Delfield FF-2 Datasheet

Type
Datasheet

This manual is also suitable for

Delfield FF-2: Boost your ice cream storage and display capabilities with this feature-rich ice cream dispenser. Constructed with durable galvanized steel and stainless steel, it ensures longevity and efficient performance. The unit's insulated construction and self-leveling mechanism maintain optimal ice cream temperature and quality. It accommodates six anodized aluminum divider trays for organized storage. Optional accessories like a lid locking device and wire baskets enhance its functionality.

Delfield FF-2: Boost your ice cream storage and display capabilities with this feature-rich ice cream dispenser. Constructed with durable galvanized steel and stainless steel, it ensures longevity and efficient performance. The unit's insulated construction and self-leveling mechanism maintain optimal ice cream temperature and quality. It accommodates six anodized aluminum divider trays for organized storage. Optional accessories like a lid locking device and wire baskets enhance its functionality.

PROJECT
ITEM #
QUANTITY DATE
APPROVAL
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
FF
Built-in remote ice cream dispensers
Short form specications
The exterior sides and top edge shall be 20-gauge galvanized steel. Exterior bottom to
be 14-gauge galvanized steel.
Inner liner shall be water-tight and constructed of 22-gauge stainless steel with a
1.25" (3.2cm) I.P.S. drain. Opening(s) shall have throat liners constructed of high impact
plastic. Unit to be insulated with foamed-in-place polyurethane insulation with a non-
conductive top breaker strip.
Each opening shall have an insulated, stainless steel folding lid with high impact plastic
liner, molded rubber edge and black plastic handles.
Each self-leveling mechanism shall be eld adjustable by adding or removing stainless
steel extension springs in the elevator housing inside the unit. The elevators shall be
connected by removable platform carriers constructed of 18-gauge stainless steel.
(6) anodized aluminum divider trays will be supplied per opening. NOTE: See chart on
back for ice cream storage capacity.
Refrigeration system (provided by others) shall use HFC-404A refrigerant. An expan-
sion valve and copper tubing connection to the remote refrigeration system shall be
provided.
NOTE: Temperature and pressure controls are not provided on remote models.
Optional accessories & modications
• Lid locking device
• Wire baskets
This equipment is intended for storage and/or
display of pre-packaged products only.
Model FF-2
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
MSFF 10/01
Built-in remote ice cream dispensers
FF
28.00"
71.1cm
ELEVATION VIEW
MODEL FF-3324
RIGHT END VIEW
ALL FF MODELS
PLAN VIEW
MODEL FF-3324
ELEVATION VIEW
MODEL FF-2
PLAN VIEW
MODEL FF-2
14.50"
36.8cm
26.25"
66.7cm
2.62"
6.7cm
1.87"
4.8cm
28.00"
71.1cm
LENGTH
DEPTH
CUTOUT ORIENTATION
(PLAN VIEW)
12.50"
31.8cm
LID OPENING DETAIL
ALL FF MODELS
REBMUNLEDOM
SNOISNEMIDTUOTUC
)DxL( YTICAPAC
-ESROH
REWOP DAOLUTB
.PAVE
.PMET
PIHS
THGIEW
4233-FF
"00.12x"57.01)1(
mc3.35xmc3.72)1(
ecnuo-eerht012
spucmaerceci
4/1 034
21 F
42 C
sbl512
gk89
2-FF
*"00.12x"57.01)2(
*mc3.35xmc3.72)2(
ecnuo-eerht024
spucmaerceci
3/1 017
41 F
62 C
sbl092
gk231
tuotuchcaeneewteb)mc0.7("57.2seriuqer*
dednemmocereranwohssgnitarrewopesroh;smetsysnoitaregirferetomereriuqersledomFF
28.00"
71.1cm
26.25"
66.7cm
2.62"
6.7cm
1.87"
4.8cm
2.75"
7.0cm
  • Page 1 1
  • Page 2 2

Delfield FF-2 Datasheet

Type
Datasheet
This manual is also suitable for

Delfield FF-2: Boost your ice cream storage and display capabilities with this feature-rich ice cream dispenser. Constructed with durable galvanized steel and stainless steel, it ensures longevity and efficient performance. The unit's insulated construction and self-leveling mechanism maintain optimal ice cream temperature and quality. It accommodates six anodized aluminum divider trays for organized storage. Optional accessories like a lid locking device and wire baskets enhance its functionality.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI