2. Concept2
  3. RowERG
RowERG

Concept2 RowERG Assembly Instructions

  • I've reviewed the Concept2 RowErg assembly instructions and am ready to assist you with any questions. This document includes the list of parts, dimensions, weight capacity and assembly steps for the RowErg rowing machine, including how to attach the legs. I can help with understanding the instructions, clarifying the assembly process, and providing other information included in the document.
  • What is the weight capacity of the RowErg?
    What are the dimensions of the RowErg?
    What size space is required to use the RowErg?
1
Questions? Comments? Problems?
Contact Concept2 directly at 800.245.5676 (US and Canada)
Or visit us online: concept2.com
PN 1118
PN 1117
12
Weight: 57 lb (26 kg)
Dimensions: 8 ft x 2 ft (244 cm x 61 cm)
Space Required for use: 9 ft x 4 ft (274 cm x 122 cm)
Weight Capacity: 500 lb (227 kg) as tested by Concept2*
*300 lb (135 kg) as tested per European Stationary Fitness
Equipment Testing Standard EN 20957-7
ASSEMBLY INSTRUCTIONS
WITH STANDARD LEGS
PN 1735
x 8
3/4” (1.9 cm)
PN 2233
Long Leg 23.5” (60 cm)
PN 1118
T-27 DRIVER
PN 2230
(4) 3/4” (1.9 cm)
PN 2233
(4) 3/4” (1.9 cm)
PN 2233
ASSEMBLY TIP
Do not fully
tighten screws
until all screws
are in place.
PARTS *not to scale
Concept2, Inc. 105 Industrial Park Drive Morrisville, Vermont USA 05661 concept2.com/contact
c2vt.com/rowassembly
0123
RowErg Assembly Instructions
2
3
How to Use the Device Holder
Insert
device
Pinch and
release to
remove
device.
Loosen knob
to slide lower
bracket up or
down.
Important:
Tighten knob
when device
is in place.
/