The Land of Nod Hampshire Spindle Toddler Rail Assembly Instructions Manual
- Category
- Baby furniture
- Type
- Assembly Instructions Manual
• Failure to follow these warnings and assembly instructions could result in serious injury or death.
• Read all instructions before assembling toddler rail. Keep instructions for future use.
• Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding
under an infant.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless
otherwise advised by your physician.
Strangulation Hazard:
• Strings can cause strangulation! DO NOT place items with a string, cord or ribbon around a child’s neck,
such as hood strings or pacifier cords. DO NOT suspend strings over crib or toddler bed, or attach strings to
toys for any reason.
• To help prevent strangulation, tighten all fasteners. A child can trap parts of the body or clothing on loose
fasteners.
• DO NOT place crib or toddler bed near windows where cords from blinds or drapes may strangle a child.
Fall Hazard:
• When child is able to pull to standing position, set mattress to lowest position and remove bumper pads,
large toys and other objects that could serve as steps for climbing out.
• When child is able to climb out or reaches the height of 35 inches (90 cm), the crib shall no longer be used
and the child should be placed in a youth or regular bed.
CAUTION: ANY MATTRESS USED IN THIS CRIB
MUST BE AT LEAST 27-1/4 INCHES (69 cm) BY 51-5/8
INCHES (131 cm) WITH A THICKNESS NOT EXCEEDING
6 INCHES (15 cm).
• Check this product for damaged hardware, loose joints, missing pats or sharp edges before and after
assembly and frequently during use. Securely tighten loose bolts and other fasteners. DO NOT use crib if any
parts are missing, damaged, or broken. Contact The Land of Nod® for replacement parts and instructional
literature if needed. DO NOT substitute parts.
• If refinishing, use a non-toxic finish specified for children’s products.
• Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
• Infants can suffocate in gaps between crib sides and a mattress that is too small.
• Periodically check to see that all bolts are securely tightened.
• To clean toddler rail: Wipe with clean soft cloth dampened with a mild cleanser and water. Rinse with clean
water using a soft cloth, and dry thoroughly.
• Follow warnings on all products in a toddler rail.
• When a vaporizer is in use, always aim vapor steam away from the toddler rail as well as away from other
wood furniture.
WARNING:
!
!
WARNING:
!
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: [email protected] • www.landofnod.com
Hampshire Spindle Toddler Rail Assembly Instructions
Made in Vietnam - r06
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: [email protected] • www.landofnod.com
Hampshire Spindle Toddler Rail Assembly Instructions
Page 1 of 7
Made in Vietnam - r06
This page lists the contents included in the box. Please take
time to identify the hardware as well as the individual
components of the product. As you unpack and prepare for
assembly, place the contents on a carpeted or padded area
to protect them from damage. Please follow the assembly
instructions closely. Improper assembly can result in
personal or property damage.
Note: 2 adults are required to safely assemble this product.
WARNING:
CHOKING HAZARD - SMALL PARTS
Small parts present in unassembled state.
Adult assembly required.
1 - Large Allen
wrench
1 - Small Allen
wrench
1 - Toddler rail
4 - Small
bolts
1 - Bracket
2 - Spring
washers
2 - Half-moon
brackets
2 - Large bolts
Remove each support pin from corresponding corner as shown. Set hardware aside until further instructions.
1
2
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: [email protected] • www.landofnod.com
Hampshire Spindle Crib Assembly Instructions
Page 2 of 7
Made in Vietnam - r06
With the assistance of another adult, remove mattress panel from corresponding support pins of crib assembly. From the
top of mattress panel, unfasten bolt caps off each support pin with a small Allen wrench. Set hardware and components
aside until further instructions.
3
4
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: [email protected] • www.landofnod.com
Hampshire Spindle Toddler Rail Assembly Instructions
Page 3 of 7
Made in Vietnam - r06
With assistance of another adult, carefully disassemble side panel of crib assembly. Set aside for storage.
Release 1 side panel from crib assembly. Using a small Allen wrench, unfasten 1 small bolt through each bracket from
top assembly as shown. Using a large Allen wrench, unfasten 1 large bolt, 1 spring washer and 1 half-moon bracket per
corner from bottom assembly as shown. Set hardware aside until further instructions.
6
5
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: [email protected] • www.landofnod.com
Hampshire Spindle Toddler Rail Assembly Instructions
Page 4 of 7
Made in Vietnam - r06
Using a small Allen wrench, attach 1 small bolt and 1 bracket to left end panel as shown.
Using a small Allen wrench, remove 1 small bolt and 1 bracket from right and left end panels as shown. Set hardware aside
until further instructions. Secure 1 smalll bolt into corresponding hole at the top corners of the end panels with a small Allen
wrench.
left end
panel
7
6
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: [email protected] • www.landofnod.com
Hampshire Spindle Toddler Rail Assembly Instructions
Page 5 of 7
Made in Vietnam - r06
With the assistance of another adult, fit pre-assembled wood dowels of toddler rail into corresponding holes of end panels.
Make sure bracket of each end panel is positioned securely into corresponding slot of toddler rail.
Using a small Allen wrench, secure 1 small bolt through bracket at the top of each toddler rail as shown. Using a large
Allen wrench, secure 1 large bolt, 1 spring washer and 1 half-moon bracket at the bottom of each end panel as shown.
9
8
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: [email protected] • www.landofnod.com
Hampshire Spindle Toddler Rail Assembly Instructions
Page 6 of 7
Made in Vietnam - r06
With the assistance of another adult, insert mattress panel onto corresponding support pins of toddler bed assembly.
From the top of mattress panel, attach bolt caps onto each support pin with a small Allen wrench. Safely store instruc-
tions and unused hardware/components for future use. Assembly is now complete.
Locate lowest hole setting for the toddler bed mattress. Fit each support pin into corresponding corner as shown.
Make sure support pin is securely engaged with assembly.
low
NOTE: Make sure
metal plate of mattress
panel is at the bottom
during assembly
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: [email protected] • www.landofnod.com
Hampshire Spindle Toddler Rail Assembly Instructions
Page 7 of 7
Made in Vietnam - r06
CLEANINGANDCARE:
Cleansurfaceswithadryordampsoftcloth.Donotuseabrasivecleaners. Periodically check and tighten hardware as necessary.
Once the crib is in use, periodically check to make sure all bolts are tight, and tighten as necessary. Keep these
instructions for future use.
MAINTENANCE
Upon completion of assembly, be sure all screws, bolts and fastening devices have been tightened securely.
Periodically repeat this check to make sure all screws, bolts and fastening devices are tight. Before each usage or
assembly, inspect crib for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use crib if parts
are missing or broken. DO NOT substitute parts. DO NOT make any alteration to this crib.
CLEANING
Mix together a mild solution of gentle dishwashing liquid and water, apply to crib surface using a soft clean cloth
lightly dampened in the solution. Rinse with clean water again using a soft clean cloth, then dry all surfaces
thoroughly with a soft dry cloth. NO ABRASIVE CLEANERS, SCOURING PADS, STEEL WOOL OR COARSE RAGS
SHOULD BE USED TO CLEAN THIS FINE FURNITURE.
STORAGE
After completing the assembly process you are advised to read and beware of all WARNINGS, CAUTIONS,
CLEANING, STORAGE, USE AND MAINTENANCE notices contained in these instructions. For long term storage of
the crib, store in a cool, dry place and keep away from moisture and extreme temperature changes.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
The Land of Nod Hampshire Spindle Toddler Rail Assembly Instructions Manual
- Category
- Baby furniture
- Type
- Assembly Instructions Manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
ducduc VERONA Assembly Instruction Manual
-
Delta Children Eclipse 4-in-1 Crib Assembly Instructions
-
Delta Children Manhattan 3-in-1 Crib Assembly Instructions
-
baby&child BELLINA PANEL CRIB TODDLER BED CONVERSION KIT 105028 User manual
-
Eco-Chic Clover Assembly & Instruction Manual
-
Delta Children Ava 3-in-1 Convertible Crib Assembly Instructions
-
Delta Children Harbor 2 Piece Room-in-a-Box Assembly Instructions
-
Delta Children 7334-A Assembly Instructions
-
Crib Delta Children 4 in 1 Installation guide
-
Delta Children Bennington Sleigh 4-in-1 Crib Assembly Instructions
