ROOMS TO GO 90250312 Assembly Instructions

ROOMS TO GO
Brand
ROOMS TO GO
Model
90250312
Type
Assembly Instructions

This manual is also suitable for

ROOMS TO GO 90250312 is a stunning modern floor lamp that combines style and functionality. With its sturdy metal frame and adjustable height, this lamp is perfect for any room in your home. The included LED bulb provides bright, energy-efficient lighting, while the convenient foot switch makes it easy to turn the lamp on and off. Whether you're reading a book, working on a project, or simply relaxing, ROOMS TO GO 90250312 is the perfect way to add light and style to your space.

ROOMS TO GO 90250312 is a stunning modern floor lamp that combines style and functionality. With its sturdy metal frame and adjustable height, this lamp is perfect for any room in your home. The included LED bulb provides bright, energy-efficient lighting, while the convenient foot switch makes it easy to turn the lamp on and off. Whether you're reading a book, working on a project, or simply relaxing, ROOMS TO GO 90250312 is the perfect way to add light and style to your space.

4218-01/22 1.0
Assembly Instructions (English)
21 Penn Plaza Suite 909 New York,NY 10001
Tel: (212) 736 4440 Fax: (212) 736 4806
www.adessohome.com
ASSEMBLY INSTRUCTION FOR
Collette LED Floor Lamp
Model# 4218-01/ 22
1. Screw tube (B), (C), (D) and (E) together until tight.
2. Place threaded tube of tube (B) through hole on base (A) while gently pulling any
excess cord through base.
Note: The lamp should face forward, with cord coming out of the back of the base.
3. Slowly tilt the lamp on its side to get access to bottom of base in order to tighten it
with washer (G) and nut (H) securely using wrench (I).
4. Screw the handle bar (F) onto the lamp.
5. Connect the adaptor (K) with cord (J).
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
---------------------------------------------------------------
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug as a feature to reduce the risk of electric shock (one blade is
larger than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.Do not use with an
extension cord unless the plug can be fully inserted. DO NOT ALTER THE PLUG .
PARTS DIAGRAM
(1) *handle bar (F) (1) * adaptor (K)
4218-01/22 1.0
INSTRUCCIONES DE ENSAMBLAJE PARA
Collette Lámpara LED de Piso
Modelo# 4218-01/ 22
21 Penn Plaza Suite 909 New York,NY 10001
Tel: (212) 736 4440 Fax: (212) 736 4806
www.adessohome.com
1. Enrosque los postes (B), (C), (D) y (E) hasta que queden apretados.
2. Coloque el tubo roscado del tubo (B) a través del orificio en la base (A) mientras hala
suavemente cualquier exceso de cable a través de la base.
Nota: la lámpara debe mirar hacia adelante, con el cable que sale de la parte posterior
de la base.
3. Incline lentamente la lámpara de lado para tener acceso a la parte inferior de la base y
apretarla firmemente con la arandela (G) y la tuerca (H) usando la llave (I).
4. Enrosque el manubrio (F) en la lámpara.
5. Conecte el adaptador (K) con el cable (J).
INFORMACION GENERAL DEL PRODUCTO:
Este producto es adecuado sólo
para lugares secos.
---------------------------------------------------------------
INSTRUCCIONES IMPORTANTES DE SEGURIDAD:
Esta lámpara portátil tiene un enchufe polarizado (una paleta es más ancha que la otra),
función de seguridad que reduce el riesgo de una descarga eléctrica. Este enchufe encajará
en un tomacorriente polarizado en un sólo sentido. Si el enchufe no entra completamente
en el tomacorriente, invierta el enchufe. Si aún así no encaja, llame a un electricista
calificado. Nunca use un cable de extensión a menos que el enchufe pueda insertarse por
completo. NO MODIFICAR EL ENCHUFE .
-------------------------------------------------------
DIAGRAMA DE PIEZAS
(1) *manubrio (F) (1) * adaptador (K)
  • Page 1 1
  • Page 2 2

ROOMS TO GO 90250312 Assembly Instructions

ROOMS TO GO
Brand
ROOMS TO GO
Model
90250312
Type
Assembly Instructions
This manual is also suitable for

ROOMS TO GO 90250312 is a stunning modern floor lamp that combines style and functionality. With its sturdy metal frame and adjustable height, this lamp is perfect for any room in your home. The included LED bulb provides bright, energy-efficient lighting, while the convenient foot switch makes it easy to turn the lamp on and off. Whether you're reading a book, working on a project, or simply relaxing, ROOMS TO GO 90250312 is the perfect way to add light and style to your space.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents