cm) wide composite fold-down
cutting boards
Line-up interlock device
120V/60Hz/1ø, 10 amp convenience
outlet with breaker
Stainless steel trim strips
Heated understorage (667 watt heating
element) with stainless steel shelf
Molded fiberglas trim strips
14” x 30” (35.6cm x 76.2cm) stainless
steel end drop shelf
6” (15.2cm) high adjustable stainless
steel bullet feet in lieu of casters
•
•
•
•
•
•
•
•
•
KRB
LO
4
OFF
5
6
HI
3
2
30.00”
76cm
28.00”
71cm
6.12”
15.5cm
36.00”
91cm
18.00”
46cm
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Shelleyglas
TM
by Deleld
KRB
Mobile Carving Counters
Printed in the U.S.A.
DSKRB
10/10
Deleld reserves the right to make changes to the design or specications without prior notice.
Specifications
Model # of Doors # of Shelves V/Hz/Ph Amps Nema Plug Ship Weight
KRB 1 1 120/60/1 5.0 5-15P 180lbs/82kg
Elevation View
Customer Side ViewOperator Side View
LO
4
OFF
5
6
HI
3
2
30.00”
76cm
28.00”
71cm
6.12”
15.5cm
36.00”
91cm
18.00”
46cm
Plan View
  • Page 1 1
  • Page 2 2

Delfield KRB Datasheet

Delfield
Brand
Delfield
Model
KRB
Type
Datasheet

Delfield KRB is a mobile carving counter that is perfect for carving and serving food. It features a one-piece, enclosed molded fiberglass base with fully rounded corners and permanent color. The tray slides and work shelves are reinforced with galvanized bracing and laminated into the fiberglass. The 10” (25.4cm) wide composite fold-down cutting boards provide ample space for carving. The line-up interlock device allows multiple units to be connected together for a continuous serving line. The 14-gauge tops are durable and easy to clean.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents