Winners Only BCA1009 Assembly Instructions

Hello! I've reviewed the assembly instructions for the Winners Only mirror models BCA(BCU)1009 and BCA(BCU)1006. This document provides a step-by-step guide for attaching the mirror to a dresser using the included hardware. I'm ready to answer any questions you have about this process.
What hardware is needed for mirror assembly?

Should assembly be done by one person?

Where should assembly be performed?

ASSEMBLY INSTRUCTIONS

BCA(BCU)1009 / BCA(BCU)1006

Assembly:

1. Secure mirror support (A) to the dresser using flat washer (D) , spring washer (C)

and machine bolt (B).

2. Mount mirror on the dresser.

3. Secure mirror support (A) to the dresser using flat washer (D), spring washer (C)

and machine bolt (B).

A.MIRROR SUPPORT 2PCS B.1" MACHINE BOLT 8PCS C.SPRING WASHER 8PCS D.FLAT WASHER 8PCS

Hardware List:

DCB

position for BCA(BCU)1006

Caution : Please read instructions thoroughly before unpacking assembly parts. Sharp,

exposed staple tips can cause injury, therefore, for your protection, please remove

any exposed staples used in packing.

Please keep all hardware parts out of the reach of children.

1. We recommend that you should assemble this product with the assistance of another person;this will make assembly easier, and will

help to eliminate damage to the product or injury to persons during assembly.

2. Be sure to check all packing materials carefully for small parts that may have come loose inside the carton during shipment.

3. Please do not over tighten screws or bolts.

4. Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to assemble your newly purchased

product correctly and efficiently.

Thank you for purchasing Winners Only Inc. product.

