Sanyo PDG-DXL100 User manual

Multimedia Projector

MODEL PDG-DXL100

Owner's Manual

English

1

English

Table of Contents

Usage Notice

Precautions ............................................................2

Introduction

Product Features ...................................................5

Package Overview .................................................6

Product Overview .................................................. 7

Projector .............................................................7

Connection Ports ................................................8

Control Panel ......................................................8

Remote Control ...................................................9

Remote Control Battery Installation .................. 12

Remote Control Operating Range ....................12

Installation

Connecting the Projector ..................................... 13

Connect to Computer/Notebook .......................13

Connect to Video ..............................................14

Powering On/Off the Projector ............................. 15

Powering On the Projector ................................15

Powering Off the Projector ................................16

Warning Indicator ..............................................17

Adjusting the Projected Image .............................18

Adjusting the Height of Projector Image ...........18

Adjusting the Projector Focus ........................... 19

Adjusting Projection Image Size ....................... 19

User Controls

On Screen Display ...............................................20

How to operate .................................................20

Image(PC Mode) ..............................................21

Image(Video Mode) ..........................................23

Screen ..............................................................25

Setting ...............................................................27

Setting/Network ................................................30

Language .......................................................... 31

Information ........................................................ 31

Controlling the Projector From Web .................... 32

Conguring the Network Setting ....................... 32

Home Page ....................................................... 35

Control Panel Page ...........................................36

Network Setting Page .......................................37

Security Setting Page .......................................38

Alert Setting Page ............................................. 39

Logout Page .....................................................40

Appendices

Troubleshooting ................................................... 41

Replacing the lamp ..............................................46

Cleaning the Air Filters ........................................48

Specications.......................................................49

Computer Compatibility (Analog) ......................... 50

Computer Compatibility (Digital-HDMI)................51

Congurations of Terminals ................................. 53

Terminal : Analog RGB (Mini D-sub 15 pin) ...... 53

Terminal : Mini DIN 8-pin ..................................53

Regulation & Safety Notices ................................54

Serial Control Interface ........................................56

Operation ..........................................................56

Functional Execution Command ....................... 57

Status Read Command ....................................58

Use of Telnet ........................................................59

PJLink Notice .......................................................60

Dimensions ..........................................................61

Table of Contents

2

English

Usage Notice

Precautions

Follow all warnings, precautions and maintenance as recom-

mended in this user’s guide to maximize the life of your unit.

■ Warning-

This apparatus must be earthed.

■ Warning-

Do not look into the projector’s lens when the

lamp is on. The bright light may hurt your eyes.

■ Warning-

To reduce the risk of re or electric shock, do not

expose this projector to rain or moisture.

■ Warning-

Please do not open or disassemble the projector

as this may cause electric shock.

■ Warning-

When replacing the lamp, please allow unit to

cool down, and follow all replacement instruc-

tions..

■ Warning-

This projector will detect the life of the lamp

itself. Please be sure to change the lamp when it

shows warning messages.

■ Warning-

Reset the “Lamp Counter Reset” function from

the on-screen display “Setting” menu after re-

placing the lamp module (refer to page 29).

■ Warning-

When switching the projector off, please ensure

the cooling cycle has been completed before

disconnecting power. Allow 120 seconds for the

projector to cool down.

■ Warning-

Do not use lens cap when projector is powered

on.

■ Warning-

Turn on the projector rst and then the signal

sources.

■ Warning-

When the lamp reaches the end of its life, it will

burn out and may make a loud popping sound.

If this happens, the projector will not turn back

on until the lamp module has been replaced. To

replace the lamp, follow the procedures listed

under “Replacing the Lamp”.

English

3

English

Usage Notice

■ Warning-

Allowing the proper amount of space on the

top, sides, and rear of the projector cabinet is

critical for proper air circulation and cooling of

the unit. The dimensions shown here indicate the

minimum space required. If the projector is to be

built into a compartment or similarly enclosed,

these minimum distances must be maintained.

1.5' (50 cm)

1.5' (50 cm) 1.5' (50 cm)

3' (1 m)

SIDE and TOP REAR

■ Warning-

Avoid positioning the projector as described

below when installing.

Do not roll the projector more than 9 degrees

from side to side.

Do not pitch the projector more than 15 degrees

from above and below.

Do not point the projector up to project an im-

age.

Do not point the projector down to project an

image.

Do not put the projector on either side to project

an image.

4

English

Usage Notice

Do:

■ Turn off the product before cleaning.

■ Use a soft cloth moistened with mild detergent to clean the

display housing.

■ Disconnect the power plug from AC outlet if the product is not

being used for a long period of time.

Do not:

■ Block the slots and openings on the unit provided for ventila-

tion.

■ Use abrasive cleaners, waxes or solvents to clean the unit.

■ Use under the following conditions:

- Extremely heat, cold or humidity.

- In areas susceptible to excessive dust and dirt.

- Near any appliance generating a strong magnetic eld.

- In direct sunlight.

English

5

English

Introduction

Product Features

This product is an XGA single chip 0.55” DLP

®

projector. Out-

standing features include:

 ■ True XGA, 1024 x 768 addressable pixels

■ Single chip DLP

®

technology

■ NTSC3.58/NTSC4.43/PAL(B/D/G/H/I/M/N)/

SECAM (B/D/G/K/K1/L) and SDTV(480i/576i),

EDTV(480p/576p), HDTV(720p/1080i/1080p) compat-

ible

■ Multi-Auto functions: Auto detection, Auto image and

Auto saving the adjustments

■ Full function remote control

■ User friendly multilingual on screen display

■ Advanced digital keystone correction and high quality

full screen image re-scaling

■ Built-in mono 8-Watt speaker.

■ UXGA, WXGA, SXGA+, SXGA compression and VGA,

SVGA re-sizing

■ Macintosh compatible

Introduction

6

English

Introduction

Power Cable VGA Cable

Wireless Remote Control

Projector with lens cap

Package Overview

This projector comes with all the items shown below. Check to

make sure your unit is complete. Contact your dealer immedi-

ately if anything is missing.

Due to the differ-

ence in applications

for each country, some

regions may have dif-

ferent accessories.

N

o

t

e

Documentation:



CD-ROM User’s Manual



Quick Reference Guide

Cable Factory code

AC Power Cable (for U.S.A.) 42.00105G011

AC Power Cable (for Continental

Europe)

42.00120G011

AC Power Cable (for UK) 42.00110G011

VGA Cable 42.00200G005

2 x AAA Batteries

English

7

English

Introduction

1. Control Panel

2. Remote Sensor

3. Focus Ring

4. Ventilation (outlet)

5. Lens

6. Lens Cap (with String)

7. Ventilation (inlet)

8. Speaker

Projector

Product Overview

1

2

3

7

5

4

6

4

8

7

Air Flow

8

English

Introduction

Connection Ports

SERVICE

PORT

COMPUTER IN 1

COMPONENT IN 1

(

VARIABLE

)

AUDIO OUT

MONITOR OUT

S-VIDEO IN

VIDEO IN

AUDIO IN

COMPUTER IN 2

COMPONENT IN 2

1 2 3 4 5

10 13

1. SERVICE Port

2. HDMI Port

3. S-VIDEO IN Connector

4. VIDEO IN Connector

5. MONITOR OUT Con-

nector

6. COMPUTER IN 2/

COMPONENT 2 Con-

nector

7 8 9

11 12

7. COMPUTER IN 1/

COMPONENT 1 Con-

nector

8. Network Port

9. AUDIO IN Jack

10. AC IN

11. AUDIO OUT Jack

12. Kensington

TM

Lock Port

13. Speaker

Control Panel

1 2 3

4

5

7

8

6

1. TEMP LED

2. LAMP LED

3. POWER LED

4. INPUT Button

5. ON/STAND-BY Button

6. Four Directional Select

Keys

7. ENTER Button

8. MENU Button

6

English

9

English

Introduction

Remote Control

1 Infrared trans-

mitter

Sends signals to the projector.

2 Infrared indica-

tor

Signals indicator for sending.

3 ON/STAND-

BY

Refer to the “Power On/Off the Pro-

jector” section. (See pages 15~16)

4 ENTER Conrm your section of items in sub

menu operation.

2

3

5

15

7

9

11

16

4

17

18

19

20

8

6

12

13

21

22

23

24

10

14

1

10

English

Introduction

5 MENU Press “MENU” to launch the On-

screen display (OSD), back to the top

level of OSD for the OSD main menu

operation

6 IMAGE Select the Image mode from Presenta-

tion, Movie, sRGB, Bright and User.

7 INPUT Press “INPUT” to choose RGB,

SCART, Component, S-Video, Com-

posite and HDMI sources.

8 D.ZOOM - Zoom out the projector display.

9 KEYSTONE

+/-

Adjust the image to compensate for

distortion caused by tilting the projec-

tor.

10 LAMP CON-

TROL

Select the lamp mode. (refer “ECO

Mode” function)

11 AV-MUTE Momentarily turn off/on the audio

and video.

12 COMPUTER 1 Press “COMPUTER 1” to choose

Computer in 1/Component in 1 con-

nector.

13 COMPUTER 2 Press “COMPUTER 2” to choose

Computer in 2/Component in 2 con-

nector.

14 FREEZE Pause the screen image. Press again to

resume the screen image.

15 Four

Directional

Select Keys

Use or or or to select items or

make adjustments to your selection.

16 ASPECT Display the “Aspect Ratio” section of

the on-screen display menu to select

the desired aspect ratio.

17 D.ZOOM + Zoom in the projector display.

18 INFORMA-

TION

Display information menu.

To quick change

remote control code,

press “MENU” and

“IMAGE” buttons

about 10 seconds at the

same time.

N

o

t

e

English

11

English

Introduction

19 VOLUME +/- Increase/decrease speaker volume.

20 Keypad 1~9 For input a password in the “Security

settings”.

21 AUTO. ADJ Automatically synchronize the projec-

tor to the input source.

22 HDMI Press “HDMI” to choose HDMI con-

nector.

23 S-VIDEO Press “S-VIDEO” to choose S-Video

connector.

24 VIDEO Press “VIDEO” to choose Video con-

nector.

12

English

Introduction

Remote Control Battery Installation

Open the battery com-

partment lid.

1

Replace the com-

partment lid.

3

Install new batteries into the

compartment.

2

Two AAA size batteries

For correct polarity (+

and –), be sure battery

terminals are in contact

with pins in the com-

partment.

To ensure safe operation, please observe the following precautions :

■ Use two (2) AAA type batteries.

■ Always replace batteries in sets.

■ Do not use a new battery with a used battery.

■ Avoid contact with water or liquid.

■ Do not expose the remote control to moisture or heat.

■ Do not drop the remote control.

■ If the battery has leaked on the remote control, carefully wipe the case clean and

install new batteries.

■ Risk of an explosion if battery is replaced by an incorrect type.

■ Dispose of used batteries according to the instructions.

■ If the new battery are installed into the compartment within 3~4 hours, the remote

control code will not be returned to default.

■ The original setting will be kept and will not be erased.

Remote Control Operating Range

Point the remote control

toward the projector (In-

frared Remote Receiver)

when pressing any button.

Maximum operating range

for the remote control is

about 39.4’ (12m) and 60° in

top of the projector.

39.4’ (12m)

Approx.30°

Infrared Remote

Receiver is provided

on the top of the pro-

jector.

Point the remote

control from obliquely

above toward the In-

frared Remote Receiver

when operating the

remote control.

N

o

t

e

English

13

English

Installation

SERVICE

PORT

COMPUTER IN 1

COMPONENT IN 1

(

VARIABLE

)

AUDIO OUT

MONITOR OUT

S-VIDEO IN

VIDEO IN

AUDIO IN

COMPUTER IN 2

COMPONENT IN 2

E62405SP

R

Connecting the Projector

Due to the differ-

ence in applications

for each country, some

regions may have differ-

ent accessories.

When AUDIO

OUTPUT is plugged-in,

the projector’s build-in

speaker is not available.-

N

o

t

e

To ensure the projector works well with your computer,

please make sure the timing of the display mode is

compatible with your projector.

1............................................................................................Power cable (supplied)

2................................................................................................................RS232 cable

3...................................................................................................... HDMI-DVI cable

4.............................................................................................. VGA cable (supplied)

5...................................................................................... Audio in cable jack to jack

6....................................................................................Audio out cable jack to jack

7...........................................................................................................Network cable

8.....................................................................................................Monitor out cable

VGA, DVI

Make sure that the

power plug is fully

inserted into both the

projector AC inlet and

the wall outlet.

The AC outlet must

be near this equipment

and must be easily ac-

cessible.

N

o

t

e

1

2 43

6

5

Connect to Computer/Notebook

8 7

Audio Output

Monitor Output

14

English

Installation

SERVICE

PORT

COMPUTER IN 1

COMPONENT IN 1

(

VARIABLE

)

AUDIO OUT

MONITOR OUT

S-VIDEO IN

VIDEO IN

AUDIO IN

COMPUTER IN 2

COMPONENT IN 2

E62405SP

R

Due to the differ-

ence in applications

for each country, some

regions may have differ-

ent accessories.

When AUDIO

OUTPUT is plugged-in,

the projector’s build-in

speaker is not available.

N

o

t

e

To ensure the projector works well with your computer,

please make sure the timing of the display mode is

compatible with your projector.

1............................................................................................Power cable (supplied)

2...............................................................................................................HDMI cable

3............................................................................................ Composite video cable

4...................................................................................... Audio in cable jack to jack

5....................................................................................Audio out cable jack to jack

6............................................................................................................ S-Video cable

Video Output

S-Video Output

DVD player, Set-top Box

HDTV receiver

Make sure that the

power plug is fully

inserted into both the

projector AC inlet and

the wall outlet.

The AC outlet must

be near this equipment

and must be easily ac-

cessible.

Other than the

analog RGB signal,

COMPUTER IN

1/2-COMPONENT IN

1/2 Connectors can

be used to project the

incoming Component

and RGB Scart signals.

(See Page 49 for the

Optional Parts.)

N

o

t

e

1

2 43

6 5

Connect to Video

Audio Output

English

15

English

Installation

Powering On the Projector

1. Ensure that the power cable and signal cable are securely

connected. The POWER LED will turn orange.

2. Remove the lens cap. 

3. Turn on the lamp by pressing “ON/STAND-BY” on the

control panel.  The POWER LED will now ash green.

The startup screen will display in approximately 5 seconds.

When disappear startup screen, the POWER LED will turn

green.

4. Turn on your source (computer, notebook, video player,

etc.) The projector will detect your source automatically.

If you connect multiple sources at the same time, use the

“INPUT” on the remote control or use “COMPUTER 1”,

“COMPUTER 2”, “S-VIDEO”, “VIDEO”, “HDMI” on the

remote control to switch inputs.

Powering On/Off the Projector

Turn on the projector

rst and then the signal

sources.

N

o

t

e

Lens Cap Power

1

2

16

English

Installation

Powering Off the Projector

1. Press the “ON/STAND-BY” to turn off the projector lamp,

you will see a message as below on the on-screen display.

2. Press the “ON/STAND-BY” again to conrm.

3. The cooling fan continues to operate for about 60 seconds for

cooling cycle and the POWER LED will ash green. When

the light starts ashing orange, the projector has entered

standby mode.

If you wish to turn the projector back on, you must wait

until the projector has completed the cooling cycle and has

entered standby mode. Once in standby mode, simply press

“ON/STAND-BY” to restart the projector.

4. Disconnect the power cable from the electrical outlet and the

projector.

5. Do not turn on the projector immediately following a power

off procedure.

English

17

English

Installation

Warning Indicator

 When the “TEMP” LED indicator turns red, it indicates the

projector has overheated. The projector will automatically

shut itself down.

 When you see the message below displays on-screen, the

projector has detected that the lamp is approaching its end

of life. Please change the lamp as soon as possible or contact

your local dealer or our service center.

 When the “TEMP” LED indicator ashes red and the mes-

sage below displays on-screen, it indicates the fan failed.

Stop using the projector and disconnect the power cable

from the electrical outlet, then contact your local dealer or

our service center.

18

English

Installation

Adjusting the Projected Image

Adjusting the Height of Projector Image

The projector is equipped with adjustable feet to raise and lower

the image to ll the screen.

To raise/lower the image:

1. Use  to ne-tune the display angle.

You can raise the

projector front up to 3

degrees by rotating the

adjustable feet.

N

o

t

e

1

Front Adjustable feet

Rear Adjustable feet

1

Maximun Length:7mm

Maximun Length:2mm

English

19

English

Installation

40"

(101.6cm)

100"

(254.0cm)

110"

(279.4cm)

1.624'

4.466'

4.060'

(0.495m)

(1.361m)

(1.237m)

Lens Center

H

A

Lens Center

H : A = 6.78

B ÷ H x 100% = 115%(Offset)

B

Diagonal

Focus Ring

Adjusting the Projector Focus

To focus the image, rotate the focus ring until the image is clear.

The projector will focus at distances from 1.62 to 12.46 feet (0.5

to 3.8 meters) with mechanical travel.

Adjusting Projection Image Size

This graph is for user’s reference only.

Screen (Diagonal)

40” (101.6cm) 100” (254.0cm) 110” (279.4cm)

Screen Size (WxH)

cm

32.0” x 24.0”

(81.3 x 61.0cm)

80.0” x 60.0”

(203.2 x 152.4cm)

88.0” x 66.0”

(223.5 x 167.6cm)

Distance

1.624’ (0.495m) 4.060’ (1.237m) 4.466’ (1.361m)

Page is loading ...

Sanyo PDG-DXL100 User manual

This manual is also suitable for

Sanyo PDG-DXL100 User manual

Related papers

Other documents