Danfoss ECL Comfort 110 User guide

Type
User guide

Danfoss ECL Comfort 110 is an advanced controller for hydronic heating systems that offers precise temperature control, customizable schedules, and various optimization features to enhance comfort and energy efficiency. It allows users to easily adjust temperatures, select operation modes, and modify settings for different weekdays. The controller also includes options for setting limits, managing setbacks, and optimizing system performance based on return or room temperature.

Danfoss ECL Comfort 110 is an advanced controller for hydronic heating systems that offers precise temperature control, customizable schedules, and various optimization features to enhance comfort and energy efficiency. It allows users to easily adjust temperatures, select operation modes, and modify settings for different weekdays. The controller also includes options for setting limits, managing setbacks, and optimizing system performance based on return or room temperature.

Quick Guide
ECL Comfort 110, application 130
*087R9782*
*VIKTH102*
DH-SMT/DK VI.KT.H1.02 © Danfoss 05/2016 1
How to navigate?
Adjust temperatures and values.
Switch between menu lines.
Select / return.
2 sec.
Return to daily user menu.
What do the symbols mean?
Mode COMFORT<
Temp. 19@½
1000
The desired ow temperature is inuenced by for example room or return temperature.
The actuator closes the control valve.
The actuator opens the control valve.
The actuator does not activate the valve.
The pump is ON.
The pump is OFF.
The controller is in setback mode.
The controller is in pre-setback mode (the symbol is blinking).
The controller is in comfort mode.
The controller is in pre-comfort mode (the symbol is blinking).
Daily use
Temp.
Adjust the temperature in the actual control
mode.
Mode
Choose mode:
Auto, Comfort, Setback, Standby
Weekday
' '
Schedules with start and stop times of the
comfort periods for each of the weekdays:
Monday, Tuesday, Wednesday, Thursday,
Friday, Saturday, Sunday
Maintenance:
Press the button and hold for 2 sec.
Quick Guide
ECL Comfort 110, application 130
*087R9782*
*VIKTH102*
DH-SMT/DK VI.KT.H1.02 © Danfoss 05/2016 2
Maintenance
Daily use:
Press the button and hold for 2 sec.
Date - time
1000
1000 Date - time
Flow temp.
2000
2175
2176
2177
2178
Slope
Displace
Temp. min.
Temp. max
Room T limit
3000
3015
3182
3183
Intgr. time
Gain - max.
Gain - min.
Return T limit
4000
4030
4035
4036
4037
4085
Limit
Gain - max.
Gain - min.
Intgr. time
Priority
Optimize
5000
5011
5012
5013
5014
Auto-reduct
Boost
Ramp
Optimizer
5020
5021
5081
5179
Based on
Total stop
S1 T lter
Cut-out
Control param.
6000
6174
6184
6185
6186
6187
Motor prot.
Xp
Tn
M1 run
Nz
Application
7000
7010
7022
7023
7024
7052
7077
7078
ECA address
P1 exercise
M1 exercise
Actuator
DHW prior.
P1 frost T
P1 heat T
7093
7141
7162
7189
7198
7199
7600
Standby T
Ext.
Knee point
Min. on time
Daylight
ECL address
Type
Service
8000
8300
8301
8310
8311
8315
8320
Code no.
Ver.
Backlight
Contrast
Language
MOD address
  • Page 1 1
  • Page 2 2

Danfoss ECL Comfort 110 User guide

Type
User guide

Danfoss ECL Comfort 110 is an advanced controller for hydronic heating systems that offers precise temperature control, customizable schedules, and various optimization features to enhance comfort and energy efficiency. It allows users to easily adjust temperatures, select operation modes, and modify settings for different weekdays. The controller also includes options for setting limits, managing setbacks, and optimizing system performance based on return or room temperature.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI