WALLENSTEIN by EMB Mfg.
Rev # 211216
2019T012 WP265. RevA Parts Manual.090915.indd
EMB Manufacturing Inc.
4144 Boomer Line · St. Clements, On · N0B 2M0 · Canada
Ph: (519) 699-9283 · Fax: (519) 699-4146
www.embmfg.com
Refer to the operators
manual for safe opera-
tion and maintenance
WP265 Wood Processor
Parts Manual
Starting with S/N 670011
WALLENSTEIN by EMB Mfg.2019T012 WP265. RevA Parts Manual.090915.indd
Rev # 211216Page 2 of 20 For threaded parts installation, refer to the torque charts in this manual.
Foreword
EMB Mfg. has prepared this parts manual to assist customers in
ordering quality OEM replacement parts.
Proper and regular service and replacing old, worn or broken parts
with the correct Wallenstein parts are essential to prolonging the life
of your Wallenstein product. Please refer to this manual before
ordering any replacement parts.
All information contained in this parts manual is based on the latest
product specification available at the time of printing this manual.
If your product differs from the specifications contained within this
manual contact EMB Mfg. for information.
EMB reserves the right to alter specifications on their products at
any time.
Reproduction of this parts manual of any kind is prohibited without
prior written permission from EMB Mfg.
Note: Products with factory installed light kits will have a VIN number
included. The last six numbers of this VIN number are the splitters
serial number
Example: 2E9US1112BSXXXXXX
For parts and information please contact your dealer. If your dealer is no longer
availalble please go to our website: http://www.embmfg.com and click on ”FIND A
DEALER NEAR YOU” for information on a local dealer.
Refer to the operators
manual for safe opera-
tion and maintainance
Table of Contents
Contents
SPLITTER CHUTE ASS’Y ................................................................................... 3
SPLITTER CRADLE ASS’Y ................................................................................ 4
THREE POINT HITCH FRAME ASS’Y ............................................................... 5
LOG CHUTE ASS’Y ............................................................................................ 6
LOG HOLD DOWN ASSEMBLY ......................................................................... 7
LEAD IN CHUTE ASEEMBLY ............................................................................. 8
HYDRAULIC SPLITTER ASS’Y ......................................................................... 9
HYDRAULIC LINES .......................................................................................... 10
HYDRAULIC VALVES ........................................................................................11
HYDRAULIC CYLINDER .................................................................................. 12
HYDRAULIC CYLINDER SEAL KIT #SLK-4525 ............................................. 12
HYDRAULIC WINCH ......................................................................................... 13
WINCH DRUM DETAIL ..................................................................................... 14
WINCH FAIRLEAD DETAIL .............................................................................. 14
LABELS ............................................................................................................ 15
HYDRAULIC SCHEMATIC ................................................................................ 18
ACCESSORIES ................................................................................................. 19
WALLENSTEIN by EMB Mfg.
Page 3 of 20
Rev # 211216 For threaded parts installation, refer to the torque charts in this manual.
2019T012 WP265. RevA Parts Manual.090915.indd
16
10
9
1
15
2
12
6
5
8
14
7
3
Item Part Number Description Qty
1 2019W993 Chute, Extension 1
2 2071L188 Plate,Spring Mount 1
3 2071W104 Splitter Chute 1
5 2071W114 Chute Adjuster 1
6 Z11232 Hitch Pin 5/8 x 4-1/4 2
7 Z12110 Latch Pin 3/16 2
8 Z19909 Rubber Bumper 7/16 x 1 4
Item Part Number Description Qty
9 Z34203 Gas Spring, 10mm x 8.44 Stroke 1
10 Z34204 Ball Stud 13mm x 5/16 2
12 Z72221 Hex Lock Nut, 5/16NC 2
14 Z72251 Hex Lock Nut, 1/2NC 2
15 Z76121 Flange Bolt, 5/16NC x 3/4 3
16 Z76259 Carriage Bolt, 1/2NC x 1-1/4 2
Splitter Chute Ass’y
WALLENSTEIN by EMB Mfg.2019T012 WP265. RevA Parts Manual.090915.indd
Rev # 211216Page 4 of 20 For threaded parts installation, refer to the torque charts in this manual.
21
23
24
25
22 32
30
17
35
36
40
28
20
38
32
37
31
39
34
19
18
29
33
26
27
21
23
24
25
22 32
30
17
35
36
40
28
20
38
32
37
31
39
34
19
18
29
33
26
27
BOM ID Part No. Description Qty
17 2019W994 Weldment, Main Splitter 1
18 2071W532 Wedge 4 Way 1
19 2071W533 Wedge Position Handle 1
20 2071W111 Arm Wedge Lifter 2
21 2071W190 Log Stop Whip 1
22 2071M123 Roller Wedge Lift 1
23 2071S126 Edge,Log Table 1
24 Z11232 Hitch Pin, 5/8" x 4-1/4" 1
25 Z12110 Lynch Pin, 3/16" 1
26 Z12441 Snap Lock Pin, 1/2" x 4-1/2" 1
27 Z19321 Grip, 1" x 5" 1
28 Z34204 Ball Stud, 13mm x 5/16NC 1
29 Z71330 Hex Bolt, 3/8NC x 3" 2
30 Z71515 Hex Bolt, 1/2NC x 1-1/2" 4
31 Z72221 Hex Lock Nut, 5/16NC 1
32 Z72231 Hex Lock Nut, 3/8NC 8
33 Z72251 Hex Lock Nut, 1/2NC 6
34 Z72531 Serrated Flange Locknut, 3/8NC 4
35 Z72551 Serrated Flange Locknut, 1/2NC 4
36 Z75233 FHCS, 3/8NC x 1" 6
37 Z76153 Flange Bolt, 1/2NC x 1" 4
38 Z76231 Carriage Bolt, 3/8NC x 1" 4
39 Z76259 Carriage Bolt, 1/2NC x 1-1/4" 2
40 Z29202 Grease Zerk 1/4NF 1
Splitter Cradle Ass’y
WALLENSTEIN by EMB Mfg.
Page 5 of 20
Rev # 211216 For threaded parts installation, refer to the torque charts in this manual.
2019T012 WP265. RevA Parts Manual.090915.indd
39
55
41
43
40
53
48
50
37
42
47
46
36
38
45
57
52
51
44
54
56
49
44
Item Part Number Description Qty
36 2018W801 WP 3PH Frame Adapter 1
37 2018W802 WP 3PH Base 1
38 2019L922 SMV Post 1
39 2072W395 Valve Mount 1
40 Z11142 Toplink Pin, 1 x 4-5/16 1
41 Z11442 Implement Pin, 1-1/8 x 7/8NF 2
42 Z12140 Latch Pin 7/16 3
43 Z19907 3/4 - 1-1/8 Nylon coated Gripper clip 2
44 Z71512 Hex Bolt, 1/2NC x 1-1/4 10
45 Z72211 Hex Lock Nut, 1/4NC 2
46 Z72221 Hex Lock Nut, 5/16NC 2
47 Z72251 Hex Lock Nut, 1/2NC 10
48 Z72282 Hex Lock Nut, 7/8-14NF 2
49 Z72551 Flange Nut 1/2NC 4
50 Z73381 Lock Washer, 7/8 2
51 Z76153 Flange Bolt, 1/2NC x 1 6
52 Z76221 Carriage Bolt, 5/16NC x 3/4 2
53 Z76712 Self-tapping Screw #10 2
54 Z78301 Machine Screw, 1/4-20NC x 3/4 2
55 Z96601 Sign, SMV 1
56 Z96602 Spade - SMV 1
57 Z96605 SMV Spade & Socket 1
Three Point Hitch Frame Ass’y
WALLENSTEIN by EMB Mfg.2019T012 WP265. RevA Parts Manual.090915.indd
Rev # 211216Page 6 of 20 For threaded parts installation, refer to the torque charts in this manual.
63
64
74
77
78
79
71
65
72
72
66
61
73
70
62
69
76
69
58
60
67
68
75
59
63
64
74
77
78
79
71
65
72
72
66
61
73
70
62
69
76
69
58
60
67
68
75
59
BOM ID Part No. Description Qty
58 2071L123 Clevis, Latch Mount 1
59 2071L504 Hose Clamp, 2x 1/42
60 2071S506 Saw Guide 1
61 2071W121 Arm,Log Chute Lock 1
62 2072W011 Chute, Log 1
63 5081A100 Hydraulic Winch Assembly 1
64 Z12110 Lynch Pin, 3/16" 1
65 Z34203 Gas Spring, 10mm OD x 540mm x 215mm x 158 lbs 2
66 Z34204 Ball Stud, 13mm x 5/16NC 2
67 Z71210 Hex Bolt, 5/16NC x 1" 2
68 Z71512 Hex Bolt, 1/2NC x 1-1/4" 1
69 Z71515 Hex Bolt, 1/2NC x 1-1/2" 8
70 Z71530 Hex Bolt, 1/2NC x 3" 1
71 Z72221 Hex Lock Nut, 5/16NC 2
72 Z72251 Hex Lock Nut, 1/2NC 16
73 Z72531 Serrated Flange Locknut, 3/8NC 2
74 Z72551 Serrated Flange Locknut, 1/2NC 2
75 Z76153 Flange Bolt, 1/2NC x 1" 4
76 Z76232 Carriage Bolt, 3/8NC x 1-1/4" 2
77 Z76259 Carriage Bolt, 1/2NC x 1-1/4" 2
78 Z76712 Self-tapping Screw, #10 x 3/4" 3
79 Z96503 Manual Tube 3-1/2 Short 1
Log Chute Ass’y
WALLENSTEIN by EMB Mfg.
Page 7 of 20
Rev # 211216 For threaded parts installation, refer to the torque charts in this manual.
2019T012 WP265. RevA Parts Manual.090915.indd
84 82
83 84
85
80
81 84 82
83 84
85
80
81
BOM ID Part No. Description Qty
80 2071W102 Hold Down Bottom 1
81 2071W110 Log Hold Down Long 1
82 2071W112 Pin, Log Hold Down 1
83 2071W136 Pin,Log Hold Down 1
84 Z29202 Grease Zerk 1/4NF 4
85 Z92311 1/4" Chain x 21" 1
Log Hold Down Assembly
WALLENSTEIN by EMB Mfg.2019T012 WP265. RevA Parts Manual.090915.indd
Rev # 211216Page 8 of 20 For threaded parts installation, refer to the torque charts in this manual.
95
91
94
99
100
92
93
96
101
98
97
Item Part Number Description Qty
91 2071W101 Chute, Lead In 1
92 2071W118 Chute, Bottom 1
93 2071W122 Foot,Jack 2
94 Z12441 Snapper Pin 1/2 x 4-1/2 2
95 Z34204 Ball Stud 13mm x 5/16 2
96 Z71330 Hex Bolt, 3/8NC x 3 2
97 Z72221 Hex Lock Nut, 5/16NC 2
98 Z72231 Hex Lock Nut, 3/8NC 2
99 Z72251 Hex Lock Nut, 1/2NC 2
100 Z76259 Carriage Bolt, 1/2NC x 1-1/4 2
101 Z91515 Side-Wind 10" Jack, No Foot 2
Lead In Chute Aseembly
WALLENSTEIN by EMB Mfg.
Page 9 of 20
Rev # 211216 For threaded parts installation, refer to the torque charts in this manual.
2019T012 WP265. RevA Parts Manual.090915.indd
105
To Work Port "A"
112
104
111
110
To Work Port "B"
108
106
108
102
103
113
109
107
114
109
105
To Work Port "A"
112
104
111
110
To Work Port "B"
108
106
108
102
103
113
109
107
114
109
BOM ID Part No. Description Qty
102 2018F001 1/2" Hose, MP08 x MP08 x 45" 1
103 2019F001 1/2" Hose, MP08 x MP08 x 76" 1
104 2055S517 Cap, Push Block 1
105 2071W531 Weldment, Hvy Push Block 1
106 2071L215 Plate, Cylinder Retaining 1
107 2072C201 Cylinder, 4-1/2 x 36 x 2-1/2 1
108 Z51331 Elbow 90, MP x FPX 0808 2
109 Z51334 Elbow 90, MP x FPX 1208 2
110 Z71555 Hex Bolt, 1/2NC x 5-1/2" 3
111 Z71540 Hex Bolt, 1/2NC x 4" 1
112 Z71576 Hex Bolt, 1/2NF x 1-1/2" G8 3
113 Z72251 Hex Lock Nut, 1/2NC 4
114 Z51195 Socket Plug, MP 12 1
Hydraulic Splitter Ass’y
WALLENSTEIN by EMB Mfg.2019T012 WP265. RevA Parts Manual.090915.indd
Rev # 211216Page 10 of 20 For threaded parts installation, refer to the torque charts in this manual.
117
120
119
121
115
To Winch
118
116
117
120
119
121
115
To Winch
118
116
BOM ID Part No. Description Qty
115 Z51331 Elbow 90, MP x FPX 0808 3
116 Z51334 Elbow 90, MP x FPX 1208 1
117 Z51926 Quick Coupler, FP08 x M ISO 7241-1 2
118 Z52123 1/4" Hose, FJIC06 x MP08 x 45" 2
119 Z52304 1/2" Hose, MP08 x MP08 x 120" 2
120 Z52831 Nipple Cap, ISO 7241-1 x Red 1
121 Z52832 Nipple Cap, ISO 7241-1 x Black 1
Hydraulic Lines
WALLENSTEIN by EMB Mfg.
Page 11 of 20
Rev # 211216 For threaded parts installation, refer to the torque charts in this manual.
2019T012 WP265. RevA Parts Manual.090915.indd
142
148 147
144 "B" Work Port
"A" Work Port
143
"B" Work Port
"A" Work Port
146
145
Note: Replacement valves come
complete with handle.
Item Part Number Description Qty
142 660150004 Handle Kit (Prince) 1
143 Z56209 Valve, Single Function Detent 1
144 Z56214-1 Block only for Z56214 1
145 Z71115 Hex Bolt, 1/4NC x 1-1/2 3
146 Z71320 Hex Bolt, 3/8NC x 2 3
147 Z72511 Hex Flange Nut, 1/4NC 3
148 Z72531 Flange Nut 3/8NC 3
Hydraulic Valves
WALLENSTEIN by EMB Mfg.2019T012 WP265. RevA Parts Manual.090915.indd
Rev # 211216Page 12 of 20 For threaded parts installation, refer to the torque charts in this manual.
Hydraulic Cylinder Seal Kit #SLK-4525
VIEW SHOWS PROPER
SEAL ORIENTATION
Hydraulic Cylinder
214
211
209
206
205
210
204
201
208
212
200
Item Part Number Description Qty
200 2072C2011 Barrel 4-1/2" 1
201 2072C2012 Rod,2-1/2x 1 1
204 568-018 Piston To Rod Seal O-Ring 1" 1
205 568-346 4-1/2"OD X 1/8" CROSS SECTION O-RING 1
206 575-346 4-1/2" Back-Up Ring 1
208 G450-250S 4-1/2" X 2-1/2" GLAND 1
209 P100-450SP 4-1/2" BORE PISTON1
210 PSC-346 4-1/2" Double Acting Piston Seal 1
211 ST-250 2-1/2" Rod Wiper 1
212 UI8-250-37B 2-1/2" X 2-7/8" X 3/8" U-CUP 1
214 Z72292G8 Hex Lock Nut 1NF Grade 8 1
WALLENSTEIN by EMB Mfg.
Page 13 of 20
Rev # 211216 For threaded parts installation, refer to the torque charts in this manual.
2019T012 WP265. RevA Parts Manual.090915.indd
119
107
120
123
104
122
103 118
Note: Replacement winch gears
should be ordered in sets.
Order:
#5081M125 Gear Driven
#5081M126 Drive Gear Hub
117
109
116
121
108
111
114
113
112
106
105 See Detail
Assembly View
110
See Detail
Assembly View
115
119
107
120
123
104
122
103 118
Note: Replacement winch gears
should be ordered in sets.
Order:
#5081M125 Gear Driven
#5081M126 Drive Gear Hub
117
109
116
121
108
111
114
113
112
106
105 See Detail
Assembly View
110
See Detail
Assembly View
115
BOM ID Part No.DescriptionQty
1035081W111 Shield 1
1045081W112 Handle, Winch Clutch 1
1055081W102 Housing, Winch 1
1065081W114 Holder,Brake Pad 1
1075081M126 Drive Gear Hub1
1085012M204 Block, Drum Brake 1
1095081L114 Washer, Motor Shaft1
1105081A101 Fairlead 1
111Z51656 Elbow 90, MJIC x MORB 0610 2
112Z54102 M&S Hydraulic Motor 200 1
113Z46533 Key, 1/4 x 1/4 x 11
BOM ID Part No.Description Qty
114 Z32201 Comp Spring, 10mm OD x 64mm x 0.0475" 2
115 Z92405 60" Winching Strap1
116 Z71535 Hex Bolt, 1/2NC x 3-1/2" 1
117 Z71517 Hex Bolt, 1/2NC x 1-3/4" 2
118 Z76153 Flange Bolt, 1/2NC x 1" 4
119 Z76121 Flange Bolt, 5/16NC x 3/4" 7
120 Z71105 Hex Bolt, 1/4NC x 1/2" 2
121 Z76111 Flange Bolt, 1/4NC x 3/4" 1
122 Z74111 Set Screw, 1/4NC x 1/4" 2
123 Z72251 Hex Lock Nut, 1/2NC7
Hydraulic Winch
WALLENSTEIN by EMB Mfg.2019T012 WP265. RevA Parts Manual.090915.indd
Rev # 211216Page 14 of 20 For threaded parts installation, refer to the torque charts in this manual.
131
126
127
134
132
130
125
133
Note: Replacement winch gears
should be ordered in sets. Order:
#508M125 Gear Driven
#508M126 Drive Gear Hub
124
128
129
131
126
127
134
132
130
125
133
Note: Replacement winch gears
should be ordered in sets. Order:
#508M125 Gear Driven
#508M126 Drive Gear Hub
124
128
129
BOM ID Part No.Descriptio
nQ
ty
1245081M125 Gear, Driven 1
1255081W121Drum, Main Cable 1
126Z25207Z25203 Insert Only 2
127Z25301PF206 Flange Only 4
128Z29202Grease Zerk 1/4N
F1
129Z34302Spring Plunger, 3/8NC x 5/8" x 21 lbs 1
130Z46531Key, 1/4 x 1/4 x
21
131Z72531Serrated Flange Locknut, 3/8NC6
132Z74113Set Screw, 1/4NC x 1/4" 2
133Z76233Carriage Bolt, 3/8NC x 3/4" 6
134Z92112Synthetic Winch Rope 1/4 x 50' with Hook 1
251
250
246
252
248
249
247
251
250
246
252
248
249
247
BOM ID Part No. Description Qty
246 5081W103 Bracket,Fairlead 1
247 5081M109 Bushing, Fairlead Side 2
248 5081M111 Bushing, Fairlead Top 2
249 Z27103 Fiberglide Bearing, 1/2" ID x 1" long x 1/16" wall 8
250 Z71566 Hex Bolt, 1/2NC x 6-1/4" x 5-1/4" Shank 2
251 Z71567 Hex Bolt, 1/2NC x 5" x 4" Shank 2
252 Z72251 Hex Lock Nut, 1/2NC 4
Winch Drum Detail
Winch Fairlead Detail
WALLENSTEIN by EMB Mfg.
Page 15 of 20
Rev # 211216 For threaded parts installation, refer to the torque charts in this manual.
2019T012 WP265. RevA Parts Manual.090915.indd
S50CR
250CR###
Serial Location
#######
#######
Z94242
Z94242 x 1
Z94203 x 1
Z94203
Z94402 x 1
Z94402
Z94119 x 1
Z94124
Z94124 x 1
Z94123
Z94123 x 1
Z94408 x 1
Z94403
Z94403 x 1
Z94228
Z94228 x 1
Z94401 x 1 Z94406 x 1
Z94119 x 1
Control Area Label Layout
Z946120 x 1
Labels
50
Z
9
4
4
2
6
Z94426 x 1
WALLENSTEIN by EMB Mfg.2019T012 WP265. RevA Parts Manual.090915.indd
Rev # 211216Page 16 of 20 For threaded parts installation, refer to the torque charts in this manual.
50
Z
9
4
4
2
6
Z94426 x 2
Z94167
Z94167 x 1
Z946118 x 1
Z946119 x 1
Z94617 x 1
Z94242
Z94242 x 2
Z94163
Z94203 x 1
Z94203
WALLENSTEIN by EMB Mfg.
Page 17 of 20
Rev # 211216 For threaded parts installation, refer to the torque charts in this manual.
2019T012 WP265. RevA Parts Manual.090915.indd
Winch Grease View
50
Z
9
4
4
2
6
Z94426 x 1
50
Z
9
4
4
2
6
Z94426 x 2
1 on each side
Z94243
Z94243 x 1
Z94403
Z94403 x 1
Z94402
Z94402 x 1
WALLENSTEIN by EMB Mfg.2019T012 WP265. RevA Parts Manual.090915.indd
Rev # 211216Page 18 of 20 For threaded parts installation, refer to the torque charts in this manual.
Z56214
Single Spring
Centre Valve
2072C201 Cylinder 4.5 x 36 x 2.5
Z52304
120" (195cm)
Input
Output
A Port
B Port
Input
Output
NPT
12
ORB
10
JIC
06
ORB
10
JIC
06
Z52123
45" (115 cm)
NPT
08
NPT
12
NPT
08
NPT
08
NPT
08
5081A100
Winch
NPT
12
Connection
Type
Connection
Size
Connection Type
PNR –Pioneer Coupler
NPT –National Pipe Thread
JIC –Tube Flare
ORB – “O” Ring Boss
HB –Hose Barb
Fitting Identification
2019F001
76"(193cm)
NPT
12
NPT
08
NPT
12
NPT
08
NPT
08
NPT
08
2018F001
45" (114cm)
Z52123
45" (115 cm)
NPT
08
NPT
08
NPT
08
NPT
08
Output
Input
A Port
B Port
Z56209
Single Spring
Centre Valve
NPT
12
NPT
08
NPT
08
NPT
08
Plug
PNR
08
PNR
08
Z52304
120" (195cm)
Hydraulic Schematic
WALLENSTEIN by EMB Mfg.
Page 19 of 20
Rev # 211216 For threaded parts installation, refer to the torque charts in this manual.
2019T012 WP265. RevA Parts Manual.090915.indd
Call your dealer for pricing and availability
Available as a download at
www.embmfg.com
#299001 48" LOG PEAVEY
Accessories
BY EMB MFG INC.
PRINTED IN CANADA
Rev: 200215 PART NUMBER: Z97087
EMB Manufacturing Inc.
4144 Boomer Line · St. Clements, On · N0B 2M0 · Canada
Ph: (519) 699-9283 · Fax: (519) 699-4146
www.embmfg.com
Wood Processor
MODEL WP235 & WP265
OPERATOR'S MANUAL
WP265
Before putting the Wood Processor into service:
Do not attempt to start or operate the Wood Processor without
recieving full safety training and instruction in its features, opera-
tion and maintenance. See page 4 for Pre-Delivery Procedure.
Keep this manual with the
Wood Processor at all times
WP235
#P200
Available:
P210 Spare Pivoting Chainsaw Adaptor
Save time switching out chainsaws with a
spare adaptor for your second chainsaw!
For all WP Series
Easy mounting to most chain saws, the pivoting
chain saw holder securely holds your saw in place
allowing for easier cutting and saving time handling
your chainsaw.
#P200 PIVOTING CHAINSAW HOLDER
#Z97087
WOOD PROCESSOR
OPERATOR’S MANUAL
#P601 6-WAY WEDGE
#P100 NYLON CHAINSAW HOLSTER
#P300 HYDRAULIC POWER PACK
WALLENSTEIN by EMB Mfg.2019T012 WP265. RevA Parts Manual.090915.indd
Rev # 211216Page 20 of 20 For threaded parts installation, refer to the torque charts in this manual.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Wallenstein WP235 User manual
-
-
-
-
-
-
-
-
-
Other documents
-
Ramsey Winch QM8000 Owner's manual
-
Spartan Equipment SEBXH42 Owner's manual
-
jurop PNE 104 Instructions For Installation, Use And Maintenance Manual
-
Woods TC/TCR74 User manual
-
Woods Equipment TSR44 User manual
-
-
-
Bestway Field Pro III 1600 User manual
-
Wesco 273515 User manual
-
Spartan Equipment SEG420M Owner's manual
