FF-2

Delfield FF-2, FF-3324 Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Delfield FF-2 Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the exterior of Delfield FF-2 made of?
    What is the material of the inner liner?
    What kind of insulation does Delfield FF-2 have?
    What material are the lids made of?
    How can the height of the self-leveling mechanism be adjusted?
    What accessories are available for Delfield FF-2?
    What is the refrigerant used in the refrigeration system?
    What is the maximum ice cream storage capacity of Delfield FF-2?
PROJECT
ITEM #
QUANTITY DATE
APPROVAL
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
FF
Built-in remote ice cream dispensers
Short form specications
The exterior sides and top edge shall be 20-gauge galvanized steel. Exterior bottom to
be 14-gauge galvanized steel.
Inner liner shall be water-tight and constructed of 22-gauge stainless steel with a
1.25" (3.2cm) I.P.S. drain. Opening(s) shall have throat liners constructed of high impact
plastic. Unit to be insulated with foamed-in-place polyurethane insulation with a non-
conductive top breaker strip.
Each opening shall have an insulated, stainless steel folding lid with high impact plastic
liner, molded rubber edge and black plastic handles.
Each self-leveling mechanism shall be eld adjustable by adding or removing stainless
steel extension springs in the elevator housing inside the unit. The elevators shall be
connected by removable platform carriers constructed of 18-gauge stainless steel.
(6) anodized aluminum divider trays will be supplied per opening. NOTE: See chart on
back for ice cream storage capacity.
Refrigeration system (provided by others) shall use HFC-404A refrigerant. An expan-
sion valve and copper tubing connection to the remote refrigeration system shall be
provided.
NOTE: Temperature and pressure controls are not provided on remote models.
Optional accessories & modications
• Lid locking device
• Wire baskets
This equipment is intended for storage and/or
display of pre-packaged products only.
Model FF-2
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
MSFF 10/01
Built-in remote ice cream dispensers
FF
28.00"
71.1cm
ELEVATION VIEW
MODEL FF-3324
RIGHT END VIEW
ALL FF MODELS
PLAN VIEW
MODEL FF-3324
ELEVATION VIEW
MODEL FF-2
PLAN VIEW
MODEL FF-2
14.50"
36.8cm
26.25"
66.7cm
2.62"
6.7cm
1.87"
4.8cm
28.00"
71.1cm
LENGTH
DEPTH
CUTOUT ORIENTATION
(PLAN VIEW)
12.50"
31.8cm
LID OPENING DETAIL
ALL FF MODELS
REBMUNLEDOM
SNOISNEMIDTUOTUC
)DxL( YTICAPAC
-ESROH
REWOP DAOLUTB
.PAVE
.PMET
PIHS
THGIEW
4233-FF
"00.12x"57.01)1(
mc3.35xmc3.72)1(
ecnuo-eerht012
spucmaerceci
4/1 034
21 F
42 C
sbl512
gk89
2-FF
*"00.12x"57.01)2(
*mc3.35xmc3.72)2(
ecnuo-eerht024
spucmaerceci
3/1 017
41 F
62 C
sbl092
gk231
tuotuchcaeneewteb)mc0.7("57.2seriuqer*
dednemmocereranwohssgnitarrewopesroh;smetsysnoitaregirferetomereriuqersledomFF
28.00"
71.1cm
26.25"
66.7cm
2.62"
6.7cm
1.87"
4.8cm
2.75"
7.0cm
/