Dell Latitude E5530 Owner's manual

Category
All-in-One workstations
Type
Owner's manual
Dell Latitude E5530
Owner's Manual
Regulatory Model: P28G
Regulatory Type: P28G001
Notes, Cautions, and Warnings

: A NOTE indicates important information that helps you make better use of your computer.
: A CAUTION indicates either potential damage to hardware or loss of data and tells you
how to avoid the problem.
: A WARNING indicates a potential for property damage, personal injury, or death.
© 2013 Dell Inc. All Rights Reserved.
Trademarks used in this text: Dell
, the Dell logo, Dell Boomi
, Dell Precision
, OptiPlex
, Latitude
, PowerEdge
,
PowerVault
, PowerConnect
, OpenManage
, EqualLogic
, Compellent
, KACE
, FlexAddress
, Force10
, Venue
and Vostro
are trademarks of Dell Inc. Intel
®
, Pentium
®
, Xeon
®
, Core
®
and Celeron
®
are registered trademarks of
Intel Corporation in the U.S. and other countries. AMD
®
is a registered trademark and AMD Opteron
, AMD Phenom
and AMD Sempron
are trademarks of Advanced Micro Devices, Inc. Microsoft
®
, Windows
®
, Windows Server
®
,
Internet Explorer
®
, MS-DOS
®
, Windows Vista
®
and Active Directory
®
are either trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries. Red Hat
®
and Red Hat
®
Enterprise Linux
®
are
registered trademarks of Red Hat, Inc. in the United States and/or other countries. Novell
®
and SUSE
®
are registered
trademarks of Novell Inc. in the United States and other countries. Oracle
®
is a registered trademark of Oracle
Corporation and/or its affiliates. Citrix
®
, Xen
®
, XenServer
®
and XenMotion
®
are either registered trademarks or
trademarks of Citrix Systems, Inc. in the United States and/or other countries. VMware
®
, vMotion
®
, vCenter
®
,
vCenter SRM
and vSphere
®
are registered trademarks or trademarks of VMware, Inc. in the United States or other
countries. IBM
®
is a registered trademark of International Business Machines Corporation.
2013 – 12
Rev. A01
Contents
1 ................................................................................. 7
Before Working Inside Your Computer................................................................................................ 7
Turning Off Your Computer..................................................................................................................9


..........................................................................................................9
2  ............................................................................................. 11
Recommended Tools.......................................................................................................................... 11
Removing the SD Card........................................................................................................................ 11
Installing the SD Card.......................................................................................................................... 11
Removing the Battery..........................................................................................................................12
Installing the Battery............................................................................................................................12
Removing the Subscriber Identity Module (SIM) Card....................................................................... 13
Installing the Subscriber Identity Module (SIM) Card......................................................................... 13
Removing the Display Bezel................................................................................................................13
Installing the Display Bezel..................................................................................................................14
Removing the Camera........................................................................................................................ 14
Installing the Camera...........................................................................................................................15
Removing the Display Panel................................................................................................................15
Installing the Display Panel..................................................................................................................17
Removing the Keyboard Trim............................................................................................................. 17
Installing the Keyboard Trim............................................................................................................... 19
Removing the Keyboard..................................................................................................................... 20
Installing the Keyboard....................................................................................................................... 22
Removing the Access Panel................................................................................................................23
Installing the Access Panel................................................................................................................. 24
Removing the Optical Drive............................................................................................................... 24
Installing the Optical Drive................................................................................................................. 26
Removing The Hard Drive...................................................................................................................26
Installing the Hard Drive..................................................................................................................... 28
Removing the WLAN Card..................................................................................................................28
Installing the WLAN Card....................................................................................................................29
Removing the Memory Module..........................................................................................................29
Installing the Memory Module............................................................................................................29
Removing the Right Base Panel..........................................................................................................29
Installing the Right Base Panel........................................................................................................... 30
Removing the Thermal Module..........................................................................................................30
Installing the Thermal Module............................................................................................................ 31
Removing the Processor.....................................................................................................................32
Installing the Processor.......................................................................................................................32
Removing the Palmrest.......................................................................................................................32
Installing the Palmrest.........................................................................................................................34
Removing the ExpressCard Reader Cage.......................................................................................... 35
Installing the ExpressCard Reader Cage............................................................................................ 35
Removing the Bluetooth Module....................................................................................................... 36
Installing the Bluetooth module.........................................................................................................36
Removing the Audio Board.................................................................................................................37
Installing the Audio Board...................................................................................................................37
Removing the Display Assembly.........................................................................................................38
Installing the Display Assembly.......................................................................................................... 40
Removing the Right Support Frame................................................................................................... 41
Installing the Right Support Frame..................................................................................................... 41
Removing the Modem Card............................................................................................................... 42
Installing the Modem Card................................................................................................................. 42
Removing the Left Support Frame..................................................................................................... 43
Installing the Left Support Frame....................................................................................................... 43
Removing the System Board.............................................................................................................. 44
Installing the System Board................................................................................................................ 47
Removing the Coin-Cell Battery........................................................................................................48
Installing the Coin-Cell Battery..........................................................................................................48
Removing the Input/Output (I/O) Board............................................................................................49
Installing the Input/Output (I/O) Board..............................................................................................50
Removing the Power Connector........................................................................................................51
Installing the Power Connector..........................................................................................................52
Removing the System Fan.................................................................................................................. 53
Installing the System Fan.................................................................................................................... 54
Removing the Network Connector....................................................................................................55
Installing the Network Connector Jack............................................................................................. 55
Removing the Speakers...................................................................................................................... 56
Installing the Speakers.........................................................................................................................57
3 .............................................................................................................59
Specifications...................................................................................................................................... 59
4 Docking Port Information....................................................................................65
5 Additional Information..........................................................................................67
6 .................................................................................................................... 69
Overview .............................................................................................................................................69
Entering System Setup........................................................................................................................69
System Setup Options........................................................................................................................ 69
7 ...................................................................................................................79
Diagnostics.......................................................................................................................................... 79
8 Contacting Dell....................................................................................................... 81
6
1

Before Working Inside Your Computer
Use the following safety guidelines to help protect your computer from potential damage and to help to
ensure your personal safety. Unless otherwise noted, each procedure included in this document assumes
that the following conditions exist:
You have read the safety information that shipped with your computer.
A component can be replaced or--if purchased separately--installed by performing the removal
procedure in reverse order.
WARNING: Before working inside your computer, read the safety information that shipped with
your computer. For additional safety best practices information, see the Regulatory Compliance
Homepage at www.dell.com/regulatory_compliance
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or
by periodically touching an unpainted metal surface, such as a connector on the back of the
computer.
CAUTION: Handle components and cards with care. Do not touch the components or contacts
on a card. Hold a card by its edges or by its metal mounting bracket. Hold a component such as a
processor by its edges, not by its pins.
CAUTION: When you disconnect a cable, pull on its connector or on its pull-tab, not on the cable
itself. Some cables have connectors with locking tabs; if you are disconnecting this type of cable,
press in on the locking tabs before you disconnect the cable. As you pull connectors apart, keep
them evenly aligned to avoid bending any connector pins. Also, before you connect a cable,
ensure that both connectors are correctly oriented and aligned.
NOTE: The color of your computer and certain components may appear differently than shown in
this document.
To avoid damaging your computer, perform the following steps before you begin working inside the
computer.
1. Ensure that your work surface is flat and clean to prevent the computer cover from being scratched.
2. Turn off your computer (see Turning Off Your Computer).
7
3. If the computer is connected to a docking device (docked) such as the optional Media Base or
Battery Slice, undock it.
CAUTION: To disconnect a network cable, first unplug the cable from your computer and
then unplug the cable from the network device.
4. Disconnect all network cables from the computer.
5. Disconnect your computer and all attached devices from their electrical outlets.
6. Close the display and turn the computer upside-down on a flat work surface.
NOTE: To avoid damaging the system board, you must remove the main battery before you
service the computer.
7. Remove the main battery.
8. Turn the computer top-side up.
9. Open the display.
10. Press the power button to ground the system board.
CAUTION: To guard against electrical shock, always unplug your computer from the
electrical outlet before opening the display.
CAUTION: Before touching anything inside your computer, ground yourself by touching an
unpainted metal surface, such as the metal at the back of the computer. While you work,
periodically touch an unpainted metal surface to dissipate static electricity, which could
harm internal components.
11. Remove any installed ExpressCards or Smart Cards from the appropriate slots.
8
Turning Off Your Computer
CAUTION: To avoid losing data, save and close all open files and exit all open programs before
you turn off your computer.
1. Shut down the operating system:
In Windows 8:
* Using a touch-enabled device:
a. Swipe in from the right edge of the screen, opening the Charms menu and select
Settings.
b. Select the and then select Shut down
* Using a mouse:
a. Point to upper-right corner of the screen and click Settings.
b. Click the and select Shut down.
In Windows 7:
1. Click Start .
2. Click Shut Down.
or
1. Click Start .
2. Click the arrow in the lower-right corner of the Start menu as shown below, and then click
Shut Down..
2. Ensure that the computer and all attached devices are turned off. If your computer and attached
devices did not automatically turn off when you shut down your operating system, press and hold
the power button for about 4 seconds to turn them off.



 
 



   

:    Dell
 
 Dell

1.


 
, battery slice  media base 
 
ExpressCard 
2. 


:  
 
3. 

4. 






5. 
9
10
2







 
Recommended Tools
The procedures in this document may require the following tools:
Small flat-blade screwdriver
#0 Phillips screwdriver
#1 Phillips screwdriver
Small plastic scribe
Removing the SD Card
1. Follow the procedures in Before Working Inside Your Computer.
2. Press in on the SD card to release it from the computer.
3. Slide the SD card out of the computer.
Installing the SD Card
1. Push the SD card into the compartment until it clicks into place.
2. Follow the procedures in After Working Inside Your Computer.
11
Removing the Battery
1. Follow the procedures in Before Working Inside Your Computer.
2. Slide the battery release latches into the unlock position.
3. Remove the battery from the computer.
Installing the Battery
1. Slide the battery into its slot until it clicks into place.
2. Follow the procedures in After Working Inside Your Computer.
12
Removing the Subscriber Identity Module (SIM) Card
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery.
3. Press and release the SIM card located on the battery wall.
4. Slide the SIM card from the computer.
Installing the Subscriber Identity Module (SIM) Card
1. Insert the subscriber identity module (SIM) card into the slot.
2. Install the battery.
3. Follow the procedures in After Working Inside Your Computer.
Removing the Display Bezel
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery.
3. Pry up the bottom edge of the display bezel.
13
4. Work your way around the sides and top edge of the display bezel. .
5. Remove the display bezel from the computer .
Installing the Display Bezel
1. Place the display bezel onto the display assembly.
2. Starting from the top corner, press on the display bezel and work around the entire bezel until it
snaps onto the display assembly.
3. Install the battery.
4. Follow the procedures in After Working Inside Your Computer.
Removing the Camera
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a) battery
b) display bezel
3. Perform the following steps:
a) Remove the screw that secures the camera and microphone module.
b) Disconnect the camera cable.
c) Lift and remove the camera and microphone module.
14
Installing the Camera
1. Place the camera and microphone module on its place.
2. Connect the camera cable.
3. Tighten the screw to secure the camera and microphone module.
4. Install:
a) display bezel
b) battery
5. Follow the procedures in After Working Inside Your Computer.
Removing the Display Panel
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a) battery
b) display bezel
3. Remove the screws that secure the display panel.
15
4. Flip the display panel over.
5. Lift the Mylar tape and disconnect the LVDS cable from the back of the display panel.
16
6. Remove the display panel from the display assembly.
Installing the Display Panel
1. Install the screws that secure the display brackets to the display panel.
2. Attach the display panel to the display assembly.
3. Align the display panel in its original position in the computer.
4. Connect the low-voltage differential signaling (LVDS) cable to the display panel and attach the tape.
5. Flip the display panel over and install the screws that secure the display panel.
6. Install:
a) display bezel
b) battery
7. Follow the procedures in After Working Inside Your Computer.
Removing the Keyboard Trim
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery.
17
3. Remove the screws at the back of the computer.
4. Pry up the keyboard trim starting from the bottom edge.
5. Work your way around the sides and the top edge of the keyboard trim.
18
6. Lift upwards and remove the keyboard trim from the computer.
Installing the Keyboard Trim
1. Align the keyboard trim to its place.
2. Press along the sides of the keyboard trim until it snaps in place.
3. Install the battery.
4. Follow the procedures in After Working Inside Your Computer.
19
Removing the Keyboard
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a) battery
b) keyboard trim
3. Remove the screw at the back of the computer.
4. Lift the clip to release the keyboard trim from the computer .
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81

Dell Latitude E5530 Owner's manual

Category
All-in-One workstations
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI