Nyne Home Audio NH-5000 User manual

Brand: Nyne

Model: Home Audio NH-5000

Category: Docking speakers

Type: User manual

This manual is also suitable for

NH-5000

nyne.com

User Manual

Manual del usuario

Manuel utilisateur

Série Home Audio

Serie de audio para

el hogar

Home Audio Series

English

Contents

1 Important 4

Safety 4

Notice 5

2 Introduction 8

What is Bluetooth technology? 8

Introduction to NH-5000 8

Overview 9

3 Preparation 12

Unpack 12

Connect power 12

Get the remote control ready

for use 12

Turn on the device 13

4 Operation 14

Use basic volume controls 14

Play and charge your iPod/

iPhone/iPad through the device 14

Listen from a Bluetooth

connected device 15

Listen from an auxiliary device 17

5 Specifications 18

6 Frequently asked questions (FAQ) 19

4EN

1 Important

Safety

The lightning ﬂ ash with

arrowhead symbol within

an equilateral triangle

is intended to alert the

user to the presence of un-isolated,

dangerous voltage within the inside of

the device that may be of sufﬁ cient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point

within an equilateral

triangle is intended

to alert the user to the presence

of important operating and

servicing instructions in the literature

accompanying the device.

Read these instructions before

operation.

Keep these instructions for future

reference.

Follow all instructions for installation,

use and maintenance of the device.

To avoid tilt or drop, place the device

on a ﬂ at and hard surface.

To clean the device, disconnect

power ﬁ rst. Clean only with soft and

dry cloth.

To ensure compatibility, only use

accessories recommended by the

manufacturer.

When the device is suddenly moved

from cold to warm surroundings,

condensation may form in the housing

of the device. Before use, leave the

device in the warm environment until

the moisture evaporates.

Keep the device away from heat

sources, such as a radiator, heater,

oven, ampliﬁ er, naked ﬂ ames or direct

sunlight.

Never block any ventilation openings.

• Do not expose the device to sand

or dust, or cover it with items, such

as newspapers, table cloths, or

curtains.

• Do not operate the device in an

enclosed cabinet. Leave sufﬁ cient

free space around the device for

adequate ventilation.

Keep the device away from

moisture. Never expose the device

to rain, dripping or splashing. If water

penetrates into the device, unplug the

power cord and contact your dealer.

Continuous use in this case may result

in ﬁ re or electric shock.

Make sure that the power supply

voltage is within the range indicated

on the label on the device or power

adapter. If you are not sure of the type

of power supply, consult you dealer or

local power company.

Do not defeat the safety purpose of

the polarized or grounding-type plug.

A polarized plug has two blades with

one wider than the other. A grounding

type plug has two blades and a third

grounding prong. The wide blade or

the third prong is provided for your

safety. If the provided plug does not ﬁ t

into your outlet, consult an electrician

for replacement of the obsolete outlet.

When connected to a power outlet,

power is always ﬂ owing into the

device. To completely disconnect

power, unplug the power cord.

English

When you unplug the power cord,

always hold the plug instead of the

cord.

Do not overload power strips and

extension cords. Overloading can

result in ﬁ re or electric shock.

The wall socket should be located

near the device and be easily

accessible.

Where the mains plug or an appliance

coupler is used as the disconnect

device, the disconnect device shall

remain readily operable.

During lightning storms or when the

device is not to be used for a long

period of time, always unplug the

power cord of the device. Pulling on

the power cord can damage the wires

inside the cord and may cause ﬁ re or

electric shock.

Do not attempt to repair or service the

device yourself. Opening or removing

the cabinet may expose you to

electric shock, and other hazards. If

repair is required, contact your dealer

and refer all servicing to qualiﬁ ed

service personnel.

Do not use the device if any

abnormality occurs. If any smoke or

odor becomes apparent, unplug the

power cord and contact your dealer

immediately. Do not try to repair the

device yourself.

Avoid using dropped or damaged

appliances. If the device is dropped

and the housing is damaged, the

internal components may not function

normally. Unplug the power cord

immediately and contact your dealer

for repair. Continued use of the device

may cause ﬁ re or electric shock.

Before moving the device, make sure

to disconnect the power cord and any

other cables ﬁ rst.

To reduce the risk of electric shock,

do not touch any connector with wet

hands.

Use only with the cart

stand, tripod bracket,

or table speciﬁ ed by

the manufacture, or sold with the

apparatus. When a cart is used,

use caution when moving the cart/

apparatus combination to avoid injury

from tip-over.

Never remove the housing of the

device.

Never lubricate any part of the device.

Never place the device on top of any

other electrical equipment.

Button cell batteries are dangerous if

swallowed! Keep batteries out of the

reach of children.

Notice

Modification

Any modiﬁ cation (such as removing

the speaker grill) to the device,

without prior authorization from the

manufacturer, may void your warranty

and authority to operate the device.

FCC compliance statement

This equipment has been tested and

found to comply with the limits for

a Class B digital device, pursuant

to part 15 of the FCC Rules. These

limits are designed to provide

reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses,

6EN

and can radiate radio frequency

energy and, if not installed and used

in accordance with the instruction

manual, may cause harmful

interference to radio communications.

However, there is no guarantee

that interference will not occur in a

particular installation. If this equipment

does cause harmful interference to

radio or television reception, which

can be determined by turning the

equipment off and on, the user is

encouraged to try to correct the

interference by one or more of the

following measures:

• Relocate the receiving antenna.

• Increase the separation between

the equipment and receiver.

• Connect the equipment into

an outlet on a circuit different

from that to which the receiver is

connected.

• Consult the dealer or an

experienced radio/TV technician

for help.

This device complies with the FCC

Rules.

Operation is subject to the following

two conditions:

1This device may not cause harmful

interference, and

2This device must accept any

interference received, including

interference that may cause

undesired operation.

This device complies with FCC RF

radiation exposure limits set forth for an

uncontrolled environment.

This device and its antenna(s) must not

be co-located or conjunction with any

other antenna or transmitter.

Recycling

Packaging

Observe the local regulations for how

to dispose of the packaging materials.

Old product and battery

The old product shall not be treated

as household waste. Observe the

local regulations, and send the old

product and battery to the applicable

collection point for recycling of

electrical and electronic products

and batteries. Correct disposal of such

products helps prevent potentially

negative consequences on the

environment and human health. For

more information, consult your local

authority or dealer.

This is a CLASS II apparatus with double

insulation, and no protective earth

provided.

“Made for iPod”, “Made for iPhone”,

and “Made for iPad” mean that

an electronic accessory has been

designed to connect speciﬁ cally to

iPod, iPhone, or iPad respectively, and

has been certiﬁ ed by the developer

to meet Apple performance

standards. Apple is not responsible

for the operation of this device or its

English

compliance with safety and regulatory

standards. Please note that the use

of this accessory with iPod, iPhone, or

iPad may affect wireless performance.

iPhone, iPod nano, and iPod touch are

trademarks of Apple Inc., registered in

the U.S. and other countries. iPad is a

trademark of Apple Inc.

The Bluetooth word mark and logos

are owned by the Bluetooth SIG, Inc.

and any use of such marks by Nyne

Multimedia Inc. is under license.

8EN

2 Introduction

What is Bluetooth technology?

Bluetooth® is a wireless technology that

enables wireless data communication

over a short range between digital

devices. In general, Bluetooth-enabled

devices connect wirelessly with each

other within a range of 32 feet (10m).

In order for two Bluetooth-enabled

devices to work together wirelessly

to perform a certain function, both

devices should be compatible with the

same Bluetooth proﬁ le that supports

this function.

Introduction to NH-5000

Thank you for purchasing our product.

This is a Bluetooth wireless docking

speaker system that supports Bluetooth

version 2.1.

This device is compatible with the

following Bluetooth proﬁ les:

• A2DP - (Advanced Audio

Distribution Proﬁ le)

• AVRCP - Audio/Video Remote

Control Proﬁ le

With this device, you can:

• Dock and charge your iPod/

iPhone/iPad.

• Play music from your docked iPod/

iPhone/iPad.

• Play video from your docked iPod/

iPhone/iPad on the large screen

of a TV connected to the device

through component video cables.

• Play music from a Bluetooth-

enabled mobile phone or audio

source that is compatible with

A2DP, such as an iPod/iPhone/

iPad, Android smartphone, PC, or

Mac.

• Play music from a connected

auxiliary device.

English

Overview

Main unit

1 indicator

•Light up in dock mode.

2 indicator

•Light up in Bluetooth mode.

•Light up in 3.5mm audio input (AUX)

mode.

4 indicator

•Light up in RCA audio input mode.

5 touch button

•Turn on the device or switch to

standby mode.

6 touch button

•Select an audio source: iPod

(dock), BT (Bluetooth), AUX (3.5mm

audio input), or RCA (white/red

audio input).

7 Volume touchpad

•Swipe to the left or right to

decrease or increase volume.

10 EN

•Turn on or off power supply to the

device.

•Connect the power adapter to AC

mains.

•Connect to an auxiliary device,

such as a TV, DVD player, through

audio cables (white/red; not

supplied).

•Connect to a TV through

component video cables (red/

blue/green; not supplied).

@ Dock for iPod/iPhone/iPad

•Connect to an auxiliary device,

such as an MP3 player, through the

supplied 3.5mm audio cable.

$ Power/status indicator

•Stay red in standby mode.

•In Bluetooth mode, ﬂ ash blue when

no Bluetooth connection has been

set up.

•In Bluetooth mode, stay blue after

successful Bluetooth connection.

•Flash red and blue brieﬂ y during

any source or setting change.

•Stay blue in dock, MP3, or RCA

audio input mode.

Remote control

•Turn on the device or switch to

standby mode.

•Turn up/down volume.

•In dock/Bluetooth mode, press to

skip to the previous or next song.

•In dock/Bluetooth mode, press and

hold to fast forward or backward.

•In dock/Bluetooth mode, pause or

resume music/video play.

Mute Power

Vol+

Vol-

iPod BT

AUX RCA

Movie POP

Classic Rock

English

5 Source selection keys

•Select an audio source: iPod

(dock), BT (Bluetooth), AUX (3.5mm

audio input), or RCA (white/red

audio input).

6 Keys of sound effect selection

•Select a sound effect: movie, pop,

classic, or rock.

•Mute or resume sound output.

12 EN

3 Preparation

Unpack

Unpack and identify the items of your

package.

• 1 x Bluetooth docking speaker

• 1 x remote control (with one

CR2025 button cell battery)

• 1 x AC power adapter

• 1 x 3.5mm audio cable

• 1 x User Manual

• 1 x Quick User Guide

• 1 x warranty card

Connect power

Warning:

•Make sure that the power supply

voltage is within the range

indicated on the rating label at the

back of the device.

•If you need other connections

(such as the audio and video

connection), complete these

connections before power

connection.

*)/4

Connect the power adapter.

•round connector to the

socket on the back of the device

•power plug to the wall socket

Get the remote control ready for

use

Warning:

•To reduce the risk of explosion,

keep batteries away from heat,

sunshine, or ﬁ re.

•To reduce the risk of damage,

remove the battery when the

remote control is not to be used for

a long period of time.

Remove the protective tab on the

battery cover at the back of the

remote control.

English

To replace the remote control battery:

1Remove the battery cover.

2Replace the old battery with a

new one (type: CR2025) with the

correct polarity.

3Mount the battery cover securely.

Turn on the device

1Turn the switch on the

back of the device to the

position.

☞The power/status indicator on the

front of the device lights up red.

2Press on the remote control

(or tap on the top panel).

☞The indicator of the last selected

audio source lights up.

☞The volume indicator bars on the

volume touchpad light up.

☞The power/status indicator ﬂ ashes

red and blue alternately for a short

while, and then stays blue.

Tip:

•If the device switches on to the

Bluetooth source, the power/status

indicator ﬂ ashes blue when no

Bluetooth connection has been

set up.

To switch the device to standby mode:

• Press on the remote control

(or tap on the top panel) again.

14 EN

4 Operation

Use basic volume controls

You can use the basic volume controls

in any audio input mode, such as

dock, Bluetooth, 3.5mm audio input

(AUX), and RCA.

•Press on the remote

control repeatedly (or swipe the

volume touchpad on the top panel to

the left or right) to adjust volume.

☞The volume indicator bars on

the volume touchpad change

accordingly as the volume

increases/decreases.

•Press on the remote control once

to mute sound output.

•Press on the remote control

again to resume sound output.

•Press , , , or

on the remote control to select your

preferred sound effect.

Play and charge your iPod/

iPhone/iPad through the device

You can play and charge the

following iPod, iPhone, and iPad

models through this device:

Made for.

• iPad 2

• iPad

• iPhone 4S

• iPhone 4

• iPhone 3GS

• iPod nano (3rd, 4th, 5th, and 6th

generation)

• iPod touch (3rd, and 4th

generation)

Note:

•If you have a protective case on

your iPod/iPhone/iPad, you may

need to remove it ﬁ rst.

Dock your iPod/iPhone/iPad

Connect your iPod/iPhone/iPad to the

dock connector.

☞The device switches to the dock

source automatically.

☞The indicator on the top panel

lights up.

☞The device starts to charge your

iPod/iPhone/iPad.

Play music from your iPod/iPhone/iPad

When you dock your iPod/iPhone/

iPad onto the device, music play

starts automatically as long as there

is music in your iPod library. If music

play does not start automatically, start

music play on your iPod/iPhone/iPad

manually.

English

During music play, you can:

• Press on the remote

control to skip to the previous/next

song.

• Press and hold on the

remote control to fast forward/

backward in a song.

• Press on the remote control to

pause or resume music play.

Play video from your iPod/iPhone/iPad

1Connect the device to a TV with

component video cables (red/

blue/green; not supplied).

2Start video play on your iPod/

iPhone/iPad.

☞The video is played on the TV with

sound output from the Bluetooth

docking speaker.

During video play, you can:

• Press and hold on the

remote control to fast forward/

backward.

• Press on the remote control to

pause or resume video play.

To switch to video play on your iPod/iPhone/iPad:

• Press and hold on the remote

control.

To switch back to video play on the TV:

• Press and hold on the remote

control again.

Listen from a Bluetooth

connected device

Pair with a Bluetooth-enabled device

Before using the Bluetooth feature of

NH-5000 for the ﬁ rst time, you need to

pair NH-5000 with another Bluetooth-

enabled device, such as an iPod/

iPhone/iPad, Android smartphone, PC,

or Mac.

Note:

•Make sure that NH-5000 and the

device to be paired are located

within the detectable range (32

feet or 10m).

16 EN

1Press on the remote control

(or tap on the top panel

repeatedly) to enter Bluetooth

mode.

☞The power/status indicator ﬂ ashes

blue.

☞The indicator on the top panel

lights up and starts to ﬂ ash.

☞The speaker enters pairing mode

automatically.

2Enable the Bluetooth function on

your device to be paired with

NH-5000.

☞The device to be paired with NH-5000

enters Bluetooth searching mode.

☞After a while, “NYNE NH-5000” is

displayed in the list of Bluetooth

equipment on the device to be

paired with NH-5000.

3Select “NYNE NH-5000”on the

device to be paired with NH-5000

to start pairing (if required, enter the

password “0000”).

☞After successful pairing and

connection, the indicator on the

top panel stops ﬂ ashing and the

power/status indicator turns to blue

steadily.

Tip:

•After successful pairing and ﬁ rst-

time connection, if your paired

device fails to connect with NH-5000

automatically the next time, you may

need to select the device name of

NH-5000 from the list of Bluetooth

equipment on your paired device to

set up Bluetooth connection again.

Play music from a Bluetooth connected device

Notes:

•To play/control music wirelessly

through the Bluetooth docking

speaker, make sure that your

device paired with NH-5000 is

compatible with Bluetooth proﬁ les

A2DP/AVRCP. Check the user

manual of your paired device for

details.

•Make sure that Bluetooth

connection has been set up

between the paired device and

NH-5000.

Start music play on your device paired

and connected with NH-5000.

☞You can hear music streamed

to the Bluetooth docking

speaker.

During music play, you can:

• Press on the remote

control to skip to the previous/next

song.

• Press on the remote control to

pause or resume music play.

English

To use the (white/red) sockets:

1Connect audio cables (white/red;

not supplied).

•one end to the

(white/red) sockets on the back of

the device

•the other end to the audio out

(white/red) sockets on an auxiliary

device

2Press on the remote control

(or tap on the top panel

repeatedly) to select the RCA

audio input source.

☞The indicator on the top panel

lights up.

3Start music play on the auxiliary

device.

Listen from an auxiliary device

You can listen to music from an auxiliary

device through either the 3.5mm audio

input socket ( ) on the right side of

the dock or the (white/red)

sockets on the back panel of the Bluetooth

docking speaker.

To use the 3.5mm audio input socket:

Note:

•Make sure that the auxiliary device

has a 3.5mm headphone socket.

1Connect the supplied 3.5mm

audio cable.

•one end to the 3.5mm audio input

socket ( ) on the right side

of the dock

•the other end to the 3.5mm

headphone socket on an auxiliary

device

☞The indicator on the top panel

lights up.

☞The device switches to 3.5mm

audio input (AUX) mode

automatically.

2Start music play on the auxiliary

device.

18 EN

5 Specifications

The technical speciﬁ cations are

subject to change without prior notice.

General

AC power Input:

100-240V~50/60Hz

1500mA

Output: 22V

2500mA

Power

consumption

50W

Standby power

consumption

0.8W

Dimensions (W x

D x H)

400mm x 167mm x

203mm

Weight 3.5kg (net)

Amplifier

Output power

(L/R CH nominal)

2 x 15 W + 30 W

Frequency

response (L/R

CH)

30Hz - 20kHz at +/-

3dB

Sensitivity (L/R) 500mV

Signal to noise

ratio

75dB

English

• Check whether the sound output

is muted. Press on the remote

control to resume sound output.

• Make sure that you have selected

an audio source for play.

• If you have selected the dock

source, check whether you have

docked your iPod/iPhone/iPad

securely. If you have a protective

case on your iPod/iPhone/iPad,

remove it and try again.

• If you have selected the Bluetooth

source, check whether the

Bluetooth connected device

supports Bluetooth proﬁ le A2DP.

Check the user manual of the

device for details.

• If you have selected the Bluetooth

source, check whether wireless

connection has been set up

between the paired device and

NH-5000.

• If you are listening from an auxiliary

device, check the following points:

•Make sure that you have started

music play on your auxiliary device.

•Try to adjust volume on your

auxiliary device.

•Check whether the 3.5mm audio

cable or audio cables (white/red)

have been connected securely

to both the Bluetooth docking

speaker and auxiliary device.

Why is there no picture or only distorted picture on the

TV?

• Check whether you have

connected component video

cables to both the device and TV.

• Check whether the TV is switched

on.

• Check whether you have selected

the correct video input source on

the TV.

6 Frequently asked

questions (FAQ)

Never try to repair the device yourself

as you may void your warranty. When

you encounter any problems, read the

FAQ before you take the device for

repair. You may also visit www.nyne.

com/support for help.

Contact your dealer if any of the

following occurs:

•The power cord frays or fails.

•Liquid sprays or any object drops

into the device.

•The device is exposed to rain or

other moisture.

•The device is dropped or damaged

in any way.

•The performance of the device

changes substantially.

Why is there no power?

• Check whether you have

connected the power cable to

both the device and wall socket

securely.

• Check whether the mains power is

interrupted.

• Check whether you have turned

the switch on the back

of the device to the position.

Why is there no sound or only distorted sound?

• Press on the remote

control repeatedly (or swipe the

volume touchpad on the top

panel to the left or right) to adjust

volume.

• Press , , , or

on the remote control repeatedly

to adjust the sound effect.

20 EN

Why is it that I cannot control music play through

NH-5000?

• Check whether the paired device

supports Bluetooth proﬁ le AVRCP.

See the user manual of the device

for details.

• Check whether the video is being

played on the screen of your iPod/

iPhone/iPad. If so, press and hold

on the remote control to switch

to video play on the TV.

• Adjust the aspect ratio on the TV.

Why is there no response when I use the remote control to

operate the device?

• Move closer to the device and try

again.

• Aim the remote control directly at

the front of the device.

• The battery may be used up.

Replace the battery with correct

polarity.

Why is my iPod/iPhone/iPad not charged after docking?

• Check whether you have

connected the power cable to

both the device and wall socket

securely.

• Check whether you have docked

your iPod/iPhone/iPad securely.

• Check whether you have turned

the switch on the back

of the device to the position.

Why is it that I cannot find “NYNE NH-5000” on the device

already paired with NH-5000?

• Check whether you have turned

on NH-5000.

• Make sure that you have enabled

the Bluetooth function on the

device paired with NH-5000.

• You may have failed to pair the

device with NH-5000. Repeat the

pairing procedures.

• Check whether NH-5000 is

connected wirelessly with another

paired device. NH-5000 only

supports one Bluetooth connection

at a time.

Page is loading ...

Nyne Home Audio NH-5000 User manual

Brand: Nyne

Model: Home Audio NH-5000

Category: Docking speakers

Type: User manual

This manual is also suitable for

Download PDF

report

in other languages

français: Nyne Home Audio NH-5000 Manuel utilisateur
español: Nyne Home Audio NH-5000 Manual de usuario

Nyne Home Audio NH-5000 User manual

This manual is also suitable for

Nyne Home Audio NH-5000 User manual

in other languages

Other documents