2. Hay
  3. CPH 190 DESK

Hay CPH 190 DESK User manual

  • Hello! I've reviewed the instruction manual for the HAY CPH 190 table. The document details the assembly process, from identifying the parts to using glue and screws for a secure build. It also specifies the drying time and the need of two people to handle it when turning the table over. I'm ready to answer your questions about the product.
  • How long should I leave the table to dry before using it?
    How many people are recommended to turn the table over?
    What kind of glue should be used?
DESIGN BY RONAN & ERWAN BOUROULLEC
 INSTRUCTION MANUAL 
CPH 190
L150 X W70 X H74
 PARTS 
A Table top x1
B
Leg x2
C
Leg x2
H Allen key
D
Screw
x2
E
Screw
x4
F
Screw
x4
G
Glue
Protect the table top from scratches and other damage while assembling.
1.
Add glue
G to the marked surfaces and dowels.
B
C
2.
Position parts
B and
C as indicated.
B
C
3.
Place the screw
D in the middle of the hole.
4.
Insert the screws
E in the holes.
5.
Tighten the screws
E with the Allen key
H . Before use, leave the table to dry for 60
minutes, and remove any remaining glue.
Repeat steps 1 - 5 at the other end of the table.
7.
Turn the table over. (2 persons recommended).
8.
 CARE & MAINTENANCE 
Our Care & Maintenance offers guidance for optimal
maintenance of your HAY product. It includes advice
and instructions on cleaning and caring for specific
materials to prolong the life of your furniture.
Please find our Care & Maintenance
guide by scanning the QR code
You can find more relevant information
on CPH 190 Desk by scanning
the QR code
You can also find the same information here
hay.dk/downloads
Havnen 1 8700 Horsens Denmark
+45 3164 6000 / hay@hay.com
10012023
/