Noblesse DOTWACBTX16001 User manual
- Category
- Power banks
- Type
- User manual
BATTERY PACK User manual
User manual
Thank you for purchasing the battery pack. It is a rechargeable device designed to store energy
from USB charging port and use that power to charge mobile devices including, but not limited
to , smart phones, tablets PCs and MP3 players. Please read the manual carefully before using this
product and be sure to keep this manual in a safe place for future reference.
Use guidelines
- Please read this manual carefully before using the product.
- Be sure to select the proper connector for your device.
- Only use an adapter that matches the input specifications of the battery pack. Using the
wrong adaptors may damage the device.
Safety precautions
- Do not expose the battery pack to prolonged high temperatures over 50C.
- Do not short circuit the battery pack
- Do not store or transport the device near sharp objects that may puncture the battery
pack
- Keep the battery pack away from water and fire. If the battery pack becomes wet unplug
the cables immediately.
- Do not use the battery pack if there is electrolyte leakage, strange odor, overheating,
color change or any other abnormal occurrences.
package
- Wireless battery pack
Micro-USB C TYPE 5V/2.1A input
USB 5V/2A output
Power button
- Usb cable
- User manual
-
Operation guide
- Charging the battery pack
1-1. charging via USB Cable : plug the USB cable into a USB adaptor that can plug into
a wall outlet or computer. Plug the USB end of the charging adaptor cable into the
adapter and the micro-USB end of cable into the battery pack input port.
1-2. when the battery pack in being charged the capacity indication lights will flash.
When it is fully charged, the lights will stop flashing
- Charging your mobile devices
1-1. Check the remaining capacity of the battery pack. If the capacity is low, charge it
first.
1-2. Select the correct connector from the USB output of the battery pack to your
mobile device.
1-3. plug the connector into your mobile device and the plug the cable into the USB
output port of the battery pack.
1-4. the battery pack will be turned on automatically and start charging the mobile
device
2-1. Check the remaining capacity of the battery pack. If the capacity is low, charge it
first.
2-2. Put the mobile device on the battery pack
2-3. Push the power button during 1 second and start charging the mobile device
- Automatic shut down
The battery pack will turn off automatically when it no longer detects a device to charge.
Products specifications
- Model number DOTWACBTX16001
- KCC Registration No. MSIP-RMM-SHQ-DOTWACBTX16001
- Battery type Li-ion polymer battery
- Nominal input 5V/2.1A
- Nominal output 5V/2A
- Wireless output 5V/1A
FCC Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
con-nected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution
Modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC Compliance Information : This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation
IMPORTANT NOTE:
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment.
The antennas used for this transmitter must be installed to provide a separation distance of at
least 10Cm from all persons and must not be co-located or operating in conjunction with any
other antenna or transmitter.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this equipment near water.
6) Do not using near any heat sources such as radiators, heat resisters, stove, or other
equipment that produce heat.
European CE notice to users and product statements
This product is CE marked according to the provisions of the R&TTE
Directive(99/5/EC). Hereby, Shinan Information Communication declares
that this product is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
For further information, please contact http:// www.shinangroup.co.kr
Shinan Information Communication
7-3, Dangsan-ro 148beon-gil, Gunpo-si, Gyeonggi-do, Korea
Tel: 82-70-7699-1801
Fax: 82-31-458-1802
URL: [email protected]
-
1
-
2
-
3
-
4
-
5
-
6
-
7
Noblesse DOTWACBTX16001 User manual
- Category
- Power banks
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Casio IT-300 User manual
-
AT&T PB7400 User manual
-
Philips SHB2515WT/00 User manual
-
CyberPower Systems CPBC10400 User manual
-
Insignia NS-MB12002 | NS-MB12002-C Quick setup guide
-
Skyrc Q200 User manual
-
Makita XRM08B User manual
-
Sony HDR-PJ410 User manual
-
Mophie Juice Pack PowerStation User manual
-